The patch drm/i915: increase the tries for HDMI hotplug live status checking has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 3d8acd1f667b45c531401c8f0c2033072e32a05d Mon Sep 17 00:00:00 2001 From: Gary Wang <gary.c.wang@xxxxxxxxx> Date: Wed, 23 Dec 2015 16:11:35 +0800 Subject: [PATCH] drm/i915: increase the tries for HDMI hotplug live status checking The total delay of HDMI hotplug detecting with 30ms is sometimes not enoughtfor HDMI live status up with specific HDMI monitors in BSW platform. After doing experiments for following monitors, it needs 80ms at least for those worst cases. Lenovo L246 1xwA (4 failed, necessary hot-plug delay: 58/40/60/40ms) Philips HH2AP (9 failed, necessary hot-plug delay: 80/50/50/60/46/40/58/58/39ms) BENQ ET-0035-N (6 failed, necessary hot-plug delay: 60/50/50/80/80/40ms) DELL U2713HM (2 failed, necessary hot-plug delay: 58/59ms) HP HP-LP2475w (5 failed, necessary hot-plug delay: 70/50/40/60/40ms) It looks like 70-80 ms is BSW platform needs in some bad cases of the monitors at this end (8 times delay at most). Keep less than 100ms for HDCP pulse HPD low (with at least 100ms) to respond a plug out. Reviewed-by: Cooper Chiou <cooper.chiou@xxxxxxxxx> Tested-by: Gary Wang <gary.c.wang@xxxxxxxxx> Cc: Gavin Hindman <gavin.hindman@xxxxxxxxx> Cc: Sonika Jindal <sonika.jindal@xxxxxxxxx> Cc: Shashank Sharma <shashank.sharma@xxxxxxxxx> Cc: Shobhit Kumar <shobhit.kumar@xxxxxxxxx> Signed-off-by: Gary Wang <gary.c.wang@xxxxxxxxx> Link: http://patchwork.freedesktop.org/patch/msgid/1450858295-12804-1-git-send-email-gary.c.wang@xxxxxxxxx Tested-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx> Cc: drm-intel-fixes@xxxxxxxxxxxxxxxxxxxxx Fixes: 237ed86c693d ("drm/i915: Check live status before reading edid") Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx> (cherry picked from commit f8d03ea0053b23de42c828d559016eabe0b91523) [Jani: undo the file mode change of the original commit] Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx> --- drivers/gpu/drm/i915/intel_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 64086f2d4e26..e6c035b0fc1c 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1381,7 +1381,7 @@ intel_hdmi_detect(struct drm_connector *connector, bool force) intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS); - for (try = 0; !live_status && try < 4; try++) { + for (try = 0; !live_status && try < 9; try++) { if (try) msleep(10); live_status = intel_digital_port_connected(dev_priv, -- 2.6.2 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
