On 11/13/2015 06:12 AM, Kuninori Morimoto wrote: > From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> > > ak4613 IN/OUT pin can be selected as differential/single-end. > Differential is default, because it is register default settings. > > Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> > --- > Documentation/devicetree/bindings/sound/ak4613.txt | 10 ++++++++ > sound/soc/codecs/ak4613.c | 29 ++++++++++++++++++++++ > 2 files changed, 39 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/ak4613.txt b/Documentation/devicetree/bindings/sound/ak4613.txt > index 15a9195..392b5b5 100644 > --- a/Documentation/devicetree/bindings/sound/ak4613.txt > +++ b/Documentation/devicetree/bindings/sound/ak4613.txt > @@ -7,6 +7,16 @@ Required properties: > - compatible : "asahi-kasei,ak4613" > - reg : The chip select number on the I2C bus > > +Optional properties: > +- in1-single-end : Boolean. Indicate input / output pins are single-ended. > +- in2-single-end rather than differential. > +- out1-single-end > +- out2-single-end > +- out3-single-end > +- out4-single-end > +- out5-single-end > +- out6-single-end vendor prefix? _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
