Dne Po 30. srpna 2010 10:28:07 Vasily Khoruzhick napsal(a):
> Disable some codec modules in standby mode, completely disable
> codec in off mode to save some power.
> Fix suspend/resume: mark mixer regs as dirty on resume to
> restore mixer values, otherwise driver produces no sound
> (master is muted by default).
>
> Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
Please have my:
Acked-by: Marek Vasut <marek.vasut@xxxxxxxxx>
> ---
> sound/soc/codecs/uda1380.c | 145
> ++++++++++++++++++++++++++++++++------------ 1 files changed, 105
> insertions(+), 40 deletions(-)
>
> diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c
> index 1a51c81..488f801 100644
> --- a/sound/soc/codecs/uda1380.c
> +++ b/sound/soc/codecs/uda1380.c
> @@ -39,6 +39,7 @@ struct uda1380_priv {
> u16 reg_cache[UDA1380_CACHEREGNUM];
> unsigned int dac_clk;
> struct work_struct work;
> + void *control_data;
> };
>
> /*
> @@ -129,7 +130,46 @@ static int uda1380_write(struct snd_soc_codec *codec,
> unsigned int reg, return -EIO;
> }
>
> -#define uda1380_reset(c) uda1380_write(c, UDA1380_RESET, 0)
> +static void uda1380_sync_cache(struct snd_soc_codec *codec)
> +{
> + int reg;
> + u8 data[3];
> + u16 *cache = codec->reg_cache;
> +
> + /* Sync reg_cache with the hardware */
> + for (reg = 0; reg < UDA1380_MVOL; reg++) {
> + data[0] = reg;
> + data[1] = (cache[reg] & 0xff00) >> 8;
> + data[2] = cache[reg] & 0x00ff;
> + if (codec->hw_write(codec->control_data, data, 3) != 3)
> + dev_err(codec->dev, "%s: write to reg 0x%x failed\n",
> + __func__, reg);
> + }
> +}
> +
> +static int uda1380_reset(struct snd_soc_codec *codec)
> +{
> + struct uda1380_platform_data *pdata = codec->dev->platform_data;
> +
> + if (gpio_is_valid(pdata->gpio_reset)) {
> + gpio_set_value(pdata->gpio_reset, 1);
> + mdelay(1);
> + gpio_set_value(pdata->gpio_reset, 0);
> + } else {
> + u8 data[3];
> +
> + data[0] = UDA1380_RESET;
> + data[1] = 0;
> + data[2] = 0;
> +
> + if (codec->hw_write(codec->control_data, data, 3) != 3) {
> + dev_err(codec->dev, "%s: failed\n", __func__);
> + return -EIO;
> + }
> + }
> +
> + return 0;
> +}
>
> static void uda1380_flush_work(struct work_struct *work)
> {
> @@ -560,18 +600,40 @@ static int uda1380_set_bias_level(struct
> snd_soc_codec *codec, enum snd_soc_bias_level level)
> {
> int pm = uda1380_read_reg_cache(codec, UDA1380_PM);
> + int reg;
> + struct uda1380_platform_data *pdata = codec->dev->platform_data;
> +
> + if (codec->bias_level == level)
> + return 0;
>
> switch (level) {
> case SND_SOC_BIAS_ON:
> case SND_SOC_BIAS_PREPARE:
> + /* ADC, DAC on */
> uda1380_write(codec, UDA1380_PM, R02_PON_BIAS | pm);
> break;
> case SND_SOC_BIAS_STANDBY:
> - uda1380_write(codec, UDA1380_PM, R02_PON_BIAS);
> - break;
> - case SND_SOC_BIAS_OFF:
> + if (codec->bias_level == SND_SOC_BIAS_OFF) {
> + if (gpio_is_valid(pdata->gpio_power)) {
> + gpio_set_value(pdata->gpio_power, 1);
> + uda1380_reset(codec);
> + }
> +
> + uda1380_sync_cache(codec);
> + }
> uda1380_write(codec, UDA1380_PM, 0x0);
> break;
> + case SND_SOC_BIAS_OFF:
> + if (!gpio_is_valid(pdata->gpio_power))
> + break;
> +
> + gpio_set_value(pdata->gpio_power, 0);
> +
> + /* Mark mixer regs cache dirty to sync them with
> + * codec regs on power on.
> + */
> + for (reg = UDA1380_MVOL; reg < UDA1380_CACHEREGNUM; reg++)
> + set_bit(reg - 0x10, &uda1380_cache_dirty);
> }
> codec->bias_level = level;
> return 0;
> @@ -651,16 +713,6 @@ static int uda1380_suspend(struct snd_soc_codec
> *codec, pm_message_t state)
>
> static int uda1380_resume(struct snd_soc_codec *codec)
> {
> - int i;
> - u8 data[2];
> - u16 *cache = codec->reg_cache;
> -
> - /* Sync reg_cache with the hardware */
> - for (i = 0; i < ARRAY_SIZE(uda1380_reg); i++) {
> - data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
> - data[1] = cache[i] & 0x00ff;
> - codec->hw_write(codec->control_data, data, 2);
> - }
> uda1380_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
> return 0;
> }
> @@ -671,29 +723,36 @@ static int uda1380_probe(struct snd_soc_codec *codec)
> struct uda1380_priv *uda1380 = snd_soc_codec_get_drvdata(codec);
> int ret;
>
> + uda1380->codec = codec;
> +
> codec->hw_write = (hw_write_t)i2c_master_send;
> + codec->control_data = uda1380->control_data;
>
> - if (!pdata || !pdata->gpio_power || !pdata->gpio_reset)
> + if (!pdata)
> return -EINVAL;
>
> - ret = gpio_request(pdata->gpio_power, "uda1380 power");
> - if (ret)
> - return ret;
> - ret = gpio_request(pdata->gpio_reset, "uda1380 reset");
> - if (ret)
> - goto err_gpio;
> -
> - gpio_direction_output(pdata->gpio_power, 1);
> -
> - /* we may need to have the clock running here - pH5 */
> - gpio_direction_output(pdata->gpio_reset, 1);
> - udelay(5);
> - gpio_set_value(pdata->gpio_reset, 0);
> + if (gpio_is_valid(pdata->gpio_reset)) {
> + ret = gpio_request(pdata->gpio_reset, "uda1380 reset");
> + if (ret)
> + goto err_out;
> + ret = gpio_direction_output(pdata->gpio_reset, 0);
> + if (ret)
> + goto err_gpio_reset_conf;
> + }
>
> - ret = uda1380_reset(codec);
> - if (ret < 0) {
> - dev_err(codec->dev, "Failed to issue reset\n");
> - goto err_reset;
> + if (gpio_is_valid(pdata->gpio_power)) {
> + ret = gpio_request(pdata->gpio_power, "uda1380 power");
> + if (ret)
> + goto err_gpio;
> + ret = gpio_direction_output(pdata->gpio_power, 0);
> + if (ret)
> + goto err_gpio_power_conf;
> + } else {
> + ret = uda1380_reset(codec);
> + if (ret) {
> + dev_err(codec->dev, "Failed to issue reset\n");
> + goto err_reset;
> + }
> }
>
> INIT_WORK(&uda1380->work, uda1380_flush_work);
> @@ -703,10 +762,11 @@ static int uda1380_probe(struct snd_soc_codec *codec)
> /* set clock input */
> switch (pdata->dac_clk) {
> case UDA1380_DAC_CLK_SYSCLK:
> - uda1380_write(codec, UDA1380_CLK, 0);
> + uda1380_write_reg_cache(codec, UDA1380_CLK, 0);
> break;
> case UDA1380_DAC_CLK_WSPLL:
> - uda1380_write(codec, UDA1380_CLK, R00_DAC_CLK);
> + uda1380_write_reg_cache(codec, UDA1380_CLK,
> + R00_DAC_CLK);
> break;
> }
>
> @@ -717,10 +777,15 @@ static int uda1380_probe(struct snd_soc_codec *codec)
> return 0;
>
> err_reset:
> - gpio_set_value(pdata->gpio_power, 0);
> - gpio_free(pdata->gpio_reset);
> +err_gpio_power_conf:
> + if (gpio_is_valid(pdata->gpio_power))
> + gpio_free(pdata->gpio_power);
> +
> +err_gpio_reset_conf:
> err_gpio:
> - gpio_free(pdata->gpio_power);
> + if (gpio_is_valid(pdata->gpio_reset))
> + gpio_free(pdata->gpio_reset);
> +err_out:
> return ret;
> }
>
> @@ -731,7 +796,6 @@ static int uda1380_remove(struct snd_soc_codec *codec)
>
> uda1380_set_bias_level(codec, SND_SOC_BIAS_OFF);
>
> - gpio_set_value(pdata->gpio_power, 0);
> gpio_free(pdata->gpio_reset);
> gpio_free(pdata->gpio_power);
>
> @@ -743,8 +807,8 @@ static struct snd_soc_codec_driver
> soc_codec_dev_uda1380 = { .remove = uda1380_remove,
> .suspend = uda1380_suspend,
> .resume = uda1380_resume,
> - .read = uda1380_read_reg_cache,
> - .write = uda1380_write,
> + .read = uda1380_read_reg_cache,
> + .write = uda1380_write,
> .set_bias_level = uda1380_set_bias_level,
> .reg_cache_size = ARRAY_SIZE(uda1380_reg),
> .reg_word_size = sizeof(u16),
> @@ -764,6 +828,7 @@ static __devinit int uda1380_i2c_probe(struct
> i2c_client *i2c, return -ENOMEM;
>
> i2c_set_clientdata(i2c, uda1380);
> + uda1380->control_data = i2c;
>
> ret = snd_soc_register_codec(&i2c->dev,
> &soc_codec_dev_uda1380, uda1380_dai,
ARRAY_SIZE(uda1380_dai));
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
