[PATCH] ALSA: hda - Enable power_save_node for CX20722

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I've tested it on one device and it works fine, no clicks.

Signed-off-by: David Henningsson <david.henningsson@xxxxxxxxxxxxx>
---

Alsa-info for this device is available here: https://launchpadlibrarian.net/228090406/AlsaInfo.txt

Possibly it works well for other chips too, but this is the only one
I have tested.

Btw; I noticed another thing which I wonder whether it's correct or not:
If I run "hda-emu AlsaInfo.txt", all nodes are in D3. But after running "P 0 p",
some nodes (e g the internal speaker pin) stays in D0. Is that expected?
I thought all pins would go down to D3 when playback closes.
Same behaviour is seen on the real hardware, too.

 sound/pci/hda/patch_conexant.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index ef19890..6122b8c 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -901,6 +901,9 @@ static int patch_conexant_auto(struct hda_codec *codec)
 		snd_hda_pick_fixup(codec, cxt5051_fixup_models,
 				   cxt5051_fixups, cxt_fixups);
 		break;
+	case 0x14f150f2:
+		codec->power_save_node = 1;
+		/* Fall through */
 	default:
 		codec->pin_amp_workaround = 1;
 		snd_hda_pick_fixup(codec, cxt5066_fixup_models,
-- 
1.9.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux