Hi,
On 03/28/2016 08:06 PM, Jose Abreu wrote:
This patch adds audio support for the ADV7511 HDMI transmitter
using ALSA SoC.
The code was ported from Analog Devices linux tree from
commit 1770c4a1e32b ("Merge remote-tracking branch
'xilinx/master' into xcomm_zynq"), which is available at:
- https://github.com/analogdevicesinc/linux/
The main core file was renamed from adv7511.c to adv7511_core.c
so that audio and video compile into a single adv7511.ko module
and to keep up with Analog Devices kernel tree.
The audio can be disabled using menu-config so it is possible
to use only video mode.
The HDMI mode is automatically started at boot and the audio
(when enabled) registers as a codec into ALSA.
Is there a reason why we set the mode to HDMI at probe itself?
Shouldn't it be okay to set the mode later once we read the
EDID off the panel?
Some more comments below.
SPDIF DAI format was also added to ASoC as it is required
by adv7511 audio.
Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
---
No changes v1 -> v2.
drivers/gpu/drm/i2c/Kconfig | 11 +
drivers/gpu/drm/i2c/Makefile | 2 +
drivers/gpu/drm/i2c/adv7511.c | 1024 -----------------------------------
drivers/gpu/drm/i2c/adv7511.h | 41 ++
drivers/gpu/drm/i2c/adv7511_audio.c | 310 +++++++++++
drivers/gpu/drm/i2c/adv7511_core.c | 1005 ++++++++++++++++++++++++++++++++++
include/sound/soc-dai.h | 1 +
7 files changed, 1370 insertions(+), 1024 deletions(-)
delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
<snip>
+
+static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+ struct adv7511_link_config link_config;
+ struct adv7511 *adv7511;
+ struct device *dev = &i2c->dev;
+ unsigned int val;
+ int ret;
+
+ if (!dev->of_node)
+ return -EINVAL;
+
+ adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
+ if (!adv7511)
+ return -ENOMEM;
+
+ adv7511->powered = false;
+ adv7511->status = connector_status_disconnected;
+
+ ret = adv7511_parse_dt(dev->of_node, &link_config);
+ if (ret)
+ return ret;
+
+ /*
+ * The power down GPIO is optional. If present, toggle it from active to
+ * inactive to wake up the encoder.
+ */
+ adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
+ if (IS_ERR(adv7511->gpio_pd))
+ return PTR_ERR(adv7511->gpio_pd);
+
+ if (adv7511->gpio_pd) {
+ mdelay(5);
+ gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
+ }
+
+ adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
+ if (IS_ERR(adv7511->regmap))
+ return PTR_ERR(adv7511->regmap);
+
+ ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
+ if (ret)
+ return ret;
+ dev_dbg(dev, "Rev. %d\n", val);
+
+ ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
+ ARRAY_SIZE(adv7511_fixed_registers));
+ if (ret)
+ return ret;
+
+ regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
+ regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
+ packet_i2c_addr);
+ regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
+ adv7511_packet_disable(adv7511, 0xffff);
+
+ adv7511->i2c_main = i2c;
+ adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
+ if (!adv7511->i2c_edid)
+ return -ENOMEM;
+
+ if (i2c->irq) {
+ init_waitqueue_head(&adv7511->wq);
+
+ ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
+ adv7511_irq_handler,
+ IRQF_ONESHOT, dev_name(dev),
+ adv7511);
+ if (ret)
+ goto err_i2c_unregister_device;
+ }
+
+ /* CEC is unused for now */
+ regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
+ ADV7511_CEC_CTRL_POWER_DOWN);
+
+ adv7511_power_off(adv7511);
+
+ i2c_set_clientdata(i2c, adv7511);
+
+#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
+ adv7511_audio_init(&i2c->dev);
+#endif
If we intend to have more audio funcs being used by the core in the
future, it would be nice to have NOP audio funcs rather than having
multiple #ifdef checks in the driver when CONFIG_DRM_I2C_ADV7511_AUDIO
isn't set.
+
+ adv7511_set_link_config(adv7511, &link_config);
+
+ /* Enable HDMI mode */
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
+ ADV7511_HDMI_CFG_MODE_MASK,
+ ADV7511_HDMI_CFG_MODE_HDMI);
+
+ return 0;
+
+err_i2c_unregister_device:
+ i2c_unregister_device(adv7511->i2c_edid);
+
+ return ret;
+}
+
+static int adv7511_remove(struct i2c_client *i2c)
+{
+ struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
Are we missing a call to adv7511_audio_exit() here?
Thanks,
Archit
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum, hosted by The Linux Foundation
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
