On Sat, Oct 24, 2015 at 11:37:07PM +0200, Robert Jarzmik wrote:
> Convert the Wolfson WM9713 to regmap API. This will leverage all the
> regmap functions (debug, registers update, etc ...).
>
> As a bonus, this will pave the path to gpio chip introduction, and
> devicetree support.
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
> ---
> Since v1: fix suspend/resume (that specific part is not tested yet)
> ---
> sound/soc/codecs/Kconfig | 1 +
> sound/soc/codecs/wm9713.c | 296 +++++++++++++++++++++++-----------------------
> 2 files changed, 152 insertions(+), 145 deletions(-)
<snip>
> @@ -1156,16 +1165,17 @@ static int wm9713_set_bias_level(struct snd_soc_codec *codec,
>
> static int wm9713_soc_suspend(struct snd_soc_codec *codec)
> {
> - u16 reg;
> + regcache_cache_only(codec->component.regmap, true);
> + snd_soc_cache_sync(codec);
I am assuming we don't want to be doing a cache_sync just after we
have marked the regmap as cache only.
>
> /* Disable everything except touchpanel - that will be handled
> * by the touch driver and left disabled if touch is not in
> * use. */
> - reg = ac97_read(codec, AC97_EXTENDED_MID);
> - ac97_write(codec, AC97_EXTENDED_MID, reg | 0x7fff);
> - ac97_write(codec, AC97_EXTENDED_MSTATUS, 0xffff);
> - ac97_write(codec, AC97_POWERDOWN, 0x6f00);
> - ac97_write(codec, AC97_POWERDOWN, 0xffff);
> + snd_soc_update_bits(codec, AC97_EXTENDED_MID, 0x7fff,
> + 0x7fff);
> + snd_soc_write(codec, AC97_EXTENDED_MSTATUS, 0xffff);
> + snd_soc_write(codec, AC97_POWERDOWN, 0x6f00);
> + snd_soc_write(codec, AC97_POWERDOWN, 0xffff);
Also as you have already marked the regmap as cache only these
writes won't go to the hardware.
Thanks,
Charles
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
