On 10/08/2010 10:46 AM, Timur Tabi wrote: > Ryan Mallon wrote: >> + * For setups with variable MCLKs, pass 0 as 'freq' argument. This will cause >> + * theoretically possible sample rates to be enabled. Call it again with a >> + * proper value set one the external clock is set (most probably you would do >> + * that from a machine's driver 'hw_param' hook. > > If you're going to copy/paste parts of my driver verbatim into yours, you should > put something like this in the comments: > > Based on the CS4270 driver by Timur Tabi <timur@xxxxxxxxxxxxx> > Thanks. CC'ed Alexander, the driver author, who I stupidly left of the reply list. ~Ryan -- Bluewater Systems Ltd - ARM Technology Solution Centre Ryan Mallon 5 Amuri Park, 404 Barbadoes St ryan@xxxxxxxxxxxxxxxx PO Box 13 889, Christchurch 8013 http://www.bluewatersys.com New Zealand Phone: +64 3 3779127 Freecall: Australia 1800 148 751 Fax: +64 3 3779135 USA 1800 261 2934 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
