On Tue, Oct 20, 2015 at 11:47:12AM +0900, Jiada Wang wrote:
> As ALC2 register is volatile, declare it as one of ALC Coefficients
> register together with other non-volatile registers will cause issue,
> in case wm8962 has enter suspend mode, and cache_only flag is set,
> any attempt to read from ALC2 will fail.
>
> Instead of declaring one ALC Coefficients register which contains
> ALC1 ~ ALC3 and Noise Gate, this patch declares 4 separate registers,
> so that regmap can handle these registers differently based on their
> classification.
>
> Signed-off-by: Jiada Wang <jiada_wang@xxxxxxxxxx>
> ---
> sound/soc/codecs/wm8962.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
> index a3d7778..157530c 100644
> --- a/sound/soc/codecs/wm8962.c
> +++ b/sound/soc/codecs/wm8962.c
> @@ -1782,8 +1782,11 @@ SND_SOC_BYTES("HD Bass Coefficients", WM8962_HDBASS_AI_1, 30),
>
> SOC_DOUBLE("ALC Switch", WM8962_ALC1, WM8962_ALCL_ENA_SHIFT,
> WM8962_ALCR_ENA_SHIFT, 1, 0),
> -SND_SOC_BYTES_MASK("ALC Coefficients", WM8962_ALC1, 4,
> +SND_SOC_BYTES_MASK("ALC1", WM8962_ALC1, 1,
> WM8962_ALCL_ENA_MASK | WM8962_ALCR_ENA_MASK),
> +SND_SOC_BYTES("ALC2", WM8962_ALC2, 1),
> +SND_SOC_BYTES("ALC3", WM8962_ALC3, 1),
> +SND_SOC_BYTES("Noise Gate", WM8962_NOISE_GATE, 1),
This doesn't really seem ideal to be changing the interface at
this point in the drivers life.
Looking through the datasheet/driver there are 5 status bits in
the ALC2 register but we don't use them anywhere in the driver
and they don't look like they are likely to be useful to the end
user. I wonder if an easier solution might just be to have the
register be non-volatile?
Thanks,
Charles
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
