Basically in this tablet the rt5640 realtek audio codec is identified with
INTCCFFD. I don't know how to share 'byt-rt5640.c' with two identifiers
because I had to change:
@@ -186,7 +194,7 @@
.stream_name = "Audio",
.cpu_dai_name = "baytrail-pcm-audio",
.codec_dai_name = "rt5640-aif1",
- .codec_name = "i2c-10EC5640:00",
+ .codec_name = "i2c-INTCCFFD:00",
.platform_name = "baytrail-pcm-audio",
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
but the correct will be to two both of them.
Regards
________________________________________
From: alsa-devel-bounces@xxxxxxxxxxxxxxxx [alsa-devel-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Jorge Fernandez Monteagudo [jorgefm@xxxxxxxxx]
Sent: Friday, November 20, 2015 4:27 PM
To: alsa-devel@xxxxxxxxxxxxxxxx
Subject: Intel SST and HP ElitePad 1000 G2
Hi,
This is my first email in this list, and my last chance to make my tablet
audio system work
I'm trying to get my tablet audio system working but I'm run out of ideas.
The HP ElitePad 1000 G2 it's an Atom Z3795 1.60GHz Bay Trail-T tablet.
I'm using a kernel 4.2.5 with all the SST configs enabled:
CONFIG_SND_SST_MFLD_PLATFORM=m
CONFIG_SND_SST_IPC=m
CONFIG_SND_SST_IPC_ACPI=m
CONFIG_SND_SOC_INTEL_SST=m
CONFIG_SND_SOC_INTEL_SST_ACPI=m
CONFIG_SND_SOC_INTEL_HASWELL=m
CONFIG_SND_SOC_INTEL_BAYTRAIL=m
CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH=m
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
# CONFIG_SND_SOC_QCOM is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
I've follow the same steps as the installation for Asus T100TA
https://wiki.debian.org/InstallingDebianOn/Asus/T100TA
and finally I only get the dmesg traces:
sst-acpi 80860F28:00: No matching ASoC machine driver found
intel-sst-acpi 80860F28:00: No matching machine driver found
From the 'dsdt.dsl' I can see:
Device (I2C2)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "80860F41" /* Intel Baytrail I2C Host Controller */) // _HID: Hardware ID
Name (_CID, "80860F41" /* Intel Baytrail I2C Host Controller */) // _CID: Compatible ID
Name (_DEP, Package (0x01) // _DEP: Dependencies
{
PEPD
})
Name (_DDN, "Intel(R) I2C Controller #2 - 80860F42") // _DDN: DOS Device Name
Name (_UID, 0x02) // _UID: Unique ID
Name (RBUF, ResourceTemplate ()
{
Memory32Fixed (ReadWrite,
0x00000000, // Address Base
0x00001000, // Address Length
_Y12)
Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, ,, )
{
0x00000021,
}
FixedDMA (0x0012, 0x0002, Width32bit, )
FixedDMA (0x0013, 0x0003, Width32bit, )
})
Method (_HRV, 0, NotSerialized) // _HRV: Hardware Revision
{
Return (SOCS) /* \SOCS */
}
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
CreateDWordField (RBUF, \_SB.I2C2._Y12._BAS, B0BA) // _BAS: Base Address
CreateDWordField (RBUF, \_SB.I2C2._Y12._LEN, B0LN) // _LEN: Length
Store (I20A, B0BA) /* \_SB_.I2C2._CRS.B0BA */
Store (I20L, B0LN) /* \_SB_.I2C2._CRS.B0LN */
Return (RBUF) /* \_SB_.I2C2.RBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
If (LOr (LEqual (I20A, Zero), LEqual (L22D, One)))
{
Return (Zero)
}
Return (0x0F)
}
Method (_PS3, 0, NotSerialized) // _PS3: Power State 3
{
Or (PSAT, 0x03, PSAT) /* \_SB_.I2C2.PSAT */
Or (PSAT, Zero, PSAT) /* \_SB_.I2C2.PSAT */
}
Method (_PS0, 0, NotSerialized) // _PS0: Power State 0
{
And (PSAT, 0xFFFFFFFC, PSAT) /* \_SB_.I2C2.PSAT */
Or (PSAT, Zero, PSAT) /* \_SB_.I2C2.PSAT */
}
OperationRegion (KEYS, SystemMemory, I21A, 0x0100)
Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
{
Offset (0x84),
PSAT, 32
}
Device (RTEK)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "INTCCFFD") // _HID: Hardware ID
Name (_CID, "INTCCFFD") // _CID: Compatible ID
Name (_DDN, "RTEK Codec Controller ") // _DDN: DOS Device Name
Name (_UID, 0x02) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
I2cSerialBus (0x001C, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2C2",
0x00, ResourceConsumer, ,
)
GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x000E
}
GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x0000,
"\\_SB.GPO0", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0003
}
GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x0000,
"\\_SB.GPO0", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0000
}
GpioIo (Shared, PullDefault, 0x0000, 0x0000, IoRestrictionInputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x000E
}
GpioIo (Shared, PullDefault, 0x0000, 0x0000, IoRestrictionInputOnly,
"\\_SB.GPO0", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0003,
0x0000
}
})
Return (SBUF) /* \_SB_.I2C2.RTEK._CRS.SBUF */
}
What am I missing? I suppose I need some changes in the kernel sources but I don't know
where to start. Any help is welcome
Regards,
Jorge
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o CONFIDENCIAL. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción.
This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by professional privilege.
If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
