From: Guneshwor Singh <guneshwor.o.singh@xxxxxxxxx>
When creating a FE link, the cpu_dai_name will come from topology and
dpcm will be enabled by default.
Signed-off-by: Mengdong Lin <mengdong.lin@xxxxxxxxxxxxxxx>
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index bdbfcef..ca5f828 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1586,6 +1586,7 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg,
return snd_soc_register_dai(tplg->comp, dai_drv);
}
+/* create the FE DAI link */
static int soc_tplg_link_create(struct soc_tplg *tplg,
struct snd_soc_tplg_pcm *pcm)
{
@@ -1600,6 +1601,15 @@ static int soc_tplg_link_create(struct soc_tplg *tplg,
link->stream_name = pcm->pcm_name;
link->id = pcm->pcm_id;
+ link->cpu_dai_name = pcm->dai_name;
+ link->codec_name = "snd-soc-dummy";
+ link->codec_dai_name = "snd-soc-dummy-dai";
+
+ /* enable DPCM */
+ link->dynamic = 1;
+ link->dpcm_playback = pcm->playback;
+ link->dpcm_capture = pcm->capture;
+
/* pass control to component driver for optional further init */
ret = soc_tplg_dai_link_load(tplg, link);
if (ret < 0) {
--
2.5.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
