o.k... I'll make the changes to the arch patch, and combine the two, and send it to jiri.. as for the names and signed offs is what is below fine or do I need to change some of them? > > Looks good to me. > > Finn > > > On Mon, 27 Sep 2010, Justin P. Mattock wrote: > >> Below is an updated patch to fix broken web addresses in the kernel. >> Please let me know if I missed anything, and I'll go back and fix it. >> and lastly Thanks for all the help with this... >> >> Signed-off-by: Justin P. Mattock<justinmattock@xxxxxxxxx> >> Cc: Maciej W. Rozycki<macro@xxxxxxxxxxxxxx> >> Cc: Geert Uytterhoeven<geert@xxxxxxxxxxxxxx> >> Cc: Finn Thain<fthain@xxxxxxxxxxxxxxxxxxx> >> Cc: Randy Dunlap<rdunlap@xxxxxxxxxxxx> >> Cc: Matt Turner<mattst88@xxxxxxxxx> >> Cc: Dimitry Torokhov<dmitry.torokhov@xxxxxxxxx> >> Cc: Mike Frysinger<vapier.adi@xxxxxxxxx> >> Acked-by: Ben Pfaff<blp@xxxxxxxxxxxxxxx> >> Acked-by: Hans J. Koch<hjk@xxxxxxxxxxxxx> >> >> --- >> drivers/ata/pata_it821x.c | 4 ++-- >> drivers/atm/Kconfig | 2 +- >> drivers/char/agp/Kconfig | 2 +- >> drivers/char/agp/i460-agp.c | 2 +- >> drivers/char/apm-emulation.c | 4 ++-- >> drivers/char/ipmi/ipmi_bt_sm.c | 2 +- >> drivers/char/ipmi/ipmi_si_intf.c | 3 +-- >> drivers/char/n_r3964.c | 1 - >> drivers/char/pcmcia/Kconfig | 4 ++-- >> drivers/char/tpm/Kconfig | 2 +- >> drivers/char/tpm/tpm_infineon.c | 2 +- >> drivers/edac/edac_device_sysfs.c | 2 +- >> drivers/edac/i82443bxgx_edac.c | 2 +- >> drivers/firmware/Kconfig | 4 ++-- >> drivers/firmware/edd.c | 2 +- >> drivers/firmware/pcdp.h | 4 ++-- >> drivers/gpu/drm/drm_modes.c | 2 +- >> drivers/hwmon/adm1025.c | 2 +- >> drivers/hwmon/adm1026.c | 2 +- >> drivers/hwmon/f75375s.c | 4 ++-- >> drivers/hwmon/g760a.c | 2 +- >> drivers/hwmon/hwmon-vid.c | 2 +- >> drivers/ide/hpt366.c | 2 +- >> drivers/ide/ht6560b.c | 1 - >> drivers/infiniband/Kconfig | 4 ++-- >> drivers/infiniband/hw/cxgb3/Kconfig | 2 +- >> drivers/infiniband/hw/cxgb4/Kconfig | 2 +- >> drivers/infiniband/ulp/iser/Kconfig | 2 +- >> drivers/input/joystick/gamecon.c | 3 +-- >> drivers/input/misc/cm109.c | 2 +- >> drivers/input/mouse/Kconfig | 1 + >> drivers/input/mouse/touchkit_ps2.c | 4 ++-- >> drivers/input/touchscreen/mk712.c | 2 +- >> drivers/isdn/i4l/isdn_audio.c | 2 +- >> drivers/macintosh/therm_adt746x.c | 6 +++--- >> drivers/media/IR/keymaps/rc-manli.c | 1 - >> drivers/media/dvb/ttpci/av7110.c | 10 ++-------- >> drivers/media/dvb/ttpci/av7110_av.c | 2 +- >> drivers/media/dvb/ttpci/av7110_ca.c | 2 +- >> drivers/media/dvb/ttpci/av7110_hw.c | 2 +- >> drivers/media/dvb/ttpci/av7110_v4l.c | 2 +- >> drivers/media/dvb/ttpci/budget-av.c | 2 +- >> drivers/media/dvb/ttpci/budget-ci.c | 2 +- >> drivers/media/dvb/ttpci/budget-core.c | 2 +- >> drivers/media/dvb/ttpci/budget-patch.c | 2 +- >> drivers/media/dvb/ttpci/budget.c | 2 +- >> drivers/media/radio/radio-maxiradio.c | 2 +- >> drivers/media/radio/radio-typhoon.c | 2 -- >> drivers/media/video/Kconfig | 2 +- >> drivers/media/video/cafe_ccic.c | 2 +- >> drivers/media/video/cx18/cx18-cards.c | 2 +- >> drivers/media/video/cx23885/cx23885-417.c | 2 +- >> drivers/media/video/cx88/cx88-blackbird.c | 2 +- >> drivers/media/video/ivtv/ivtv-cards.c | 2 +- >> drivers/media/video/mxb.c | 2 +- >> drivers/media/video/sn9c102/sn9c102_pas202bcb.c | 1 - >> drivers/misc/Kconfig | 4 ++-- >> drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++-- >> drivers/mtd/devices/lart.c | 2 +- >> drivers/mtd/ftl.c | 2 +- >> drivers/mtd/maps/Kconfig | 4 ++-- >> drivers/mtd/nand/cafe_nand.c | 2 +- >> drivers/net/Kconfig | 21 ++++++++++----------- >> drivers/net/appletalk/Kconfig | 2 +- >> drivers/net/atp.c | 2 +- >> drivers/net/epic100.c | 4 ++-- >> drivers/net/hamradio/Kconfig | 2 +- >> drivers/net/ibmlana.c | 2 +- >> drivers/net/irda/donauboe.h | 2 +- >> drivers/net/pci-skeleton.c | 2 +- >> drivers/net/pcmcia/3c574_cs.c | 2 +- >> drivers/net/sc92031.c | 2 +- >> drivers/net/tlan.c | 2 +- >> drivers/net/tokenring/tms380tr.c | 2 +- >> drivers/net/tulip/Kconfig | 2 +- >> drivers/net/usb/plusb.c | 2 +- >> drivers/net/wan/Kconfig | 2 +- >> drivers/net/wireless/ath/ath5k/ath5k.h | 2 +- >> drivers/net/wireless/ath/ath5k/reg.h | 1 - >> drivers/net/wireless/p54/Kconfig | 6 +++--- >> drivers/net/wireless/prism54/islpci_hotplug.c | 2 +- >> drivers/parisc/README.dino | 3 +-- >> drivers/pci/quirks.c | 3 ++- >> drivers/pcmcia/yenta_socket.c | 2 +- >> drivers/pnp/pnpbios/proc.c | 1 - >> drivers/scsi/Kconfig | 9 +++++---- >> drivers/serial/8250.c | 2 +- >> drivers/serial/bfin_sport_uart.c | 2 +- >> drivers/serial/bfin_sport_uart.h | 2 +- >> drivers/serial/uartlite.c | 2 +- >> drivers/staging/asus_oled/README | 2 +- >> drivers/staging/asus_oled/asus_oled.c | 2 +- >> drivers/staging/comedi/drivers/cb_pcimdas.c | 2 +- >> drivers/staging/comedi/drivers/daqboard2000.c | 4 ++-- >> drivers/staging/comedi/drivers/ni_labpc.c | 2 +- >> drivers/staging/comedi/drivers/ni_mio_common.c | 2 +- >> drivers/staging/comedi/drivers/plx9080.h | 2 +- >> drivers/staging/comedi/drivers/rtd520.c | 2 +- >> drivers/staging/quickstart/quickstart.c | 3 +-- >> drivers/uio/Kconfig | 6 +++--- >> drivers/usb/serial/Kconfig | 4 ++-- >> drivers/usb/serial/ftdi_sio_ids.h | 12 ++++++------ >> drivers/usb/serial/keyspan.c | 2 +- >> drivers/usb/serial/keyspan.h | 2 +- >> drivers/usb/serial/mct_u232.h | 9 ++++----- >> drivers/usb/storage/Kconfig | 2 +- >> drivers/video/Kconfig | 10 +++++----- >> drivers/video/arcfb.c | 1 - >> drivers/video/epson1355fb.c | 2 +- >> drivers/video/fbcvt.c | 2 +- >> drivers/video/hecubafb.c | 2 +- >> drivers/video/metronomefb.c | 2 +- >> firmware/keyspan_pda/keyspan_pda.S | 2 +- >> firmware/keyspan_pda/xircom_pgs.S | 2 +- >> fs/hostfs/hostfs.h | 7 +------ >> fs/partitions/ldm.c | 2 +- >> fs/partitions/ldm.h | 2 +- >> fs/reiserfs/Kconfig | 6 ++++-- >> fs/reiserfs/README | 2 +- >> include/crypto/gf128mul.h | 4 ++-- >> include/linux/fdreg.h | 2 +- >> include/linux/if_infiniband.h | 2 +- >> include/linux/n_r3964.h | 1 - >> net/ax25/Kconfig | 8 ++++---- >> net/ipv4/Kconfig | 4 ++-- >> net/ipv4/cipso_ipv4.c | 2 +- >> net/ipv4/fib_trie.c | 2 +- >> net/ipv4/netfilter/Kconfig | 2 +- >> net/ipv4/tcp_illinois.c | 2 +- >> net/ipv4/tcp_input.c | 4 ++-- >> net/ipv4/tcp_veno.c | 2 +- >> net/netfilter/nf_conntrack_proto_tcp.c | 4 ++-- >> sound/oss/ac97_codec.c | 7 ++----- >> sound/pci/ens1370.c | 2 +- >> sound/pci/intel8x0.c | 2 +- >> 135 files changed, 184 insertions(+), 209 deletions(-) >> >> diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c >> index bf88f71..aa0e0c5 100644 >> --- a/drivers/ata/pata_it821x.c >> +++ b/drivers/ata/pata_it821x.c >> @@ -15,8 +15,8 @@ >> * May be copied or modified under the terms of the GNU General Public License >> * Based in part on the ITE vendor provided SCSI driver. >> * >> - * Documentation available from >> - * http://www.ite.com.tw/pc/IT8212F_V04.pdf >> + * Documentation available from IT8212F_V04.pdf >> + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91 >> * Some other documents are NDA. >> * >> * The ITE8212 isn't exactly a standard IDE controller. It has two >> diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig >> index be7461c..31c6010 100644 >> --- a/drivers/atm/Kconfig >> +++ b/drivers/atm/Kconfig >> @@ -301,7 +301,7 @@ config ATM_IA >> control memory (128K-1KVC, 512K-4KVC), the size of the packet >> memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3, >> UTP155, UTP25, DS3 and E3). Go to: >> - <http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM> >> + <http://www.iphase.com/> >> for more info about the cards. Say Y (or M to compile as a module >> named iphase) here if you have one of these cards. >> >> diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig >> index 4b66c69..c8ad619 100644 >> --- a/drivers/char/agp/Kconfig >> +++ b/drivers/char/agp/Kconfig >> @@ -34,7 +34,7 @@ config AGP_ALI >> X on the following ALi chipsets. The supported chipsets >> include M1541, M1621, M1631, M1632, M1641,M1647,and M1651. >> For the ALi-chipset question, ALi suggests you refer to >> - <http://www.ali.com.tw/eng/support/index.shtml>. >> + <http://www.ali.com.tw/>. >> >> The M1541 chipset can do AGP 1x and 2x, but note that there is an >> acknowledged incompatibility with Matrox G200 cards. Due to >> diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c >> index e763d33..75b763c 100644 >> --- a/drivers/char/agp/i460-agp.c >> +++ b/drivers/char/agp/i460-agp.c >> @@ -1,7 +1,7 @@ >> /* >> * For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of >> * the "Intel 460GTX Chipset Software Developer's Manual": >> - * http://developer.intel.com/design/itanium/downloads/24870401s.htm >> + * http://www.intel.com/design/archives/itanium/downloads/248704.htm >> */ >> /* >> * 460GX support by Chris Ahna<christopher.j.ahna@xxxxxxxxx> >> diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c >> index 033e150..0848ca9 100644 >> --- a/drivers/char/apm-emulation.c >> +++ b/drivers/char/apm-emulation.c >> @@ -7,8 +7,8 @@ >> * Intel Corporation, Microsoft Corporation. Advanced Power Management >> * (APM) BIOS Interface Specification, Revision 1.2, February 1996. >> * >> - * [This document is available from Microsoft at: >> - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] >> + * This document is available from Microsoft at: >> + * http://www.microsoft.com/whdc/archive/amp_12.mspx >> */ >> #include<linux/module.h> >> #include<linux/poll.h> >> diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c >> index 7b98c06..3ed20e8 100644 >> --- a/drivers/char/ipmi/ipmi_bt_sm.c >> +++ b/drivers/char/ipmi/ipmi_bt_sm.c >> @@ -2,7 +2,7 @@ >> * ipmi_bt_sm.c >> * >> * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part >> - * of the driver architecture at http://sourceforge.net/project/openipmi >> + * of the driver architecture at http://sourceforge.net/projects/openipmi >> * >> * Author: Rocky Craig<first.last@xxxxxx> >> * >> diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c >> index 7bd7c45..3e94c37 100644 >> --- a/drivers/char/ipmi/ipmi_si_intf.c >> +++ b/drivers/char/ipmi/ipmi_si_intf.c >> @@ -1974,8 +1974,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info) >> >> /* >> * Defined at >> - * http://h21007.www2.hp.com/portal/download/files >> - * /unprot/hpspmi.pdf >> + * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf >> */ >> struct SPMITable { >> s8 Signature[4]; >> diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c >> index a98290d..88dda0c 100644 >> --- a/drivers/char/n_r3964.c >> +++ b/drivers/char/n_r3964.c >> @@ -4,7 +4,6 @@ >> * Copyright by >> * Philips Automation Projects >> * Kassel (Germany) >> - * http://www.pap-philips.de >> * ----------------------------------------------------------- >> * This software may be used and distributed according to the terms of >> * the GNU General Public License, incorporated herein by reference. >> diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig >> index ffa0efc..6614416 100644 >> --- a/drivers/char/pcmcia/Kconfig >> +++ b/drivers/char/pcmcia/Kconfig >> @@ -28,7 +28,7 @@ config CARDMAN_4000 >> >> This kernel driver requires additional userspace support, either >> by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/), >> - or via the cm4000 backend of OpenCT (http://www.opensc.com/). >> + or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc). >> >> config CARDMAN_4040 >> tristate "Omnikey CardMan 4040 support" >> @@ -41,7 +41,7 @@ config CARDMAN_4040 >> in I/O space. To use the kernel driver, you will need either the >> PC/SC ifdhandler provided from the Omnikey homepage >> (http://www.omnikey.com/), or a current development version of OpenCT >> - (http://www.opensc.org/). >> + (http://www.opensc-project.org/opensc). >> >> config IPWIRELESS >> tristate "IPWireless 3G UMTS PCMCIA card support" >> diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig >> index 4dc338f..f6595ab 100644 >> --- a/drivers/char/tpm/Kconfig >> +++ b/drivers/char/tpm/Kconfig >> @@ -58,6 +58,6 @@ config TCG_INFINEON >> To compile this driver as a module, choose M here; the module >> will be called tpm_infineon. >> Further information on this driver and the supported hardware >> - can be found at http://www.prosec.rub.de/tpm >> + can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ >> >> endif # TCG_TPM >> diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c >> index f584407..76da32e 100644 >> --- a/drivers/char/tpm/tpm_infineon.c >> +++ b/drivers/char/tpm/tpm_infineon.c >> @@ -7,7 +7,7 @@ >> * Copyright (C) 2005, Marcel Selhorst<m.selhorst@xxxxxxxxxx> >> * Sirrix AG - security technologies, http://www.sirrix.com and >> * Applied Data Security Group, Ruhr-University Bochum, Germany >> - * Project-Homepage: http://www.prosec.rub.de/tpm >> + * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ >> * >> * This program is free software; you can redistribute it and/or >> * modify it under the terms of the GNU General Public License as >> diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c >> index 0709681..413f0df 100644 >> --- a/drivers/edac/edac_device_sysfs.c >> +++ b/drivers/edac/edac_device_sysfs.c >> @@ -1,7 +1,7 @@ >> /* >> * file for managing the edac_device class of devices for EDAC >> * >> - * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com) >> + * (C) 2007 SoftwareBitMaker >> * >> * This file may be distributed under the terms of the >> * GNU General Public License. >> diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c >> index a2fa1fe..678405a 100644 >> --- a/drivers/edac/i82443bxgx_edac.c >> +++ b/drivers/edac/i82443bxgx_edac.c >> @@ -12,7 +12,7 @@ >> * 440GX fix by Jason Uhlenkott<juhlenko@xxxxxxxxxx>. >> * >> * Written with reference to 82443BX Host Bridge Datasheet: >> - * http://www.intel.com/design/chipsets/440/documentation.htm >> + * http://download.intel.com/design/chipsets/datashts/29063301.pdf >> * references to this document given in []. >> * >> * This module doesn't support the 440LX, but it may be possible to >> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig >> index 280c9b5..32e67a1 100644 >> --- a/drivers/firmware/Kconfig >> +++ b/drivers/firmware/Kconfig >> @@ -73,8 +73,8 @@ config EFI_PCDP >> on how the driver discovers devices. >> >> You must also enable the appropriate drivers (serial, VGA, etc.) >> - >> - See<http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf> >> + See DIG64_HCDPv20_042804.pdf available from >> + <http://www.dig64.org/specifications/> >> >> config DELL_RBU >> tristate "BIOS update support for DELL systems via sysfs" >> diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c >> index f287fe7..96c25d9 100644 >> --- a/drivers/firmware/edd.c >> +++ b/drivers/firmware/edd.c >> @@ -15,7 +15,7 @@ >> * made in setup.S, copied to safe structures in setup.c, >> * and presents it in sysfs. >> * >> - * Please see http://linux.dell.com/edd30/results.html for >> + * Please see http://linux.dell.com/edd/results.html for >> * the list of BIOSs which have been reported to implement EDD. >> * >> * This program is free software; you can redistribute it and/or modify >> diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h >> index ce910d6..e098c6e 100644 >> --- a/drivers/firmware/pcdp.h >> +++ b/drivers/firmware/pcdp.h >> @@ -1,8 +1,8 @@ >> /* >> * Definitions for PCDP-defined console devices >> * >> - * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf >> - * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf >> + * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v10.a and v2.0 resp.), >> + * please see<http://www.dig64.org/specifications/> >> * >> * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P. >> * Khalid Aziz<khalid.aziz@xxxxxx> >> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c >> index 949326d..58e65f9 100644 >> --- a/drivers/gpu/drm/drm_modes.c >> +++ b/drivers/gpu/drm/drm_modes.c >> @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline); >> * according to the hdisplay, vdisplay, vrefresh. >> * It is based from the VESA(TM) Coordinated Video Timing Generator by >> * Graham Loveridge April 9, 2003 available at >> - * http://www.vesa.org/public/CVT/CVTd6r1.xls >> + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls >> * >> * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. >> * What I have done is to translate it by using integer calculation. >> diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c >> index 251b631..60befc0 100644 >> --- a/drivers/hwmon/adm1025.c >> +++ b/drivers/hwmon/adm1025.c >> @@ -12,7 +12,7 @@ >> * resolution of about 0.5% of the nominal value). Temperature values are >> * reported with a 1 deg resolution and a 3 deg accuracy. Complete >> * datasheet can be obtained from Analog's website at: >> - * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html >> + * http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025 >> * >> * This driver also supports the ADM1025A, which differs from the ADM1025 >> * only in that it has "open-drain VID inputs while the ADM1025 has >> diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c >> index 65335b2..4bf969c 100644 >> --- a/drivers/hwmon/adm1026.c >> +++ b/drivers/hwmon/adm1026.c >> @@ -6,7 +6,7 @@ >> >> Chip details at: >> >> -<http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf> >> +<http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026> >> >> This program is free software; you can redistribute it and/or modify >> it under the terms of the GNU General Public License as published by >> diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c >> index 9638d58..95cbfb3 100644 >> --- a/drivers/hwmon/f75375s.c >> +++ b/drivers/hwmon/f75375s.c >> @@ -6,10 +6,10 @@ >> * Datasheets available at: >> * >> * f75375: >> - * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf >> + * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf >> * >> * f75373: >> - * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf >> + * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf >> * >> * This program is free software; you can redistribute it and/or modify >> * it under the terms of the GNU General Public License as published by >> diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c >> index 1f63d1a..1d6a6fa 100644 >> --- a/drivers/hwmon/g760a.c >> +++ b/drivers/hwmon/g760a.c >> @@ -5,7 +5,7 @@ >> Copyright (C) 2007 Herbert Valerio Riedel<hvr@xxxxxxx> >> >> Complete datasheet is available at GMT's website: >> - http://www.gmt.com.tw/datasheet/g760a.pdf >> + http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf >> >> This program is free software; you can redistribute it and/or modify >> it under the terms of the GNU General Public License as published by >> diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c >> index bf0862a..897702d 100644 >> --- a/drivers/hwmon/hwmon-vid.c >> +++ b/drivers/hwmon/hwmon-vid.c >> @@ -38,7 +38,7 @@ >> * available at http://developer.intel.com/. >> * >> * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094, >> - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF >> + * http://developer.amd.com/documentation/articles/pages/1212200690_2.aspx >> * Table 74. VID Code Voltages >> * This corresponds to an arbitrary VRM code of 24 in the functions below. >> * These CPU models (K8 revision<= E) have 5 VID pins. See also: >> diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c >> index 4516369..97d98fb 100644 >> --- a/drivers/ide/hpt366.c >> +++ b/drivers/ide/hpt366.c >> @@ -12,7 +12,7 @@ >> * >> * >> * HighPoint has its own drivers (open source except for the RAID part) >> - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/. >> + * available from http://www.highpoint-tech.com/USA_new/service_support.htm >> * This may be useful to anyone wanting to work on this driver, however do not >> * trust them too much since the code tends to become less and less meaningful >> * as the time passes... :-/ >> diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c >> index d81e496..808bcdc 100644 >> --- a/drivers/ide/ht6560b.c >> +++ b/drivers/ide/ht6560b.c >> @@ -10,7 +10,6 @@ >> * Author: Mikko Ala-Fossi<maf@xxxxxx> >> * Jan Evert van Grootheest<j.e.van.grootheest@xxxxxxxxx> >> * >> - * Try: http://www.maf.iki.fi/~maf/ht6560b/ >> */ >> >> #define DRV_NAME "ht6560b" >> diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig >> index 89d70de..6e35ecc 100644 >> --- a/drivers/infiniband/Kconfig >> +++ b/drivers/infiniband/Kconfig >> @@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD >> Userspace InfiniBand Management Datagram (MAD) support. This >> is the kernel side of the userspace MAD support, which allows >> userspace processes to send and receive MADs. You will also >> - need libibumad from<http://www.openib.org>. >> + need libibumad from<http://www.openfabrics.org/downloads/management/>. >> >> config INFINIBAND_USER_ACCESS >> tristate "InfiniBand userspace access (verbs and CM)" >> @@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS >> to set up connections and directly access InfiniBand >> hardware for fast-path operations. You will also need >> libibverbs, libibcm and a hardware driver library from >> - <http://www.openib.org>. >> + <http://www.openfabrics.org/git/>. >> >> config INFINIBAND_USER_MEM >> bool >> diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig >> index 2acec3f..2b6352b 100644 >> --- a/drivers/infiniband/hw/cxgb3/Kconfig >> +++ b/drivers/infiniband/hw/cxgb3/Kconfig >> @@ -10,7 +10,7 @@ config INFINIBAND_CXGB3 >> our website at<http://www.chelsio.com>. >> >> For customer support, please visit our customer support page at >> - <http://www.chelsio.com/support.htm>. >> + <http://www.chelsio.com/support.html>. >> >> Please send feedback to<linux-bugs@xxxxxxxxxxx>. >> >> diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig >> index ccb85ea..6b7e6c5 100644 >> --- a/drivers/infiniband/hw/cxgb4/Kconfig >> +++ b/drivers/infiniband/hw/cxgb4/Kconfig >> @@ -10,7 +10,7 @@ config INFINIBAND_CXGB4 >> our website at<http://www.chelsio.com>. >> >> For customer support, please visit our customer support page at >> - <http://www.chelsio.com/support.htm>. >> + <http://www.chelsio.com/support.html>. >> >> Please send feedback to<linux-bugs@xxxxxxxxxxx>. >> >> diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig >> index b411c51..d00af71 100644 >> --- a/drivers/infiniband/ulp/iser/Kconfig >> +++ b/drivers/infiniband/ulp/iser/Kconfig >> @@ -9,4 +9,4 @@ config INFINIBAND_ISER >> >> The iSER protocol is defined by IETF. >> See<http://www.ietf.org/rfc/rfc5046.txt> >> - and<http://www.infinibandta.org/members/spec/Annex_iSER.PDF> >> + and<http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF> >> diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c >> index 0ffaf2c..e68e497 100644 >> --- a/drivers/input/joystick/gamecon.c >> +++ b/drivers/input/joystick/gamecon.c >> @@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc) >> * PSX support >> * >> * See documentation at: >> - * http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt >> + * http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt >> * http://www.gamesx.com/controldata/psxcont/psxcont.htm >> - * ftp://milano.usal.es/pablo/ >> * >> */ >> >> diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c >> index 2b0eba6..b09c7d1 100644 >> --- a/drivers/input/misc/cm109.c >> +++ b/drivers/input/misc/cm109.c >> @@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode) >> >> /* >> * Keymap for ATCom AU-100 >> - * http://www.atcom.cn/En_products_AU100.html >> + * http://www.atcom.cn/products.html >> * http://www.packetizer.com/products/au100/ >> * http://www.voip-info.org/wiki/view/AU-100 >> * >> diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig >> index c714ca2..bf5fd7f 100644 >> --- a/drivers/input/mouse/Kconfig >> +++ b/drivers/input/mouse/Kconfig >> @@ -30,6 +30,7 @@ config MOUSE_PS2 >> <http://w1.894.telia.com/~u89404340/touchpad/index.html> >> and a new version of GPM at: >> <http://www.geocities.com/dt_or/gpm/gpm.html> >> + <http://xorg.freedesktop.org/archive/individual/driver/> >> to take advantage of the advanced features of the touchpad. >> >> If unsure, say Y. >> diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c >> index 88121c5..1fd8f5e 100644 >> --- a/drivers/input/mouse/touchkit_ps2.c >> +++ b/drivers/input/mouse/touchkit_ps2.c >> @@ -21,8 +21,8 @@ >> * >> * Based upon touchkitusb.c >> * >> - * Vendor documentation is available in support section of: >> - * http://www.egalax.com.tw/ >> + * Vendor documentation is available at: >> + * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pdf >> */ >> >> #include<linux/kernel.h> >> diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c >> index efd3aeb..36e57de 100644 >> --- a/drivers/input/touchscreen/mk712.c >> +++ b/drivers/input/touchscreen/mk712.c >> @@ -17,7 +17,7 @@ >> * found in Gateway AOL Connected Touchpad computers. >> * >> * Documentation for ICS MK712 can be found at: >> - * http://www.icst.com/pdf/mk712.pdf >> + * http://www.idt.com/products/getDoc.cfm?docID=18713923 >> */ >> >> /* >> diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c >> index 861bdf3..d501393 100644 >> --- a/drivers/isdn/i4l/isdn_audio.c >> +++ b/drivers/isdn/i4l/isdn_audio.c >> @@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt, unsigned char *in, >> >> /* >> * Goertzel algorithm. >> - * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/ >> + * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/ >> * for more info. >> * Result is stored into an sk_buff and queued up for later >> * evaluation. >> diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c >> index d0d2213..9e3e2c5 100644 >> --- a/drivers/macintosh/therm_adt746x.c >> +++ b/drivers/macintosh/therm_adt746x.c >> @@ -3,9 +3,9 @@ >> * >> * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt >> * >> - * Documentation from >> - * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf >> - * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf >> + * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf >> + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467 >> + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460 >> * >> */ >> >> diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c >> index 1e9fbfa..0f590b3 100644 >> --- a/drivers/media/IR/keymaps/rc-manli.c >> +++ b/drivers/media/IR/keymaps/rc-manli.c >> @@ -13,7 +13,6 @@ >> #include<media/rc-map.h> >> >> /* Michael Tokarev<mjt@xxxxxxxxxx> >> - http://www.corpit.ru/mjt/beholdTV/remote_control.jpg >> keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at >> least, and probably other cards too. >> The "ascii-art picture" below (in comments, first row >> diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c >> index a6be529..87279d9 100644 >> --- a/drivers/media/dvb/ttpci/av7110.c >> +++ b/drivers/media/dvb/ttpci/av7110.c >> @@ -26,7 +26,7 @@ >> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html >> * >> * >> - * the project's page is at http://www.linuxtv.org/dvb/ >> + * the project's page is at http://www.linuxtv.org/ >> */ >> >> >> @@ -2290,13 +2290,7 @@ static int frontend_init(struct av7110 *av7110) >> /* Budgetpatch note: >> * Original hardware design by Roberto Deza: >> * There is a DVB_Wiki at >> - * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page >> - * where is described this 'DVB TT Budget Patch', on Card Modding: >> - * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch >> - * On the short description there is also a link to a external file, >> - * with more details: >> - * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip >> - * >> + * http://www.linuxtv.org/ >> * New software triggering design by Emard that works on >> * original Roberto Deza's hardware: >> * >> diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c >> index 13efba9..878da6a 100644 >> --- a/drivers/media/dvb/ttpci/av7110_av.c >> +++ b/drivers/media/dvb/ttpci/av7110_av.c >> @@ -25,7 +25,7 @@ >> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html >> * >> * >> - * the project's page is at http://www.linuxtv.org/dvb/ >> + * the project's page is at http://www.linuxtv.org/ >> */ >> >> #include<linux/types.h> >> diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c >> index 4eba35a..7564c26 100644 >> --- a/drivers/media/dvb/ttpci/av7110_ca.c >> +++ b/drivers/media/dvb/ttpci/av7110_ca.c >> @@ -25,7 +25,7 @@ >> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html >> * >> * >> - * the project's page is at http://www.linuxtv.org/dvb/ >> + * the project's page is at http://www.linuxtv.org/ >> */ >> >> #include<linux/kernel.h> >> diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c >> index e162691..f1cbfe5 100644 >> --- a/drivers/media/dvb/ttpci/av7110_hw.c >> +++ b/drivers/media/dvb/ttpci/av7110_hw.c >> @@ -22,7 +22,7 @@ >> * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. >> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html >> * >> - * the project's page is at http://www.linuxtv.org/dvb/ >> + * the project's page is at http://www.linuxtv.org/ >> */ >> >> /* for debugging ARM communication: */ >> diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c >> index 8986d96..ac20c5b 100644 >> --- a/drivers/media/dvb/ttpci/av7110_v4l.c >> +++ b/drivers/media/dvb/ttpci/av7110_v4l.c >> @@ -22,7 +22,7 @@ >> * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. >> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html >> * >> - * the project's page is at http://www.linuxtv.org/dvb/ >> + * the project's page is at http://www.linuxtv.org/ >> */ >> >> #include<linux/kernel.h> >> diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c >> index 983672a..97afc01 100644 >> --- a/drivers/media/dvb/ttpci/budget-av.c >> +++ b/drivers/media/dvb/ttpci/budget-av.c >> @@ -30,7 +30,7 @@ >> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html >> * >> * >> - * the project's page is at http://www.linuxtv.org/dvb/ >> + * the project's page is at http://www.linuxtv.org/ >> */ >> >> #include "budget.h" >> diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c >> index 13ac9e3..a9c2c32 100644 >> --- a/drivers/media/dvb/ttpci/budget-ci.c >> +++ b/drivers/media/dvb/ttpci/budget-ci.c >> @@ -26,7 +26,7 @@ >> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html >> * >> * >> - * the project's page is at http://www.linuxtv.org/dvb/ >> + * the project's page is at http://www.linuxtv.org/ >> */ >> >> #include<linux/module.h> >> diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c >> index ba18e56..0546613 100644 >> --- a/drivers/media/dvb/ttpci/budget-core.c >> +++ b/drivers/media/dvb/ttpci/budget-core.c >> @@ -31,7 +31,7 @@ >> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html >> * >> * >> - * the project's page is at http://www.linuxtv.org/dvb/ >> + * the project's page is at http://www.linuxtv.org/ >> */ >> >> >> diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c >> index 9c92f9d..5798355 100644 >> --- a/drivers/media/dvb/ttpci/budget-patch.c >> +++ b/drivers/media/dvb/ttpci/budget-patch.c >> @@ -27,7 +27,7 @@ >> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html >> * >> * >> - * the project's page is at http://www.linuxtv.org/dvb/ >> + * the project's page is at http://www.linuxtv.org/ >> */ >> >> #include "av7110.h" >> diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c >> index 874a10a..d238fb9 100644 >> --- a/drivers/media/dvb/ttpci/budget.c >> +++ b/drivers/media/dvb/ttpci/budget.c >> @@ -31,7 +31,7 @@ >> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html >> * >> * >> - * the project's page is at http://www.linuxtv.org/dvb/ >> + * the project's page is at http://www.linuxtv.org/ >> */ >> >> #include "budget.h" >> diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c >> index 4349213..255d40d 100644 >> --- a/drivers/media/radio/radio-maxiradio.c >> +++ b/drivers/media/radio/radio-maxiradio.c >> @@ -13,7 +13,7 @@ >> * anybody does please mail me. >> * >> * For the pdf file see: >> - * http://www.semiconductors.philips.com/pip/TEA5757H/V1 >> + * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf >> * >> * >> * CHANGES: >> diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c >> index 0343928..a5363ed 100644 >> --- a/drivers/media/radio/radio-typhoon.c >> +++ b/drivers/media/radio/radio-typhoon.c >> @@ -1,8 +1,6 @@ >> /* Typhoon Radio Card driver for radio support >> * (c) 1999 Dr. Henrik Seidel<Henrik.Seidel@xxxxxx> >> * >> - * Card manufacturer: >> - * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e >> * >> * Notes on the hardware >> * >> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig >> index f6e4d04..d000522 100644 >> --- a/drivers/media/video/Kconfig >> +++ b/drivers/media/video/Kconfig >> @@ -978,7 +978,7 @@ config USB_STKWEBCAM >> Supported devices are typically found in some Asus laptops, >> with USB id 174f:a311 and 05e1:0501. Other Syntek cameras >> may be supported by the stk11xx driver, from which this is >> - derived, see http://stk11xx.sourceforge.net >> + derived, see<http://sourceforge.net/projects/syntekdriver/> >> >> To compile this driver as a module, choose M here: the >> module will be called stkwebcam. >> diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c >> index be35e69..9536f1a 100644 >> --- a/drivers/media/video/cafe_ccic.c >> +++ b/drivers/media/video/cafe_ccic.c >> @@ -4,7 +4,7 @@ >> * sensor. >> * >> * The data sheet for this device can be found at: >> - * http://www.marvell.com/products/pcconn/88ALP01.jsp >> + * http://www.marvell.com/products/pc_connectivity/88alp01/ >> * >> * Copyright 2006 One Laptop Per Child Association, Inc. >> * Copyright 2006-7 Jonathan Corbet<corbet@xxxxxxx> >> diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c >> index 6b805af..fe10909 100644 >> --- a/drivers/media/video/cx18/cx18-cards.c >> +++ b/drivers/media/video/cx18/cx18-cards.c >> @@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = { >> .tv = { 0x61, 0x60, I2C_CLIENT_END }, >> }; >> >> -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii >> +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ >> This keeps the PCI ID database up to date. Note that the entries >> must be added under vendor 0x4444 (Conexant) as subsystem IDs. >> New vendor IDs should still be added to the vendor ID list. */ >> diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c >> index abd64e8..53a6782 100644 >> --- a/drivers/media/video/cx23885/cx23885-417.c >> +++ b/drivers/media/video/cx23885/cx23885-417.c >> @@ -7,7 +7,7 @@ >> * (c) 2008 Steven Toth<stoth@xxxxxxxxxxx> >> * - CX23885/7/8 support >> * >> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), >> + * Includes parts from the ivtv driver<http://sourceforge.net/projects/ivtv/> >> * >> * This program is free software; you can redistribute it and/or modify >> * it under the terms of the GNU General Public License as published by >> diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c >> index e46e1ce..660b2a9 100644 >> --- a/drivers/media/video/cx88/cx88-blackbird.c >> +++ b/drivers/media/video/cx88/cx88-blackbird.c >> @@ -9,7 +9,7 @@ >> * (c) 2005-2006 Mauro Carvalho Chehab<mchehab@xxxxxxxxxxxxx> >> * - video_ioctl2 conversion >> * >> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), >> + * Includes parts from the ivtv driver<http://sourceforge.net/projects/ivtv/> >> * >> * This program is free software; you can redistribute it and/or modify >> * it under the terms of the GNU General Public License as published by >> diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c >> index ca1fd32..87afbbe 100644 >> --- a/drivers/media/video/ivtv/ivtv-cards.c >> +++ b/drivers/media/video/ivtv/ivtv-cards.c >> @@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = { >> >> /********************** card configuration *******************************/ >> >> -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii >> +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ >> This keeps the PCI ID database up to date. Note that the entries >> must be added under vendor 0x4444 (Conexant) as subsystem IDs. >> New vendor IDs should still be added to the vendor ID list. */ >> diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c >> index ef0c817..b1dbcf1 100644 >> --- a/drivers/media/video/mxb.c >> +++ b/drivers/media/video/mxb.c >> @@ -3,7 +3,7 @@ >> >> Copyright (C) 1998-2006 Michael Hunold<michael@xxxxxxx> >> >> - Visit http://www.mihu.de/linux/saa7146/mxb/ >> + Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html >> for further details about this card. >> >> This program is free software; you can redistribute it and/or modify >> diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c >> index 2782f94..2e86fdc 100644 >> --- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c >> +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c >> @@ -4,7 +4,6 @@ >> * * >> * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio * >> *<medaglia@xxxxxxxxxxx> * >> - * http://cadu.homelinux.com:8080/ * >> * * >> * Support for SN9C103, DAC Magnitude, exposure and green gain controls * >> * added by Luca Risolia<luca.risolia@xxxxxxxxxxxxxxx> * >> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig >> index b743312..3b28933 100644 >> --- a/drivers/misc/Kconfig >> +++ b/drivers/misc/Kconfig >> @@ -112,8 +112,8 @@ config IBM_ASM >> >> WARNING: This software may not be supported or function >> correctly on your IBM server. Please consult the IBM ServerProven >> - website<http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for >> - information on the specific driver level and support statement >> + website<http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> >> + for information on the specific driver level and support statement >> for your IBM server. >> >> config PHANTOM >> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c >> index 3e6c47b..ba29d2f 100644 >> --- a/drivers/mtd/chips/cfi_cmdset_0002.c >> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c >> @@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) >> >> /* >> * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4 >> - * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 >> - * http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf >> + * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 >> + * http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf >> * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf >> */ >> if (extp->MajorVersion != '1' || >> diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c >> index f4359fe..caf6041 100644 >> --- a/drivers/mtd/devices/lart.c >> +++ b/drivers/mtd/devices/lart.c >> @@ -17,7 +17,7 @@ >> * - January 2000 >> * >> * [2] MTD internal API documentation >> - * - http://www.linux-mtd.infradead.org/tech/ >> + * - http://www.linux-mtd.infradead.org/ >> * >> * Limitations: >> * >> diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c >> index 4d6a64c..037b399 100644 >> --- a/drivers/mtd/ftl.c >> +++ b/drivers/mtd/ftl.c >> @@ -51,7 +51,7 @@ >> >> Use of the FTL format for non-PCMCIA applications may be an >> infringement of these patents. For additional information, >> - contact M-Systems (http://www.m-sys.com) directly. >> + contact M-Systems directly. M-Systems since acquired by Sandisk. >> >> ======================================================================*/ >> #include<linux/mtd/blktrans.h> >> diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig >> index 701d942..9622126 100644 >> --- a/drivers/mtd/maps/Kconfig >> +++ b/drivers/mtd/maps/Kconfig >> @@ -172,7 +172,7 @@ config MTD_OCTAGON >> This provides a 'mapping' driver which supports the way in which >> the flash chips are connected in the Octagon-5066 Single Board >> Computer. More information on the board is available at >> - <http://www.octagonsystems.com/CPUpages/5066.html>. >> + <http://www.octagonsystems.com/products/5066.aspx>. >> >> config MTD_VMAX >> tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301" >> @@ -284,7 +284,7 @@ config MTD_TQM8XXL >> chips, currently uses AMD one. This 'mapping' driver supports >> that arrangement, allowing the CFI probe and command set driver >> code to communicate with the chips on the TQM8xxL board. More at >> - <http://www.denx.de/embedded-ppc-en.html>. >> + <http://www.denx.de/wiki/PPCEmbedded/>. >> >> config MTD_RPXLITE >> tristate "CFI Flash device mapped on RPX Lite or CLLF" >> diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c >> index db1dfc5..e06c898 100644 >> --- a/drivers/mtd/nand/cafe_nand.c >> +++ b/drivers/mtd/nand/cafe_nand.c >> @@ -2,7 +2,7 @@ >> * Driver for One Laptop Per Child âCAFÃâ controller, aka Marvell 88ALP01 >> * >> * The data sheet for this device can be found at: >> - * http://www.marvell.com/products/pcconn/88ALP01.jsp >> + * http://wiki.laptop.org/go/Datasheets >> * >> * Copyright  2006 Red Hat, Inc. >> * Copyright  2006 David Woodhouse<dwmw2@xxxxxxxxxxxxx> >> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig >> index 2cc81a5..5b66842 100644 >> --- a/drivers/net/Kconfig >> +++ b/drivers/net/Kconfig >> @@ -921,7 +921,7 @@ config SMC91X >> including the SMC91C94 and the SMC91C111. Say Y if you want it >> compiled into the kernel, and read the file >> <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, >> - available from<http://www.linuxdoc.org/docs.html#howto>. >> + available from<http://www.tldp.org/docs.html#howto>. >> >> This driver is also available as a module ( = code which can be >> inserted in and removed from the running kernel whenever you want). >> @@ -1031,7 +1031,7 @@ config SMC911X >> including the new LAN9115, LAN9116, LAN9117, and LAN9118. >> Say Y if you want it compiled into the kernel, >> and read the Ethernet-HOWTO, available from >> - <http://www.linuxdoc.org/docs.html#howto>. >> + <http://www.tldp.org/docs.html#howto>. >> >> This driver is also available as a module. The module will be >> called smc911x. If you want to compile it as a module, say M >> @@ -1513,7 +1513,7 @@ config E100 >> >> For the latest Intel PRO/100 network driver for Linux, see: >> >> - <http://appsr.intel.com/scripts-df/support_intel.asp> >> + <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> >> >> More specific information on configuring the driver is in >> <file:Documentation/networking/e100.txt>. >> @@ -1539,9 +1539,8 @@ config FEALNX >> select CRC32 >> select MII >> help >> - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet >> - cards. Specifications and data at >> - <http://www.myson.com.hk/mtd/datasheet/>. >> + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet >> + cards.<http://www.myson.com.tw/> >> >> config NATSEMI >> tristate "National Semiconductor DP8381x series PCI Ethernet support" >> @@ -1715,7 +1714,7 @@ config SMSC9420 >> This is a driver for SMSC's LAN9420 PCI ethernet adapter. >> Say Y if you want it compiled into the kernel, >> and read the Ethernet-HOWTO, available from >> - <http://www.linuxdoc.org/docs.html#howto>. >> + <http://www.tldp.org/docs.html#howto>. >> >> This driver is also available as a module. The module will be >> called smsc9420. If you want to compile it as a module, say M >> @@ -2550,7 +2549,7 @@ config CHELSIO_T1 >> our website at<http://www.chelsio.com>. >> >> For customer support, please visit our customer support page at >> -<http://www.chelsio.com/support.htm>. >> +<http://www.chelsio.com/support.html>. >> >> Please send feedback to<linux-bugs@xxxxxxxxxxx>. >> >> @@ -2582,7 +2581,7 @@ config CHELSIO_T3 >> our website at<http://www.chelsio.com>. >> >> For customer support, please visit our customer support page at >> - <http://www.chelsio.com/support.htm>. >> + <http://www.chelsio.com/support.html>. >> >> Please send feedback to<linux-bugs@xxxxxxxxxxx>. >> >> @@ -2607,7 +2606,7 @@ config CHELSIO_T4 >> our website at<http://www.chelsio.com>. >> >> For customer support, please visit our customer support page at >> - <http://www.chelsio.com/support.htm>. >> + <http://www.chelsio.com/support.html>. >> >> Please send feedback to<linux-bugs@xxxxxxxxxxx>. >> >> @@ -2630,7 +2629,7 @@ config CHELSIO_T4VF >> our website at<http://www.chelsio.com>. >> >> For customer support, please visit our customer support page at >> - <http://www.chelsio.com/support.htm>. >> + <http://www.chelsio.com/support.html>. >> >> Please send feedback to<linux-bugs@xxxxxxxxxxx>. >> >> diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig >> index 0a0e0cd..f5a8916 100644 >> --- a/drivers/net/appletalk/Kconfig >> +++ b/drivers/net/appletalk/Kconfig >> @@ -18,7 +18,7 @@ config ATALK >> >> General information about how to connect Linux, Windows machines and >> Macs is on the WWW at<http://www.eats.com/linux_mac_win.html>. The >> - NET-3-HOWTO, available from >> + NET3-4-HOWTO, available from >> <http://www.tldp.org/docs.html#howto>, contains valuable >> information as well. >> >> diff --git a/drivers/net/atp.c b/drivers/net/atp.c >> index bd2f9d3..0eee044 100644 >> --- a/drivers/net/atp.c >> +++ b/drivers/net/atp.c >> @@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; /* The data transfer mode. */ >> >> In 1997 Realtek made available the documentation for the second generation >> RTL8012 chip, which has lead to several driver improvements. >> - http://www.realtek.com.tw/cn/cn.html >> + http://www.realtek.com.tw/ >> >> Theory of Operation >> >> diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c >> index 57c8ac0..c6e2571 100644 >> --- a/drivers/net/epic100.c >> +++ b/drivers/net/epic100.c >> @@ -131,8 +131,8 @@ IIIa. Ring buffers >> >> IVb. References >> >> -http://www.smsc.com/main/tools/discontinued/83c171.pdf >> -http://www.smsc.com/main/tools/discontinued/83c175.pdf >> +http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf >> +http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf >> http://scyld.com/expert/NWay.html >> http://www.national.com/pf/DP/DP83840A.html >> >> diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig >> index 62d5d5c..95dbcfd 100644 >> --- a/drivers/net/hamradio/Kconfig >> +++ b/drivers/net/hamradio/Kconfig >> @@ -73,7 +73,7 @@ config DMASCC >> certain parameters, such as channel access timing, clock mode, and >> DMA channel. This is accomplished with a small utility program, >> dmascc_cfg, available at >> - <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to >> + <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to >> get at least version 1.27 of dmascc_cfg, as older versions will not >> work with the current driver. >> >> diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c >> index 294ccfb..8de3273 100644 >> --- a/drivers/net/ibmlana.c >> +++ b/drivers/net/ibmlana.c >> @@ -23,7 +23,7 @@ paper sources: >> 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0 >> Document Number SC30-3661-00' by IBM for info on the adapter itself >> >> - Also see http://www.natsemi.com/ >> + Also see http://www.national.com/analog >> >> special acknowledgements to: >> - Bob Eager for helping me out with documentation from IBM >> diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h >> index 36c3060..4dc39e5 100644 >> --- a/drivers/net/irda/donauboe.h >> +++ b/drivers/net/irda/donauboe.h >> @@ -54,7 +54,7 @@ >> /* anyone who has. HOWEVER the chip bears a striking resemblence */ >> /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */ >> /* the documentation for this is freely available at */ >> -/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */ >> +/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */ >> /* The mapping between the registers in that document and the */ >> /* Registers in the 701 oboe chip are as follows */ >> >> diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c >> index 56f3fc4..627b619 100644 >> --- a/drivers/net/pci-skeleton.c >> +++ b/drivers/net/pci-skeleton.c >> @@ -78,7 +78,7 @@ that almost all frames will need to be copied to an alignment buffer. >> >> IVb. References >> >> -http://www.realtek.com.tw/cn/cn.html >> +http://www.realtek.com.tw/ >> http://www.scyld.com/expert/NWay.html >> >> IVc. Errata >> diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c >> index c683f77..e092679 100644 >> --- a/drivers/net/pcmcia/3c574_cs.c >> +++ b/drivers/net/pcmcia/3c574_cs.c >> @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad. >> V. References >> >> http://www.scyld.com/expert/NWay.html >> -http://www.national.com/pf/DP/DP83840.html >> +http://www.national.com/opf/DP/DP83840A.html >> >> Thanks to Terry Murphy of 3Com for providing development information for >> earlier 3Com products. >> diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c >> index 8c4067a..12fb560 100644 >> --- a/drivers/net/sc92031.c >> +++ b/drivers/net/sc92031.c >> @@ -15,7 +15,7 @@ >> * Rewritten for 2.6 by Cesar Eduardo Barros >> * >> * A datasheet for this chip can be found at >> - * http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf >> + * http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf >> */ >> >> /* Note about set_mac_address: I don't know how to change the hardware >> diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c >> index ccee3ed..ef000b2 100644 >> --- a/drivers/net/tlan.c >> +++ b/drivers/net/tlan.c >> @@ -78,7 +78,7 @@ >> * - Updated tlan.txt accordingly. >> * - Adjusted minimum/maximum frame length. >> * - There is now a TLAN website up at >> - * http://tlan.kernel.dk >> + * http://hp.sourceforge.net/ >> * >> * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now >> * reports PHY information when used with Donald >> diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c >> index 435ef7d..ccc16d6 100644 >> --- a/drivers/net/tokenring/tms380tr.c >> +++ b/drivers/net/tokenring/tms380tr.c >> @@ -5,7 +5,7 @@ >> * Originally sktr.c: Written 1997 by Christoph Goos >> * >> * A fine result of the Linux Systems Network Architecture Project. >> - * http://www.linux-sna.org >> + * http://www.vanheusden.com/sna/ >> * >> * This software may be used and distributed according to the terms >> * of the GNU General Public License, incorporated herein by reference. >> diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig >> index 516713f..14c02e1 100644 >> --- a/drivers/net/tulip/Kconfig >> +++ b/drivers/net/tulip/Kconfig >> @@ -151,7 +151,7 @@ config ULI526X >> select CRC32 >> ---help--- >> This driver is for ULi M5261/M5263 10/100M Ethernet Controller >> - (<http://www.uli.com.tw/>). >> + (<http://www.nvidia.com/page/uli_drivers.html>). >> >> To compile this driver as a module, choose M here. The module will >> be called uli526x. >> diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c >> index 08555f8..08ad269 100644 >> --- a/drivers/net/usb/plusb.c >> +++ b/drivers/net/usb/plusb.c >> @@ -32,7 +32,7 @@ >> >> >> /* >> - * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com >> + * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/ >> * >> * The protocol and handshaking used here should be bug-compatible >> * with the Linux 2.2 "plusb" driver, by Deti Fliegl. >> diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig >> index d08ce6a..423eb26 100644 >> --- a/drivers/net/wan/Kconfig >> +++ b/drivers/net/wan/Kconfig >> @@ -409,7 +409,7 @@ config CYCLADES_SYNC >> tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)" >> depends on WAN_ROUTER_DRIVERS&& (PCI || ISA) >> ---help--- >> - Cyclom 2X from Cyclades Corporation<http://www.cyclades.com/> is an >> + Cyclom 2X from Cyclades Corporation<http://www.avocent.com/> is an >> intelligent multiprotocol WAN adapter with data transfer rates up to >> 512 Kbps. These cards support the X.25 and SNA related protocols. >> >> diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h >> index ea6362a..97659a0 100644 >> --- a/drivers/net/wireless/ath/ath5k/ath5k.h >> +++ b/drivers/net/wireless/ath/ath5k/ath5k.h >> @@ -351,7 +351,7 @@ struct ath5k_srev_name { >> /* >> * Some of this information is based on Documentation from: >> * >> - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG >> + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG >> * >> * Modulation for Atheros' eXtended Range - range enhancing extension that is >> * supposed to double the distance an Atheros client device can keep a >> diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h >> index 55b4ac6..69a9b34 100644 >> --- a/drivers/net/wireless/ath/ath5k/reg.h >> +++ b/drivers/net/wireless/ath/ath5k/reg.h >> @@ -26,7 +26,6 @@ >> * Atheros presentations and papers like these: >> * >> * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf >> - * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf >> * >> * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf >> * >> diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig >> index b0342a5..8e82379 100644 >> --- a/drivers/net/wireless/p54/Kconfig >> +++ b/drivers/net/wireless/p54/Kconfig >> @@ -8,7 +8,7 @@ config P54_COMMON >> also need to be enabled in order to support any devices. >> >> These devices require softmac firmware which can be found at >> - http://prism54.org/ >> + <http://wireless.kernel.org/en/users/Drivers/p54> >> >> If you choose to build a module, it'll be called p54common. >> >> @@ -20,7 +20,7 @@ config P54_USB >> This driver is for USB isl38xx based wireless cards. >> >> These devices require softmac firmware which can be found at >> - http://prism54.org/ >> + <http://wireless.kernel.org/en/users/Drivers/p54> >> >> If you choose to build a module, it'll be called p54usb. >> >> @@ -34,7 +34,7 @@ config P54_PCI >> supported by the fullmac driver/firmware. >> >> This driver requires softmac firmware which can be found at >> - http://prism54.org/ >> + <http://wireless.kernel.org/en/users/Drivers/p54> >> >> If you choose to build a module, it'll be called p54pci. >> >> diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c >> index dc14420..b5e64d7 100644 >> --- a/drivers/net/wireless/prism54/islpci_hotplug.c >> +++ b/drivers/net/wireless/prism54/islpci_hotplug.c >> @@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0); >> /* In this order: vendor, device, subvendor, subdevice, class, class_mask, >> * driver_data >> * If you have an update for this please contact prism54-devel@xxxxxxxxxxx >> - * The latest list can be found at http://prism54.org/supported_cards.php */ >> + * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */ >> static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = { >> /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ >> { >> diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino >> index 097324f..1627426 100644 >> --- a/drivers/parisc/README.dino >> +++ b/drivers/parisc/README.dino >> @@ -10,8 +10,7 @@ >> ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are >> ** not affected." >> ** >> -** REVISIT: "go/pci_defect" link below is stale. >> -** HP Internal can use<http://hpfcdma.fc.hp.com:80/Dino/> >> +** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=12454&prodSeriesId=44443 >> ** >> ** Product First Good Serial Number >> ** C200/C240 (US) US67350000 >> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c >> index 89ed181..dcc333f 100644 >> --- a/drivers/pci/quirks.c >> +++ b/drivers/pci/quirks.c >> @@ -206,6 +206,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir >> * VIA Apollo KT133 needs PCI latency patch >> * Made according to a windows driver based patch by George E. Breese >> * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm >> + * and http://www.georgebreese.com/net/software/#PCI >> * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for >> * the info on which Mr Breese based his work. >> * >> @@ -996,7 +997,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge) >> /* >> * Common misconfiguration of the MediaGX/Geode PCI master that will >> * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 >> - * datasheets found at http://www.national.com/ds/GX for info on what >> + * datasheets found at http://www.national.com/analog for info on what >> * these bits do.<christer@xxxxxxxxxxx> >> */ >> static void quirk_mediagx_master(struct pci_dev *dev) >> diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c >> index 414d9a6..91a7225 100644 >> --- a/drivers/pcmcia/yenta_socket.c >> +++ b/drivers/pcmcia/yenta_socket.c >> @@ -1073,7 +1073,7 @@ static void yenta_config_init(struct yenta_socket *socket) >> * invisible during PCI scans because of a misconfigured subordinate number >> * of the parent brige - some BIOSes seem to be too lazy to set it right. >> * Does the fixup carefully by checking how far it can go without conflicts. >> - * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. >> + * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. >> */ >> static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) >> { >> diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c >> index 2d8ac43..bc89f39 100644 >> --- a/drivers/pnp/pnpbios/proc.c >> +++ b/drivers/pnp/pnpbios/proc.c >> @@ -11,7 +11,6 @@ >> * >> * The .../escd file is utilized by the lsescd utility written by >> * Gunther Mayer. >> - * http://home.t-online.de/home/gunther.mayer/lsescd >> * >> * The .../legacy_device_resources file is not used yet. >> * >> diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig >> index bbf91ae..03453d4 100644 >> --- a/drivers/scsi/Kconfig >> +++ b/drivers/scsi/Kconfig >> @@ -116,7 +116,7 @@ config CHR_DEV_OSST >> <http://www.tldp.org/docs.html#howto> and >> <file:Documentation/scsi/osst.txt> in the kernel source. >> More info on the OnStream driver may be found on >> - <http://linux1.onstream.nl/test/> >> + <http://sourceforge.net/projects/osst/> >> Please also have a look at the standard st docu, as most of it >> applies to osst as well. >> >> @@ -156,9 +156,9 @@ config CHR_DEV_SG >> directly, so you need some additional software which knows how to >> talk to these devices using the SCSI protocol: >> >> - For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD >> + For scanners, look at SANE (<http://www.sane-project.org/>). For CD >> writer software look at Cdrtools >> - (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>) >> + (<http://cdrecord.berlios.de/private/cdrecord.html>) >> and for burning a "disk at once": CDRDAO >> (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high >> quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). >> @@ -950,6 +950,7 @@ config SCSI_IPS >> ---help--- >> This is support for the IBM ServeRAID hardware RAID controllers. >> See<http://www.developer.ibm.com/welcome/netfinity/serveraid.html> >> + and<http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID> >> for more information. If this driver does not work correctly >> without modification please contact the author by email at >> <ipslinux@xxxxxxxxxxx>. >> @@ -1609,7 +1610,7 @@ config SCSI_DEBUG >> host adapter with one dummy SCSI disk. Each dummy disk uses kernel >> RAM as storage (i.e. it is a ramdisk). To save space when multiple >> dummy disks are simulated, they share the same kernel RAM for >> - their storage. See<http://www.torque.net/sg/sdebug.html> for more >> + their storage. See<http://sg.danny.cz/sg/sdebug26.html> for more >> information. This driver is primarily of use to those testing the >> SCSI and block subsystems. If unsure, say N. >> >> diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c >> index 24110f6..131c95f 100644 >> --- a/drivers/serial/8250.c >> +++ b/drivers/serial/8250.c >> @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up) >> /* >> * Exar ST16C2550 "A2" devices incorrectly detect as >> * having an EFR, and report an ID of 0x0201. See >> - * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf >> + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html >> */ >> if (autoconfig_read_divisor_id(up) == 0x0201&& size_fifo(up) == 16) >> return 1; >> diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c >> index 5318dd3..feb62a8 100644 >> --- a/drivers/serial/bfin_sport_uart.c >> +++ b/drivers/serial/bfin_sport_uart.c >> @@ -10,7 +10,7 @@ >> >> /* >> * This driver and the hardware supported are in term of EE-191 of ADI. >> - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf >> + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf >> * This application note describe how to implement a UART on a Sharc DSP, >> * but this driver is implemented on Blackfin Processor. >> * Transmit Frame Sync is not used by this driver to transfer data out. >> diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h >> index 9ce253e..6d06ce1 100644 >> --- a/drivers/serial/bfin_sport_uart.h >> +++ b/drivers/serial/bfin_sport_uart.h >> @@ -10,7 +10,7 @@ >> >> /* >> * This driver and the hardware supported are in term of EE-191 of ADI. >> - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf >> + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf >> * This application note describe how to implement a UART on a Sharc DSP, >> * but this driver is implemented on Blackfin Processor. >> * Transmit Frame Sync is not used by this driver to transfer data out. >> diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c >> index 9b03d7b..3fa2e16 100644 >> --- a/drivers/serial/uartlite.c >> +++ b/drivers/serial/uartlite.c >> @@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match); >> * Register definitions >> * >> * For register details see datasheet: >> - * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf >> + * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf >> */ >> >> #define ULITE_RX 0x00 >> diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README >> index 96b9717..0d82a6d 100644 >> --- a/drivers/staging/asus_oled/README >> +++ b/drivers/staging/asus_oled/README >> @@ -2,7 +2,7 @@ >> Driver for Asus OLED display present in some Asus laptops. >> >> The code of this driver is based on 'asusoled' program taken from >> - https://launchpad.net/asusoled/. I just wanted to have a simple >> +<http://lapsus.berlios.de/asus_oled.html>. I just wanted to have a simple >> kernel driver for controlling this device, but I didn't know how >> to do that. Now I know ;) Also, that program can not be used >> with usbhid loaded, which means no USB mouse/keyboard while >> diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c >> index 5b279fb..8c95d8c 100644 >> --- a/drivers/staging/asus_oled/asus_oled.c >> +++ b/drivers/staging/asus_oled/asus_oled.c >> @@ -24,7 +24,7 @@ >> * >> * >> * Asus OLED support is based on asusoled program taken from >> - * https://launchpad.net/asusoled/. >> + *<http://lapsus.berlios.de/asus_oled.html>. >> * >> * >> */ >> diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c >> index ced346a..78b1410 100644 >> --- a/drivers/staging/comedi/drivers/cb_pcimdas.c >> +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c >> @@ -37,7 +37,7 @@ Configuration Options: >> Developed from cb_pcidas and skel by Richard Bytheway (mocelet@xxxxxxxx). >> Only supports DIO, AO and simple AI in it's present form. >> No interrupts, multi channel or FIFO AI, although the card looks like it could support this. >> -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details. >> +See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details. >> */ >> >> #include "../comedidev.h" >> diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c >> index 6af6c83..82be77d 100644 >> --- a/drivers/staging/comedi/drivers/daqboard2000.c >> +++ b/drivers/staging/comedi/drivers/daqboard2000.c >> @@ -50,8 +50,8 @@ Configuration options: >> With some help from our swedish distributor, we got the Windows sourcecode >> for the card, and here are the findings so far. >> >> - 1. A good document that describes the PCI interface chip is found at: >> - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf >> + 1. A good document that describes the PCI interface chip is 9080db-106.pdf >> + available from http://www.plxtech.com/products/io/pci9080 >> >> 2. The initialization done so far is: >> a. program the FPGA (windows code sans a lot of error messages) >> diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c >> index 3acf7e6..1411dd8 100644 >> --- a/drivers/staging/comedi/drivers/ni_labpc.c >> +++ b/drivers/staging/comedi/drivers/ni_labpc.c >> @@ -37,7 +37,7 @@ boards has not >> yet been added to the driver, mainly due to the fact that >> I don't know the device id numbers. If you have one >> of these boards, >> -please file a bug report at https://bugs.comedi.org/ >> +please file a bug report at http://comedi.org/ >> so I can get the necessary information from you. >> >> The 1200 series boards have onboard calibration dacs for correcting >> diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c >> index bd16f91..986ef67 100644 >> --- a/drivers/staging/comedi/drivers/ni_mio_common.c >> +++ b/drivers/staging/comedi/drivers/ni_mio_common.c >> @@ -34,7 +34,7 @@ >> 340747b.pdf AT-MIO E series Register Level Programmer Manual >> 341079b.pdf PCI E Series RLPM >> 340934b.pdf DAQ-STC reference manual >> - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us) >> + 67xx and 611x registers (from ftp://ftp.ni.com/support/daq/mhddk/documentation/) >> release_ni611x.pdf >> release_ni67xx.pdf >> Other possibly relevant info: >> diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h >> index 485d63f..0d254a1 100644 >> --- a/drivers/staging/comedi/drivers/plx9080.h >> +++ b/drivers/staging/comedi/drivers/plx9080.h >> @@ -13,7 +13,7 @@ >> * >> ******************************************************************** >> * >> - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/ >> + * Copyright (C) 1999 RG Studio s.c. >> * Written by Krzysztof Halasa<khc@xxxxxxxxxxxxxxx> >> * >> * Portions (C) SBE Inc., used by permission. >> diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c >> index 0367d2b..a49a7c5 100644 >> --- a/drivers/staging/comedi/drivers/rtd520.c >> +++ b/drivers/staging/comedi/drivers/rtd520.c >> @@ -59,7 +59,7 @@ Configuration options: >> Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf >> Example source: http://www.rtdusa.com/examples/dm/dm7520.zip >> Call them and ask for the register level manual. >> - PCI chip: http://www.plxtech.com/products/toolbox/9080.htm >> + PCI chip: http://www.plxtech.com/products/io/pci9080 >> >> Notes: >> This board is memory mapped. There is some IO stuff, but it isn't needed. >> diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c >> index 6612247..ba8f670 100644 >> --- a/drivers/staging/quickstart/quickstart.c >> +++ b/drivers/staging/quickstart/quickstart.c >> @@ -5,8 +5,7 @@ >> * Copyright (C) 2007-2010 Angelo Arrifano<miknix@xxxxxxxxx> >> * >> * Information gathered from disassebled dsdt and from here: >> - * "http://download.microsoft.com/download/9/c/5/ >> - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc" >> + *<http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx> >> * >> * This program is free software; you can redistribute it and/or modify >> * it under the terms of the GNU General Public License as published by >> diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig >> index 1da73ec..bb44079 100644 >> --- a/drivers/uio/Kconfig >> +++ b/drivers/uio/Kconfig >> @@ -17,9 +17,9 @@ config UIO_CIF >> depends on PCI >> help >> Driver for Hilscher CIF DeviceNet and Profibus cards. This >> - driver requires a userspace component that handles all of the >> - heavy lifting and can be found at: >> - http://www.osadl.org/projects/downloads/UIO/user/cif-* >> + driver requires a userspace component called cif that handles >> + all of the heavy lifting and can be found at: >> + <http://www.osadl.org/projects/downloads/UIO/user/> >> >> To compile this driver as a module, choose M here: the module >> will be called uio_cif. >> diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig >> index 916b2b6..b71e309 100644 >> --- a/drivers/usb/serial/Kconfig >> +++ b/drivers/usb/serial/Kconfig >> @@ -176,7 +176,7 @@ config USB_SERIAL_VISOR >> help >> Say Y here if you want to connect to your HandSpring Visor, Palm >> m500 or m505 through its USB docking station. See >> - <http://usbvisor.sourceforge.net/> for more information on using this >> + <http://usbvisor.sourceforge.net/index.php3> for more information on using this >> driver. >> >> To compile this driver as a module, choose M here: the >> @@ -289,7 +289,7 @@ config USB_SERIAL_KEYSPAN >> and was developed with their support. You must also include >> firmware to support your particular device(s). >> >> - See<http://misc.nu/hugh/keyspan.html> for more information. >> + See<http://blemings.org/hugh/keyspan.html> for more information. >> >> To compile this driver as a module, choose M here: the >> module will be called keyspan. >> diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h >> index 15a4583..28c640d 100644 >> --- a/drivers/usb/serial/ftdi_sio_ids.h >> +++ b/drivers/usb/serial/ftdi_sio_ids.h >> @@ -46,7 +46,7 @@ >> #define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */ >> >> /* OOCDlink by Joern Kaipf<joernk@xxxxxx> >> - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ >> + * (http://www.joernonline.de/) */ >> #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ >> >> /* Luminary Micro Stellaris Boards, VID = FTDI_VID */ >> @@ -335,7 +335,7 @@ >> #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ >> >> /* ACT Solutions HomePro ZWave interface >> - (http://www.act-solutions.com/HomePro.htm) */ >> + (http://www.act-solutions.com/HomePro-Product-Matrix.html) */ >> #define FTDI_ACTZWAVE_PID 0xF2D0 >> >> /* >> @@ -366,7 +366,7 @@ >> #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ >> >> /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ >> -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ >> +/* http://www.usbuirt.com/ */ >> #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ >> >> /* CCS Inc. ICDU/ICDU40 product ID - >> @@ -395,7 +395,7 @@ >> */ >> #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ >> >> -/* Inside Accesso contactless reader (http://www.insidefr.com) */ >> +/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */ >> #define INSIDE_ACCESSO 0xFAD0 >> >> /* >> @@ -634,14 +634,14 @@ >> >> /* >> * JETI SPECTROMETER SPECBOS 1201 >> - * http://www.jeti.com/products/sys/scb/scb1201.php >> + * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101 >> */ >> #define JETI_VID 0x0c6c >> #define JETI_SPC1201_PID 0x04b2 >> >> /* >> * FTDI USB UART chips used in construction projects from the >> - * Elektor Electronics magazine (http://elektor-electronics.co.uk) >> + * Elektor Electronics magazine (http://www.elektor.com/) >> */ >> #define ELEKTOR_VID 0x0C7D >> #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ >> diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c >> index 297163c..0791778 100644 >> --- a/drivers/usb/serial/keyspan.c >> +++ b/drivers/usb/serial/keyspan.c >> @@ -9,7 +9,7 @@ >> the Free Software Foundation; either version 2 of the License, or >> (at your option) any later version. >> >> - See http://misc.nu/hugh/keyspan.html for more information. >> + See http://blemings.org/hugh/keyspan.html for more information. >> >> Code in this driver inspired by and in a number of places taken >> from Brian Warner's original Keyspan-PDA driver. >> diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h >> index bf3297d..2d8baf6 100644 >> --- a/drivers/usb/serial/keyspan.h >> +++ b/drivers/usb/serial/keyspan.h >> @@ -9,7 +9,7 @@ >> the Free Software Foundation; either version 2 of the License, or >> (at your option) any later version. >> >> - See http://misc.nu/hugh/keyspan.html for more information. >> + See http://blemings.org/hugh/keyspan.html for more information. >> >> Code in this driver inspired by and in a number of places taken >> from Brian Warner's original Keyspan-PDA driver. >> diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h >> index 3a3f5e6..d325bb8 100644 >> --- a/drivers/usb/serial/mct_u232.h >> +++ b/drivers/usb/serial/mct_u232.h >> @@ -10,10 +10,9 @@ >> * >> * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No. >> * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin >> - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further >> - * information. The properties of this device are listed at the end of this >> - * file. This device is available from various distributors. I know Hana, >> - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25. >> + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html >> + * for further information. The properties of this device are listed at the end >> + * of this file. This device was used in the Dlink DSB-S25. >> * >> * All of the information about the device was acquired by using SniffUSB >> * on Windows98. The technical details of the reverse engineering are >> @@ -458,7 +457,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, >> * embedded UART. Exhaustive documentation for these is available at: >> * >> * http://www.semiconductors.philips.com/pip/p87c52ubaa >> - * http://www.semiconductors.philips.com/pip/pdiusbd12 >> + * http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf >> * >> * Thanks to Julian Highfield for the pointer to the Philips database. >> * >> diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig >> index 8a372ba..b356e15 100644 >> --- a/drivers/usb/storage/Kconfig >> +++ b/drivers/usb/storage/Kconfig >> @@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB >> depends on USB_STORAGE >> help >> Support for certain Datafab CompactFlash readers. >> - Datafab has a web page at<http://www.datafabusa.com/>. >> + Datafab has a web page at<http://www.datafab.com/>. >> >> If this driver is compiled as a module, it will be named ums-datafab. >> >> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig >> index 8b31fdf..dc06ff1 100644 >> --- a/drivers/video/Kconfig >> +++ b/drivers/video/Kconfig >> @@ -49,7 +49,7 @@ menuconfig FB >> You need an utility program called fbset to make full use of frame >> buffer devices. Please read<file:Documentation/fb/framebuffer.txt> >> and the Framebuffer-HOWTO at >> - <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more >> + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more >> information. >> >> Say Y here and to the driver for your graphics board below if you >> @@ -955,7 +955,7 @@ config FB_EPSON1355 >> Build in support for the SED1355 Epson Research Embedded RAMDAC >> LCD/CRT Controller (since redesignated as the S1D13505) as a >> framebuffer. Product specs at >> - <http://www.erd.epson.com/vdc/html/products.htm>. >> + <http://vdc.epson.com/>. >> >> config FB_S1D13XXX >> tristate "Epson S1D13XXX framebuffer support" >> @@ -966,7 +966,7 @@ config FB_S1D13XXX >> help >> Support for S1D13XXX framebuffer device family (currently only >> working with S1D13806). Product specs at >> - <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> >> + <http://vdc.epson.com/> >> >> config FB_ATMEL >> tristate "AT91/AT32 LCD Controller support" >> @@ -1323,7 +1323,7 @@ config FB_RADEON >> don't need to choose this to run the Radeon in plain VGA mode. >> >> There is a product page at >> - http://apps.ati.com/ATIcompare/ >> + http://products.amd.com/en-us/GraphicCardResult.aspx >> >> config FB_RADEON_I2C >> bool "DDC/I2C for ATI Radeon support" >> @@ -1395,7 +1395,7 @@ config FB_ATY_CT >> Say Y here to support use of ATI's 64-bit Rage boards (or other >> boards based on the Mach64 CT, VT, GT, and LT chipsets) as a >> framebuffer device. The ATI product support page for these boards >> - is at<http://support.ati.com/products/pc/mach64/>. >> + is at<http://support.ati.com/products/pc/mach64/mach64.html>. >> >> config FB_ATY_GENERIC_LCD >> bool "Mach64 generic LCD support (EXPERIMENTAL)" >> diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c >> index f3d7440..3ec4923 100644 >> --- a/drivers/video/arcfb.c >> +++ b/drivers/video/arcfb.c >> @@ -2,7 +2,6 @@ >> * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board >> * >> * Copyright (C) 2005, Jaya Kumar<jayalk@xxxxxxxxxxxx> >> - * http://www.intworks.biz/arclcd >> * >> * This file is subject to the terms and conditions of the GNU General Public >> * License. See the file COPYING in the main directory of this archive for >> diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c >> index db9713b..a268cbf 100644 >> --- a/drivers/video/epson1355fb.c >> +++ b/drivers/video/epson1355fb.c >> @@ -4,7 +4,7 @@ >> * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller >> * (previously known as SED1355) >> * >> - * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html >> + * Cf. http://vdc.epson.com/ >> * >> * >> * Copyright (C) Hewlett-Packard Company. All rights reserved. >> diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c >> index 7293eac..7cb715d 100644 >> --- a/drivers/video/fbcvt.c >> +++ b/drivers/video/fbcvt.c >> @@ -5,7 +5,7 @@ >> * >> * Based from the VESA(TM) Coordinated Video Timing Generator by >> * Graham Loveridge April 9, 2003 available at >> - * http://www.vesa.org/public/CVT/CVTd6r1.xls >> + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls >> * >> * This file is subject to the terms and conditions of the GNU General Public >> * License. See the file COPYING in the main directory of this archive >> diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c >> index c77bcc6..e225c00 100644 >> --- a/drivers/video/hecubafb.c >> +++ b/drivers/video/hecubafb.c >> @@ -10,7 +10,7 @@ >> * >> * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. >> * This work was possible because of apollo display code from E-Ink's website >> - * http://support.eink.com/community >> + * http://eink.com/ >> * All information used to write this code is from public material made >> * available by E-Ink on its support site. Some commands such as 0xA4 >> * were found by looping through cmd=0x00 thru 0xFF and supplying random >> diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c >> index 9b3d6e4..63ed3b7 100644 >> --- a/drivers/video/metronomefb.c >> +++ b/drivers/video/metronomefb.c >> @@ -10,7 +10,7 @@ >> * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. >> * >> * This work was made possible by help and equipment support from E-Ink >> - * Corporation. http://support.eink.com/community >> + * Corporation. http://www.eink.com/ >> * >> * This driver is written to be used with the Metronome display controller. >> * It is intended to be architecture independent. A board specific driver >> diff --git a/firmware/keyspan_pda/keyspan_pda.S b/firmware/keyspan_pda/keyspan_pda.S >> index 418fe69..f3acc19 100644 >> --- a/firmware/keyspan_pda/keyspan_pda.S >> +++ b/firmware/keyspan_pda/keyspan_pda.S >> @@ -74,7 +74,7 @@ >> * recognizes the new device ID and glues it to the real serial driver code. >> * >> * USEFUL DOCS: >> - * EzUSB Technical Reference Manual:<http://www.anchorchips.com> >> + * EzUSB Technical Reference Manual:<http://www.cypress.com/> >> * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is >> * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports >> * use totally different registers! >> diff --git a/firmware/keyspan_pda/xircom_pgs.S b/firmware/keyspan_pda/xircom_pgs.S >> index 05d99dd..0b79bbf 100644 >> --- a/firmware/keyspan_pda/xircom_pgs.S >> +++ b/firmware/keyspan_pda/xircom_pgs.S >> @@ -74,7 +74,7 @@ >> * recognizes the new device ID and glues it to the real serial driver code. >> * >> * USEFUL DOCS: >> - * EzUSB Technical Reference Manual:<http://www.anchorchips.com> >> + * EzUSB Technical Reference Manual:<http://www.cypress.com/> >> * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is >> * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports >> * use totally different registers! >> diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h >> index 6bbd75c..7c232c1 100644 >> --- a/fs/hostfs/hostfs.h >> +++ b/fs/hostfs/hostfs.h >> @@ -28,12 +28,7 @@ >> * #define ATTR_KILL_SUID 2048 >> * #define ATTR_KILL_SGID 4096 >> * >> - * and this is because they were added in 2.5 development in this patch: >> - * >> - * http://linux.bkbits.net:8080/linux-2.5/ >> - * cset@3caf4a12k4XgDzK7wyK-TGpSZ9u2Ww?nav=index.html >> - * |src/.|src/include|src/include/linux|related/include/linux/fs.h >> - * >> + * and this is because they were added in 2.5 development. >> * Actually, they are not needed by most ->setattr() methods - they are set by >> * callers of notify_change() to notify that the setuid/setgid bits must be >> * dropped. >> diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c >> index 5bf8a04..789c625 100644 >> --- a/fs/partitions/ldm.c >> +++ b/fs/partitions/ldm.c >> @@ -5,7 +5,7 @@ >> * Copyright (c) 2001-2007 Anton Altaparmakov >> * Copyright (C) 2001,2002 Jakob Kemi<jakob.kemi@xxxxxxxxx> >> * >> - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/ >> + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads >> * >> * This program is free software; you can redistribute it and/or modify it under >> * the terms of the GNU General Public License as published by the Free Software >> diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h >> index d1fb50b..374242c 100644 >> --- a/fs/partitions/ldm.h >> +++ b/fs/partitions/ldm.h >> @@ -5,7 +5,7 @@ >> * Copyright (c) 2001-2007 Anton Altaparmakov >> * Copyright (C) 2001,2002 Jakob Kemi<jakob.kemi@xxxxxxxxx> >> * >> - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/ >> + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads >> * >> * This program is free software; you can redistribute it and/or modify it >> * under the terms of the GNU General Public License as published by the Free >> diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig >> index 513f431..7cd4666 100644 >> --- a/fs/reiserfs/Kconfig >> +++ b/fs/reiserfs/Kconfig >> @@ -10,7 +10,8 @@ config REISERFS_FS >> >> In general, ReiserFS is as fast as ext2, but is very efficient with >> large directories and small files. Additional patches are needed >> - for NFS and quotas, please see<http://www.namesys.com/> for links. >> + for NFS and quotas, please see >> + <https://reiser4.wiki.kernel.org/index.php/Main_Page> for links. >> >> It is more easily extended to have features currently found in >> database and keyword search systems than block allocation based file >> @@ -18,7 +19,8 @@ config REISERFS_FS >> plugins consistent with our motto ``It takes more than a license to >> make source code open.'' >> >> - Read<http://www.namesys.com/> to learn more about reiserfs. >> + Read<https://reiser4.wiki.kernel.org/index.php/Main_Page> >> + to learn more about reiserfs. >> >> Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. >> >> diff --git a/fs/reiserfs/README b/fs/reiserfs/README >> index 14e8c9d..e2f7a26 100644 >> --- a/fs/reiserfs/README >> +++ b/fs/reiserfs/README >> @@ -43,7 +43,7 @@ to address the fair crediting issue in the next GPL version.) >> [END LICENSING] >> >> Reiserfs is a file system based on balanced tree algorithms, which is >> -described at http://devlinux.com/namesys. >> +described at https://reiser4.wiki.kernel.org/index.php/Main_Page >> >> Stop reading here. Go there, then return. >> >> diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h >> index 4086b8e..da2530e 100644 >> --- a/include/crypto/gf128mul.h >> +++ b/include/crypto/gf128mul.h >> @@ -54,8 +54,8 @@ >> >> /* Comment by Rik: >> * >> - * For some background on GF(2^128) see for example: http://- >> - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf >> + * For some background on GF(2^128) see for example: >> + * http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf >> * >> * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can >> * be mapped to computer memory in a variety of ways. Let's examine >> diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h >> index c2eeb63..61ce641 100644 >> --- a/include/linux/fdreg.h >> +++ b/include/linux/fdreg.h >> @@ -89,7 +89,7 @@ >> /* the following commands are new in the 82078. They are not used in the >> * floppy driver, except the first three. These commands may be useful for apps >> * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at >> - * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */ >> + * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */ >> >> #define FD_PARTID 0x18 /* part id ("extended" version cmd) */ >> #define FD_SAVE 0x2e /* save fdc regs for later restore */ >> diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h >> index 3e659ec..7d95847 100644 >> --- a/include/linux/if_infiniband.h >> +++ b/include/linux/if_infiniband.h >> @@ -5,7 +5,7 @@ >> *<http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD >> * license, available in the LICENSE.TXT file accompanying this >> * software. These details are also available at >> - *<http://openib.org/license.html>. >> + *<http://www.openfabrics.org/software_license.htm>. >> * >> * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF >> diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h >> index de24af7..54b8e0d 100644 >> --- a/include/linux/n_r3964.h >> +++ b/include/linux/n_r3964.h >> @@ -4,7 +4,6 @@ >> * Copyright by >> * Philips Automation Projects >> * Kassel (Germany) >> - * http://www.pap-philips.de >> * ----------------------------------------------------------- >> * This software may be used and distributed according to the terms of >> * the GNU General Public License, incorporated herein by reference. >> diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig >> index 2a72aa9..705e53e 100644 >> --- a/net/ax25/Kconfig >> +++ b/net/ax25/Kconfig >> @@ -7,7 +7,7 @@ menuconfig HAMRADIO >> bool "Amateur Radio support" >> help >> If you want to connect your Linux box to an amateur radio, answer Y >> - here. You want to read<http://www.tapr.org/tapr/html/pkthome.html> >> + here. You want to read<http://www.tapr.org/> >> and more specifically about AX.25 on Linux >> <http://www.linux-ax25.org/>. >> >> @@ -42,7 +42,7 @@ config AX25 >> check out the file<file:Documentation/networking/ax25.txt> in the >> kernel source. More information about digital amateur radio in >> general is on the WWW at >> - <http://www.tapr.org/tapr/html/pkthome.html>. >> + <http://www.tapr.org/>. >> >> To compile this driver as a module, choose M here: the >> module will be called ax25. >> @@ -89,7 +89,7 @@ config NETROM >> <http://www.linux-ax25.org>. You also might want to check out the >> file<file:Documentation/networking/ax25.txt>. More information about >> digital amateur radio in general is on the WWW at >> - <http://www.tapr.org/tapr/html/pkthome.html>. >> + <http://www.tapr.org/>. >> >> To compile this driver as a module, choose M here: the >> module will be called netrom. >> @@ -108,7 +108,7 @@ config ROSE >> <http://www.linux-ax25.org>. You also might want to check out the >> file<file:Documentation/networking/ax25.txt>. More information about >> digital amateur radio in general is on the WWW at >> - <http://www.tapr.org/tapr/html/pkthome.html>. >> + <http://www.tapr.org/>. >> >> To compile this driver as a module, choose M here: the >> module will be called rose. >> diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig >> index 571f895..4123d5b 100644 >> --- a/net/ipv4/Kconfig >> +++ b/net/ipv4/Kconfig >> @@ -84,7 +84,7 @@ config IP_FIB_TRIE >> >> An experimental study of compression methods for dynamic tries >> Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. >> - http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ >> + <http://www.csc.kth.se/~snilsson/software/dyntrie2/> >> >> endchoice >> >> @@ -555,7 +555,7 @@ config TCP_CONG_VENO >> distinguishing to circumvent the difficult judgment of the packet loss >> type. TCP Veno cuts down less congestion window in response to random >> loss packets. >> - See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf >> + See<http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186> >> >> config TCP_CONG_YEAH >> tristate "YeAH TCP" >> diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c >> index 3a92a76..094e150 100644 >> --- a/net/ipv4/cipso_ipv4.c >> +++ b/net/ipv4/cipso_ipv4.c >> @@ -9,7 +9,7 @@ >> * >> * The CIPSO draft specification can be found in the kernel's Documentation >> * directory as well as the following URL: >> - * http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt >> + * http://tools.ietf.org/id/draft-ietf-cipso-ipsecurity-01.txt >> * The FIPS-188 specification can be found at the following URL: >> * http://www.itl.nist.gov/fipspubs/fip188.htm >> * >> diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c >> index 4a8e370..d9818c5 100644 >> --- a/net/ipv4/fib_trie.c >> +++ b/net/ipv4/fib_trie.c >> @@ -16,7 +16,7 @@ >> * >> * An experimental study of compression methods for dynamic tries >> * Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. >> - * http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ >> + * http://www.csc.kth.se/~snilsson/software/dyntrie2/ >> * >> * >> * IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson >> diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig >> index 1833bdb..d048275 100644 >> --- a/net/ipv4/netfilter/Kconfig >> +++ b/net/ipv4/netfilter/Kconfig >> @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG >> which can only be viewed through syslog. >> >> The appropriate userspace logging daemon (ulogd) may be obtained from >> - <http://www.gnumonks.org/projects/ulogd/> >> + <http://www.netfilter.org/projects/ulogd/index.html> >> >> To compile it as a module, choose M here. If unsure, say N. >> >> diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c >> index 1eba160..00ca688 100644 >> --- a/net/ipv4/tcp_illinois.c >> +++ b/net/ipv4/tcp_illinois.c >> @@ -6,7 +6,7 @@ >> * The algorithm is described in: >> * "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm >> * for High-Speed Networks" >> - * http://www.ews.uiuc.edu/~shaoliu/papersandslides/liubassri06perf.pdf >> + * http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf >> * >> * Implemented from description in paper and ns-2 simulation. >> * Copyright (C) 2007 Stephen Hemminger<shemminger@xxxxxxxxxxxxxxxxxxxx> >> diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c >> index e663b78..bccce34 100644 >> --- a/net/ipv4/tcp_input.c >> +++ b/net/ipv4/tcp_input.c >> @@ -428,10 +428,10 @@ EXPORT_SYMBOL(tcp_initialize_rcv_mss); >> * >> * The algorithm for RTT estimation w/o timestamps is based on >> * Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL. >> - *<http://www.lanl.gov/radiant/website/pubs/drs/lacsi2001.ps> >> + *<http://public.lanl.gov/radiant/pubs.html#DRS> >> * >> * More detail on this code can be found at >> - *<http://www.psc.edu/~jheffner/senior_thesis.ps>, >> + *<http://staff.psc.edu/jheffner/>, >> * though this reference is out of date. A new paper >> * is pending. >> */ >> diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c >> index b612acf..38bc0b5 100644 >> --- a/net/ipv4/tcp_veno.c >> +++ b/net/ipv4/tcp_veno.c >> @@ -6,7 +6,7 @@ >> * "TCP Veno: TCP Enhancement for Transmission over Wireless Access Networks." >> * IEEE Journal on Selected Areas in Communication, >> * Feb. 2003. >> - * See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf >> + * See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf >> */ >> >> #include<linux/mm.h> >> diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c >> index c4c885d..3fb2b73 100644 >> --- a/net/netfilter/nf_conntrack_proto_tcp.c >> +++ b/net/netfilter/nf_conntrack_proto_tcp.c >> @@ -329,8 +329,8 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph) >> /* TCP connection tracking based on 'Real Stateful TCP Packet Filtering >> in IP Filter' by Guido van Rooij. >> >> - http://www.nluug.nl/events/sane2000/papers.html >> - http://www.iae.nl/users/guido/papers/tcp_filtering.ps.gz >> + http://www.sane.nl/events/sane2000/papers.html >> + http://www.darkart.com/mirrors/www.obfuscation.org/ipf/ >> >> The boundaries and the conditions are changed according to RFC793: >> the packet must intersect the window (i.e. segments may be >> diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c >> index 456a1b4..854c303 100644 >> --- a/sound/oss/ac97_codec.c >> +++ b/sound/oss/ac97_codec.c >> @@ -21,11 +21,8 @@ >> * >> ************************************************************************** >> * >> - * The Intel Audio Codec '97 specification is available at the Intel >> - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/ >> - * >> - * The specification itself is currently available at: >> - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf >> + * The Intel Audio Codec '97 specification is available at: >> + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf >> * >> ************************************************************************** >> * >> diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c >> index c7fba53..537cfba 100644 >> --- a/sound/pci/ens1370.c >> +++ b/sound/pci/ens1370.c >> @@ -22,7 +22,7 @@ >> /* Power-Management-Code ( CONFIG_PM ) >> * for ens1371 only ( FIXME ) >> * derived from cs4281.c, atiixp.c and via82xx.c >> - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm >> + * using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/ >> * by Kurt J. Bosch >> */ >> >> diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c >> index 4677492..400f9eb 100644 >> --- a/sound/pci/intel8x0.c >> +++ b/sound/pci/intel8x0.c >> @@ -716,7 +716,7 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich >> * Intel 82443MX running a 100MHz processor system bus has a hardware bug, >> * which aborts PCI busmaster for audio transfer. A workaround is to set >> * the pages as non-cached. For details, see the errata in >> - * http://www.intel.com/design/chipsets/specupdt/245051.htm >> + * http://download.intel.com/design/chipsets/specupdt/24505108.pdf >> */ >> static void fill_nocache(void *buf, int size, int nocache) >> { _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
