On Wed, Nov 04, 2015 at 07:09:14PM +0100, Roberto Fichera wrote: > I can try to increase the FIFO watermark up to 15 elements, but after that > I don't have more choices. The problem is that the TDM has to run continuously > because the SLIC need it. I can eventually enable and disable the DMA requests > depending by the active channels for optimization, but the problem still,why the > DMA transfer is not triggered? There's nothing you can do from SSI side. If you don't clear the Channel Error bit, the channel might be still hanging there until you clear the bit or reset the channel. You may read SDMA chapter for details. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
