From: "Damien.Horsley" <Damien.Horsley@xxxxxxxxxx>
Add binding document for Imagination Technologies SPDIF
ouput controller
Signed-off-by: Damien.Horsley <Damien.Horsley@xxxxxxxxxx>
---
.../devicetree/bindings/sound/img,spdif-out.txt | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/img,spdif-out.txt
diff --git a/Documentation/devicetree/bindings/sound/img,spdif-out.txt b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
new file mode 100644
index 0000000..470a519
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
@@ -0,0 +1,44 @@
+Imagination Technologies SPDIF Output Controller
+
+Required Properties:
+
+ - compatible : Compatible list, must contain "img,spdif-out"
+
+ - #sound-dai-cells : Must be equal to 0
+
+ - reg : Offset and length of the register set for the device
+
+ - dmas: Contains an entry for each entry in dma-names.
+
+ - dma-names: Must include the following entry:
+ "tx"
+
+ - clocks : Contains an entry for each entry in clock-names.
+
+ - clock-names : Includes the following entries:
+ "sys" The system clock
+ "ref" The reference clock
+
+ - resets: Contains a phandle to the spdif out reset signal
+
+ - reset-names: Contains the reset signal name "rst"
+
+Optional Properties:
+
+ - interrupts : Contains the parallel out interrupt, if present
+
+Example:
+
+spdif_out: spdif-out@18100D00 {
+ compatible = "img,spdif-out";
+ reg = <0x18100D00 0x100>;
+ interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 14 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_SPDIF_OUT>,
+ <&clk_core CLK_SPDIF>;
+ clock-names = "sys", "ref";
+ resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+};
--
2.1.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
