Felix Homann wrote: > Am 05.10.2010 09:21, schrieb Clemens Ladisch: >> Felix Homann wrote: >>> Trying to log the value of f reveals that retire_playback_sync_urb() >>> doesn't seem to be called at all. >> >> The entire function or that part of the code? > > The entire function. I had placed a printk at the very beginning of > retire_playback_sync_urb() whose output doesn't show up. > >> Anyway, please try the patch below, which makes the driver >> autodetect the feedback format. (The actual format can be >> seen in /proc/asound/cardX/stream0 while running.) > > Playback: > Status: Running > Interface = 1 > Altset = 1 > URBs = 3 [ 57 57 57 ] > Packet Size = 312 > Momentary freq = 48000 Hz (0x6.0000) > Interface 1 > Altset 1 > Format: S24_3LE > Channels: 8 > Endpoint: 1 OUT (ADAPTIVE) > Rates: 44100, 48000, 88200, 96000 > Data packet interval: 125 us > > Does it tell us anything? That this device does not use frequency feedback. What happens when you are recording something and then try to play something else with a different sample rate? (use arecord/aplay with "-D hw:X") Regards, Clemens _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
