Devices which do not have a DCS correction applied can use the explicit
DC servo startup mode for optimal startup performance. This most
immediately affects the WM8958.
Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
sound/soc/codecs/wm_hubs.c | 20 ++++++++++++++------
1 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index e7a19d6..b24ba9f 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -105,12 +105,20 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec)
return;
}
- /* Set for 32 series updates */
- snd_soc_update_bits(codec, WM8993_DC_SERVO_1,
- WM8993_DCS_SERIES_NO_01_MASK,
- 32 << WM8993_DCS_SERIES_NO_01_SHIFT);
- wait_for_dc_servo(codec,
- WM8993_DCS_TRIG_SERIES_0 | WM8993_DCS_TRIG_SERIES_1);
+ /* Devices not using a DCS code correction have startup mode */
+ if (hubs->dcs_codes) {
+ /* Set for 32 series updates */
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_1,
+ WM8993_DCS_SERIES_NO_01_MASK,
+ 32 << WM8993_DCS_SERIES_NO_01_SHIFT);
+ wait_for_dc_servo(codec,
+ WM8993_DCS_TRIG_SERIES_0 |
+ WM8993_DCS_TRIG_SERIES_1);
+ } else {
+ wait_for_dc_servo(codec,
+ WM8993_DCS_TRIG_STARTUP_0 |
+ WM8993_DCS_TRIG_STARTUP_1);
+ }
/* Different chips in the family support different readback
* methods.
--
1.7.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
