Hello, I am using Ubuntu 10.10 with a Creative Sound Blaster Audigy SE. The snd_ca0106 module is loaded. I have a Y-connector plugged in the green front left/right jack so that I can listen at the sound through speakers and the headphones at the same time. The microphone is plugged into the blue jack, consistent with the sound card specs: http://pdfguides.com/creative-labs-sound-blaster-audigy-se-features-specifications.html I go the sound working after getting a tip that both the digital and analog mixer might be turned on. After turning the digital control off, sound started to work. However, mic still isn't working in Linux, although it works just fine in Win 7. There are 7 input mixers available in alsamixer: -Line-in: set at 81/81 volume -Mic: 100/100 -Phone 81/81 -Aux: 0/0 -Analog Source: set to Mic (no VU meter) -Digital Source: set to AC97 in (cannot seem to be muted) -Shared Mic/Line in set to Line in If I set both Analog Source and Shared Mic/Line in to Mic, I get screeching sounds from speakers and headphones. If I set one of them to Line in and one to Mic no sound is played back after I record some sound. Can anyone help? Thanks, -- Grega Fajdiga Hacquetova 5 1113 Ljubljana GSM: +386 40 923 635 E-poÅta: Gregor.Fajdiga@xxxxxxxxxxxxxx _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
