> -----Original Message----- > From: Caesar Wang [mailto:wxt@xxxxxxxxxxxxxx] > Sent: Monday, December 21, 2015 10:56 PM > To: broonie@xxxxxxxxxx; robh+dt@xxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; > alsa-devel@xxxxxxxxxxxxxxxx; Bard Liao; heiko@xxxxxxxxx; Caesar Wang > Subject: [PATCH v1 2/2] dt-bindings: sound: add devicetree document for > rt5616 > > Add the description for rt5616 codec. > > Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx> > > --- > > Changes in v1: > - As Heiko comments, remove the not exist option properties. > > Documentation/devicetree/bindings/sound/rt5616.txt | 36 > ++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/sound/rt5616.txt > > diff --git a/Documentation/devicetree/bindings/sound/rt5616.txt > b/Documentation/devicetree/bindings/sound/rt5616.txt > new file mode 100644 > index 0000000..2030a22 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/rt5616.txt > @@ -0,0 +1,36 @@ > +RT5616 audio CODEC > + > +This device supports I2C only. > + > +Required properties: > + > +- compatible : "realtek,rt5616". > + > +- reg : The I2C address of the device. > + > +Pins on the device (for linking into audio routes) for RT5616: > + > + * IN1P > + * IN2P > + * IN2N > + * LOUTL > + * LOUTR These names below seems not defined in rt5616_dapm_widgets. Where are they from? > + * CPN2 > + * CPP2 > + * CPN1 > + * CPP1 > + * HPO_R > + * HPO_L > + * ADCDAT1 > + * DACDAT1 > + * LRCK1 > + * BCLK1 > + * MCLK > + * GPIO1 > + > +Example: > + > +rt5616 { > + compatible = "realtek,rt5616"; > + reg = <0x1b>; > +}; > -- > 1.9.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
