From: Jeeja KP <jeeja.kp@xxxxxxxxx> For DAPM resume, we should first change the power state of the card and then recheck the endpoints. This ensures the dapm is resumed first and then userspace can resume the streams. Signed-off-by: Jeeja KP <jeeja.kp@xxxxxxxxx> Signed-off-by: Vinod Koul <vinod.koul@xxxxxxxxx> --- sound/soc/soc-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 0a26ac0fb513..6dd704a6b76f 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -846,12 +846,12 @@ static void soc_resume_deferred(struct work_struct *work) dev_dbg(card->dev, "ASoC: resume work completed\n"); - /* userspace can access us now we are back as we were before */ - snd_power_change_state(card->snd_card, SNDRV_CTL_POWER_D0); - /* Recheck all endpoints too, their state is affected by suspend */ dapm_mark_endpoints_dirty(card); snd_soc_dapm_sync(&card->dapm); + + /* userspace can access us now we are back as we were before */ + snd_power_change_state(card->snd_card, SNDRV_CTL_POWER_D0); } /* powers up audio subsystem after a suspend */ -- 1.9.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
