The patch ASoC: nau8825: Show device properties has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 218d2ce2036f50d259dbcdd37a4db72cad6fc0d1 Mon Sep 17 00:00:00 2001 From: Ben Zhang <benzh@xxxxxxxxxxxx> Date: Mon, 19 Oct 2015 16:49:06 -0700 Subject: [PATCH] ASoC: nau8825: Show device properties The codec device properties are printed for debugging. Signed-off-by: Ben Zhang <benzh@xxxxxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- sound/soc/codecs/nau8825.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index bd58b96..7fc7b4e 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1100,6 +1100,34 @@ static void nau8825_reset_chip(struct regmap *regmap) regmap_write(regmap, NAU8825_REG_RESET, 0x00); } +static void nau8825_print_device_properties(struct nau8825 *nau8825) +{ + int i; + struct device *dev = nau8825->dev; + + dev_dbg(dev, "jkdet-enable: %d\n", nau8825->jkdet_enable); + dev_dbg(dev, "jkdet-pull-enable: %d\n", nau8825->jkdet_pull_enable); + dev_dbg(dev, "jkdet-pull-up: %d\n", nau8825->jkdet_pull_up); + dev_dbg(dev, "jkdet-polarity: %d\n", nau8825->jkdet_polarity); + dev_dbg(dev, "micbias-voltage: %d\n", nau8825->micbias_voltage); + dev_dbg(dev, "vref-impedance: %d\n", nau8825->vref_impedance); + + dev_dbg(dev, "sar-threshold-num: %d\n", nau8825->sar_threshold_num); + for (i = 0; i < nau8825->sar_threshold_num; i++) + dev_dbg(dev, "sar-threshold[%d]=%d\n", i, + nau8825->sar_threshold[i]); + + dev_dbg(dev, "sar-hysteresis: %d\n", nau8825->sar_hysteresis); + dev_dbg(dev, "sar-voltage: %d\n", nau8825->sar_voltage); + dev_dbg(dev, "sar-compare-time: %d\n", nau8825->sar_compare_time); + dev_dbg(dev, "sar-sampling-time: %d\n", nau8825->sar_sampling_time); + dev_dbg(dev, "short-key-debounce: %d\n", nau8825->key_debounce); + dev_dbg(dev, "jack-insert-debounce: %d\n", + nau8825->jack_insert_debounce); + dev_dbg(dev, "jack-eject-debounce: %d\n", + nau8825->jack_eject_debounce); +} + static int nau8825_read_device_properties(struct device *dev, struct nau8825 *nau8825) { @@ -1213,6 +1241,8 @@ static int nau8825_i2c_probe(struct i2c_client *i2c, nau8825->dev = dev; nau8825->irq = i2c->irq; + nau8825_print_device_properties(nau8825); + nau8825_reset_chip(nau8825->regmap); ret = regmap_read(nau8825->regmap, NAU8825_REG_I2C_DEVICE_ID, &value); if (ret < 0) { -- 2.6.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel