Hi, I have some trouble with stereo audio through the atmal ssc interface based on at91-ssc.c. Unfortunately left and right channels were swapped periodically. In my environment the codec supplies the BLCK and LRC clocks and the SSC is configured to transmit one sample on both edges of the LRC clock. But I guess the audio frames will always start with a frame of the left channel while the LRC clock is in an undefined state. How does normally the audio driver detect when a left and when a right channel frame should be send and with which it should start ? Thanks in advance for your help. Regards, Patrick -- Dipl.-Inf. (FH) Patrick Ziegler University Of Applied Sciences Kaiserslautern Amerikastrasse 1 D-66482 Zweibruecken Germany Phone: +49 631 3724 5526 Mail: patrick.ziegler@xxxxxxxx http://www.fh-kl.de http://www.fh-kl.de/fachbereiche/imst/iuk-knowhow.html _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
