Re: [PATCH V2 1/3] ASoC: bcm2835: move to use the clock framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Martin Sperl <kernel@xxxxxxxxxxxxxxxx> writes:

> On 28.01.2016 23:08, Eric Anholt wrote:
>> kernel@xxxxxxxxxxxxxxxx writes:
>>
>>> From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
>>>
>>> Since the move to the new clock framework with commit 94cb7f76caa0
>>> ("ARM: bcm2835: Switch to using the new clock driver support.")
>>> this driver was no longer functional as it was manipulating the
>>> clock registers locally without going true the framework.
>>>
>>> This patch moves to use the new clock framework and also
>>> moves away from the hardcoded address offsets for DMA getting
>>> the dma-address directly from the device tree.
>>>
>>> Note that the optimal bclk_ratio selection to avoid jitter
>>> due to the use of fractional dividers, which is in the
>>> current version has been removed, because not all devices
>>> support these non power of 2 sized transfers, which resulted
>>> in lots of (downstream) modules that use:
>>>    snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2);
>>>
>>> Signed-off-by: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
>>> ---
>>>   sound/soc/bcm/bcm2835-i2s.c |  284 ++++++++++---------------------------------
>>>   1 file changed, 64 insertions(+), 220 deletions(-)
>>>
>>> diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c
>>> index 3303d5f..1c1f221 100644
>>> --- a/sound/soc/bcm/bcm2835-i2s.c
>>> +++ b/sound/soc/bcm/bcm2835-i2s.c
>>
>>> -	dev->i2s_regmap = regmap[0];
>>> -	dev->clk_regmap = regmap[1];
>>> +	/* get the clock */
>>> +	dev->clk_prepared = false;
>>> +	dev->clk = devm_clk_get(&pdev->dev, NULL);
>>> +	if (IS_ERR(dev->clk)) {
>>> +		dev_err(&pdev->dev, "could not get clk: %ld\n",
>>> +			PTR_ERR(dev->clk));
>>> +		return PTR_ERR(dev->clk);
>>> +	}
>>> +
>>> +	/* Request ioarea */
>>> +	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> +	base = devm_ioremap_resource(&pdev->dev, mem);
>>> +	if (IS_ERR(base))
>>> +		return PTR_ERR(base);
>>> +
>>> +	dev->i2s_regmap = devm_regmap_init_mmio(&pdev->dev, base,
>>> +				&bcm2835_regmap_config);
>>> +	if (IS_ERR(dev->i2s_regmap))
>>> +		return PTR_ERR(dev->i2s_regmap);
>>> +
>>> +	/* Set the DMA address - we have to parse DT ourselves */
>>> +	addr = of_get_address(pdev->dev.of_node, 0, NULL, NULL);
>>> +	if (!addr) {
>>> +		dev_err(&pdev->dev, "could not get DMA-register address\n");
>>> +		return -EINVAL;
>>> +	}
>>> +	dma_base = be32_to_cpup(addr);
>>
>> Why aren't we just using mem->start like before?  That seems like an
>> independent change that should be justified on its own.  I'd be ready to
>> ack the patch if that change is removed.
>>
>
> Problem is that we need the VC4 bus-address (0x7e203000),
> which is the actual <reg> value from the device tree without any
> mapping.
>
> Not the ARM MMU visible address mappings that mem->start provides
> (typically 0x20203000 or 0x3f203000 for bcm2836)
>
> Nor the mapped address (base) available in the kernel (typically
> 0xdc......).

Now that I've noticed the BCM2835_VCMMU_SHIFT removal, this makes sense,
but when you put unrelated changes like this together you end up slowing
down the review process on your patches.  Please separate it out into a
separate commit.

Attachment: signature.asc
Description: PGP signature

_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux