From: Jeeja KP <jeeja.kp@xxxxxxxxx> For HDA codecs WAKEENABLE bit is to programmed if codec event change has to wake the system when suspended. In skylake I2S systems which are currently supported we have only HDMI codec, which doesn't use this capability to detect a HDMI connect/ disconnect event. HDMI HDA codec uses display interface to detect connect/disconnect event. This patch removes the WAKEBIT enabling during device D0/D3 as this seems to cause spurious wakes on the system Signed-off-by: Jeeja KP <jeeja.kp@xxxxxxxxx> Signed-off-by: Vinod Koul <vinod.koul@xxxxxxxxx> --- sound/soc/intel/skylake/skl.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 390f839d6168..b771b74781ca 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -191,9 +191,6 @@ static int skl_runtime_suspend(struct device *dev) dev_dbg(bus->dev, "in %s\n", __func__); - /* enable controller wake up event */ - snd_hdac_chip_updatew(bus, WAKEEN, 0, STATESTS_INT_MASK); - return _skl_suspend(ebus); } @@ -203,17 +200,11 @@ static int skl_runtime_resume(struct device *dev) struct hdac_ext_bus *ebus = pci_get_drvdata(pci); struct hdac_bus *bus = ebus_to_hbus(ebus); struct skl *skl = ebus_to_skl(ebus); - int status; dev_dbg(bus->dev, "in %s\n", __func__); - /* Read STATESTS before controller reset */ - status = snd_hdac_chip_readw(bus, STATESTS); - skl_init_pci(skl); snd_hdac_bus_init_chip(bus, true); - /* disable controller Wake Up event */ - snd_hdac_chip_updatew(bus, WAKEEN, STATESTS_INT_MASK, 0); return _skl_resume(ebus); } -- 1.9.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
