Update some of the default configuration for the device to improve the performance. Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx> --- include/linux/mfd/wm8994/registers.h | 9 ++++++++ sound/soc/codecs/wm8994.c | 35 +++++++++++++++++++++++++-------- 2 files changed, 35 insertions(+), 9 deletions(-) diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h index a610c87..4d5a561 100644 --- a/include/linux/mfd/wm8994/registers.h +++ b/include/linux/mfd/wm8994/registers.h @@ -64,6 +64,7 @@ #define WM8994_LDO_1 0x3B #define WM8994_LDO_2 0x3C #define WM8994_CHARGE_PUMP_1 0x4C +#define WM8958_CHARGE_PUMP_2 0x4D #define WM8994_CLASS_W_1 0x51 #define WM8994_DC_SERVO_1 0x54 #define WM8994_DC_SERVO_2 0x55 @@ -1858,6 +1859,14 @@ #define WM8994_CP_ENA_WIDTH 1 /* CP_ENA */ /* + * R77 (0x4D) - Charge Pump (2) + */ +#define WM8958_CP_DISCH 0x8000 /* CP_DISCH */ +#define WM8958_CP_DISCH_MASK 0x8000 /* CP_DISCH */ +#define WM8958_CP_DISCH_SHIFT 15 /* CP_DISCH */ +#define WM8958_CP_DISCH_WIDTH 1 /* CP_DISCH */ + +/* * R81 (0x51) - Class W (1) */ #define WM8994_CP_DYN_SRC_SEL_MASK 0x0300 /* CP_DYN_SRC_SEL - [9:8] */ diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index bfd4cf4..b4c3cca 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1806,15 +1806,32 @@ static int wm8994_set_bias_level(struct snd_soc_codec *codec, if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { pm_runtime_get_sync(codec->dev); - /* Tweak DC servo and DSP configuration for - * improved performance. */ - if (control->type == WM8994 && wm8994->revision < 4) { - /* Tweak DC servo and DSP configuration for - * improved performance. */ - snd_soc_write(codec, 0x102, 0x3); - snd_soc_write(codec, 0x56, 0x3); - snd_soc_write(codec, 0x817, 0); - snd_soc_write(codec, 0x102, 0); + switch (control->type) { + case WM8994: + if (wm8994->revision < 4) { + /* Tweak DC servo and DSP + * configuration for improved + * performance. */ + snd_soc_write(codec, 0x102, 0x3); + snd_soc_write(codec, 0x56, 0x3); + snd_soc_write(codec, 0x817, 0); + snd_soc_write(codec, 0x102, 0); + } + break; + + case WM8958: + if (wm8994->revision == 0) { + /* Optimise performance for rev A */ + snd_soc_write(codec, 0x102, 0x3); + snd_soc_write(codec, 0xcb, 0x81); + snd_soc_write(codec, 0x817, 0); + snd_soc_write(codec, 0x102, 0); + + snd_soc_update_bits(codec, + WM8958_CHARGE_PUMP_2, + WM8958_CP_DISCH, + WM8958_CP_DISCH); + } } /* Discharge LINEOUT1 & 2 */ -- 1.7.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel