I had faced the similar issue on IMx31. The cause there was reversal of LRCK clock {180 degree phase shift}.
probing the LRCK clock may help you to find the problem
________________________________________
From: alsa-devel-bounces@xxxxxxxxxxxxxxxx [alsa-devel-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Patrick Ziegler [patrick.ziegler@xxxxxxxx]
Sent: Friday, November 12, 2010 1:36 PM
To: alsa-devel@xxxxxxxxxxxxxxxx
Cc: Ryan Mallon
Subject: Re: Channel swapping problem on Atmel SSC audio
Am 11.11.2010 13:27, schrieb Alan Horstmann:
> On Wednesday 10 November 2010 22:49, Ryan Mallon wrote:
>
>> I'm working on a custom board using the AT91SAM9G45 processor and a
>> TLV320AIC26 SPI attached audio codec using I2S format audio. When doing
>> audio playback on the board the left and right channels are occasionally
>> flipped.
>>
> <snip>
>
>
>> Has anybody else had this problem, or does anybody have any AT91/Atmel
>> hardware that they could test to see if it occurs on other hardware also?
>>
> I have worked with the AT91SAM9260 on a project which is currently suspended
> (other priorities), where we had a simiar problem, with a codec on SPI.
> Every time audio was started (capture or playback) the channels could be
> swapped. Solving that issue remains TODO when we restart.
>
> There was a thread on alsa-devel last month 'Soc Atmel SSC stereo problem'
> with some suggestions.
>
>
In the thread mentioned, Alan proposed me amongst other things to test
the LRCK level before starting the SSC. This works well for me. Maybe it
should be implemented in a more generic way but the following
modification does the trick for me.
in function atmel_pcm_trigger inside file sound/soc/atmel/atmel-pcm.c :
case SNDRV_PCM_TRIGGER_START:
+while(!at91_get_gpio_value(AT91_PIN_PB12));
+while(at91_get_gpio_value(AT91_PIN_PB12));
case SNDRV_PCM_TRIGGER_RESUME:
+while(!at91_get_gpio_value(AT91_PIN_PB12));
+while(at91_get_gpio_value(AT91_PIN_PB12));
Patrick
--
Dipl.-Inf. (FH) Patrick Ziegler
University Of Applied Sciences
Kaiserslautern
Amerikastrasse 1
D-66482 Zweibruecken
Germany
Phone: +49 631 3724 5526
Mail: patrick.ziegler@xxxxxxxx
http://www.fh-kl.de
http://www.fh-kl.de/fachbereiche/imst/iuk-knowhow.html
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email.
Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
