On 11/16/2015 05:51 AM, Kuninori Morimoto wrote: > From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> > > ak4613 IN/OUT pin can be selected as differential/single-end. > Default is differential, because it is register default settings. > > Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> > --- > v1 -> v2 > > - add vender prefix > > Documentation/devicetree/bindings/sound/ak4613.txt | 10 ++++++++ > sound/soc/codecs/ak4613.c | 29 ++++++++++++++++++++++ > 2 files changed, 39 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/ak4613.txt b/Documentation/devicetree/bindings/sound/ak4613.txt > index 15a9195..3cf63e7 100644 > --- a/Documentation/devicetree/bindings/sound/ak4613.txt > +++ b/Documentation/devicetree/bindings/sound/ak4613.txt > @@ -7,6 +7,16 @@ Required properties: > - compatible : "asahi-kasei,ak4613" > - reg : The chip select number on the I2C bus > > +Optional properties: > +- ak4613,in1-single-end : Boolean. Indicate input / output pins are single-ended. > +- ak4613,in2-single-end rather than differential. > +- ak4613,out1-single-end > +- ak4613,out2-single-end > +- ak4613,out3-single-end > +- ak4613,out4-single-end > +- ak4613,out5-single-end > +- ak4613,out6-single-end The vendor prefix is usually the same as for the compatible string, rather than the part name. E.g. in this case asahi-kasei. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
