From: Maruthi Srinivas Bayyavarapu <Maruthi.Bayyavarapu@xxxxxxx>
When DW controller is in master mode, it can disable/enable clock
during the device runtime suspend/resume sequence.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@xxxxxxx>
Reviewed-by: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
sound/soc/dwc/designware_i2s.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index 6e6a70c..3d7754c 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -18,6 +18,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/pm_runtime.h>
#include <sound/designware_i2s.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -394,6 +395,23 @@ static const struct snd_soc_component_driver dw_i2s_component = {
};
#ifdef CONFIG_PM
+static int dw_i2s_runtime_suspend(struct device *dev)
+{
+ struct dw_i2s_dev *dw_dev = dev_get_drvdata(dev);
+
+ if (dw_dev->capability & DW_I2S_MASTER)
+ clk_disable(dw_dev->clk);
+ return 0;
+}
+
+static int dw_i2s_runtime_resume(struct device *dev)
+{
+ struct dw_i2s_dev *dw_dev = dev_get_drvdata(dev);
+
+ if (dw_dev->capability & DW_I2S_MASTER)
+ clk_enable(dw_dev->clk);
+ return 0;
+}
static int dw_i2s_suspend(struct snd_soc_dai *dai)
{
@@ -649,7 +667,7 @@ static int dw_i2s_probe(struct platform_device *pdev)
goto err_clk_disable;
}
}
-
+ pm_runtime_enable(&pdev->dev);
return 0;
err_clk_disable:
@@ -665,6 +683,7 @@ static int dw_i2s_remove(struct platform_device *pdev)
if (dev->capability & DW_I2S_MASTER)
clk_disable_unprepare(dev->clk);
+ pm_runtime_disable(&pdev->dev);
return 0;
}
@@ -677,12 +696,17 @@ static const struct of_device_id dw_i2s_of_match[] = {
MODULE_DEVICE_TABLE(of, dw_i2s_of_match);
#endif
+static const struct dev_pm_ops dwc_pm_ops = {
+ SET_RUNTIME_PM_OPS(dw_i2s_runtime_suspend, dw_i2s_runtime_resume, NULL)
+};
+
static struct platform_driver dw_i2s_driver = {
.probe = dw_i2s_probe,
.remove = dw_i2s_remove,
.driver = {
.name = "designware-i2s",
.of_match_table = of_match_ptr(dw_i2s_of_match),
+ .pm = &dwc_pm_ops,
},
};
--
1.8.3.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
