Dne Ne 29. srpna 2010 20:53:46 Vasily Khoruzhick napsal(a):
> Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> ---
> sound/soc/s3c24xx/Kconfig | 8 +
> sound/soc/s3c24xx/Makefile | 2 +
> sound/soc/s3c24xx/rx1950_uda1380.c | 335
> ++++++++++++++++++++++++++++++++++++ 3 files changed, 345 insertions(+), 0
> deletions(-)
> create mode 100644 sound/soc/s3c24xx/rx1950_uda1380.c
>
> diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
> index 1cdc37bd..7d8235d 100644
> --- a/sound/soc/s3c24xx/Kconfig
> +++ b/sound/soc/s3c24xx/Kconfig
> @@ -118,6 +118,14 @@ config SND_S3C24XX_SOC_SIMTEC_HERMES
> select SND_SOC_TLV320AIC3X
> select SND_S3C24XX_SOC_SIMTEC
>
> +config SND_S3C24XX_SOC_RX1950_UDA1380
> + tristate "Audio support for the HP iPAQ RX1950"
> + depends on SND_S3C24XX_SOC && MACH_RX1950
> + select SND_S3C24XX_SOC_I2S
> + select SND_SOC_UDA1380
> + help
> + This driver provides audio support for HP iPAQ RX1950 PDA.
> +
> config SND_SOC_SMDK_WM9713
> tristate "SoC AC97 Audio support for SMDK with WM9713"
> depends on SND_S3C24XX_SOC && (MACH_SMDK6410 || MACH_SMDKC100 ||
> MACH_SMDKV210 || MACH_SMDKC110) diff --git a/sound/soc/s3c24xx/Makefile
> b/sound/soc/s3c24xx/Makefile index 47ed6d7..dd412a9 100644
> --- a/sound/soc/s3c24xx/Makefile
> +++ b/sound/soc/s3c24xx/Makefile
> @@ -27,6 +27,7 @@ snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
> snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o
> snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
> snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
> +snd-soc-rx1950-uda1380-objs := rx1950_uda1380.o
> snd-soc-smdk64xx-wm8580-objs := smdk64xx_wm8580.o
> snd-soc-smdk-wm9713-objs := smdk_wm9713.o
> snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
> @@ -42,6 +43,7 @@ obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) +=
> snd-soc-s3c24xx-uda134x.o obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC) +=
> snd-soc-s3c24xx-simtec.o
> obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES) +=
> snd-soc-s3c24xx-simtec-hermes.o
> obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) +=
> snd-soc-s3c24xx-simtec-tlv320aic23.o
> +obj-$(CONFIG_SND_S3C24XX_SOC_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o
> obj-$(CONFIG_SND_S3C64XX_SOC_WM8580) += snd-soc-smdk64xx-wm8580.o
> obj-$(CONFIG_SND_SOC_SMDK_WM9713) += snd-soc-smdk-wm9713.o
> obj-$(CONFIG_SND_S3C64XX_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
> diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c
> b/sound/soc/s3c24xx/rx1950_uda1380.c new file mode 100644
> index 0000000..2a16113
> --- /dev/null
> +++ b/sound/soc/s3c24xx/rx1950_uda1380.c
> @@ -0,0 +1,335 @@
> +/*
> + * rx1950.c -- ALSA Soc Audio Layer
> + *
> + * Copyright (c) 2010 Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> + *
> + * Based on smdk2440.c and magician.c
> + *
> + * Authors: Graeme Gregory graeme.gregory@xxxxxxxxxxxxxxxx
> + * Philipp Zabel <philipp.zabel@xxxxxxxxx>
> + * Denis Grigoriev <dgreenday@xxxxxxxxx>
> + * Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> it + * under the terms of the GNU General Public License as published
> by the + * Free Software Foundation; either version 2 of the License,
> or (at your + * option) any later version.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/timer.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +#include <linux/i2c.h>
> +#include <linux/gpio.h>
> +#include <linux/clk.h>
> +
> +#include <sound/core.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dapm.h>
> +#include <sound/uda1380.h>
> +#include <sound/jack.h>
> +
> +#include <plat/regs-iis.h>
> +
> +#include <mach/regs-clock.h>
> +
> +#include "s3c-dma.h"
> +#include "s3c24xx-i2s.h"
> +#include "../codecs/uda1380.h"
> +
> +static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd);
> +static int rx1950_startup(struct snd_pcm_substream *substream);
> +static int rx1950_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params);
> +static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
> + struct snd_kcontrol *kcontrol, int event);
> +
> +static unsigned int rates[] = {
> + 16000,
> + 44100,
> + 48000,
> + 88200,
> +};
> +
> +static struct snd_pcm_hw_constraint_list hw_rates = {
> + .count = ARRAY_SIZE(rates),
> + .list = rates,
> + .mask = 0,
> +};
> +
> +static struct snd_soc_jack hp_jack;
> +
> +static struct snd_soc_jack_pin hp_jack_pins[] = {
> + {
> + .pin = "Headphone Jack",
> + .mask = SND_JACK_HEADPHONE,
> + },
> + {
> + .pin = "Speaker",
> + .mask = SND_JACK_HEADPHONE,
> + .invert = 1,
> + },
> +};
> +
> +static struct snd_soc_jack_gpio hp_jack_gpios[] = {
> + [0] = {
> + .gpio = S3C2410_GPG(12),
> + .name = "hp-gpio",
> + .report = SND_JACK_HEADPHONE,
> + .invert = 1,
> + .debounce_time = 200,
> + },
> +};
> +
> +static struct snd_soc_ops rx1950_ops = {
> + .startup = rx1950_startup,
> + .hw_params = rx1950_hw_params,
> +};
> +
> +/* s3c24xx digital audio interface glue - connects codec <--> CPU */
> +static struct snd_soc_dai_link rx1950_uda1380_dai[] = {
> + {
> + .name = "uda1380",
> + .stream_name = "UDA1380 Duplex",
> + .cpu_dai_name = "s3c24xx-iis",
> + .codec_dai_name = "uda1380-hifi",
> + .init = rx1950_uda1380_init,
> + .platform_name = "s3c24xx-pcm-audio",
> + .codec_name = "uda1380-codec.0-001a",
> + .ops = &rx1950_ops,
> + },
> +};
> +
> +static struct snd_soc_card rx1950_asoc = {
> + .name = "rx1950",
> + .dai_link = rx1950_uda1380_dai,
> + .num_links = ARRAY_SIZE(rx1950_uda1380_dai),
> +};
> +
> +/* rx1950 machine dapm widgets */
> +static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = {
> + SND_SOC_DAPM_HP("Headphone Jack", NULL),
> + SND_SOC_DAPM_MIC("Mic Jack", NULL),
> + SND_SOC_DAPM_SPK("Speaker", rx1950_spk_power),
> +};
> +
> +/* rx1950 machine audio_map */
> +static const struct snd_soc_dapm_route audio_map[] = {
> + /* headphone connected to VOUTLHP, VOUTRHP */
> + {"Headphone Jack", NULL, "VOUTLHP"},
> + {"Headphone Jack", NULL, "VOUTRHP"},
> +
> + /* ext speaker connected to VOUTL, VOUTR */
> + {"Speaker", NULL, "VOUTL"},
> + {"Speaker", NULL, "VOUTR"},
> +
> + /* mic is connected to VINM */
> + {"VINM", NULL, "Mic Jack"},
> +};
> +
> +static struct platform_device *s3c24xx_snd_device;
> +static struct clk *xtal;
> +
> +static int rx1950_startup(struct snd_pcm_substream *substream)
> +{
> + struct snd_pcm_runtime *runtime = substream->runtime;
> +
> + runtime->hw.rate_min = hw_rates.list[0];
> + runtime->hw.rate_max = hw_rates.list[hw_rates.count - 1];
> + runtime->hw.rates = SNDRV_PCM_RATE_KNOT;
> +
> + return snd_pcm_hw_constraint_list(runtime, 0,
> + SNDRV_PCM_HW_PARAM_RATE,
> + &hw_rates);
> +}
> +
> +static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
> + struct snd_kcontrol *kcontrol, int event)
> +{
> + if (SND_SOC_DAPM_EVENT_ON(event))
> + gpio_set_value(S3C2410_GPA(1), 1);
> + else
> + gpio_set_value(S3C2410_GPA(1), 0);
> +
> + return 0;
> +}
> +
> +static int rx1950_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
> + struct snd_soc_dai *codec_dai = rtd->codec_dai;
> + int div;
> + int ret;
> + unsigned int rate = params_rate(params);
> + int clk_source, fs_mode;
> +
> + switch (rate) {
> + case 16000:
> + case 48000:
> + clk_source = S3C24XX_CLKSRC_PCLK;
> + fs_mode = S3C2410_IISMOD_384FS;
> + div = s3c24xx_i2s_get_clockrate() / (384 * rate);
> + if (s3c24xx_i2s_get_clockrate() % (384 * rate) > (182 * rate))
> + div++;
> + break;
> + case 44100:
> + case 88200:
> + clk_source = S3C24XX_CLKSRC_MPLL;
> + fs_mode = S3C2410_IISMOD_256FS;
> + div = clk_get_rate(xtal) / (256 * rate);
> + if (clk_get_rate(xtal) % (256 * rate) > (128 * rate))
> + div++;
> + break;
> + default:
> + printk(KERN_ERR "%s: rate %d is not supported\n",
> + __func__, rate);
> + return -EINVAL;
> + }
> +
> + /* set codec DAI configuration */
> + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
> + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
> + if (ret < 0)
> + return ret;
> +
> + /* set cpu DAI configuration */
> + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
> + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
> + if (ret < 0)
> + return ret;
> +
> + /* select clock source */
> + ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source, rate,
> + SND_SOC_CLOCK_OUT);
> + if (ret < 0)
> + return ret;
> +
> + /* set MCLK division for sample rate */
> + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
> + S3C2410_IISMOD_384FS);
> + if (ret < 0)
> + return ret;
> +
> + /* set BCLK division for sample rate */
> + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
> + S3C2410_IISMOD_32FS);
> + if (ret < 0)
> + return ret;
> +
> + /* set prescaler division for sample rate */
> + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
> + S3C24XX_PRESCALE(div, div));
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd)
> +{
> + struct snd_soc_codec *codec = rtd->codec;
> + int err;
> +
> + /* Add rx1950 specific widgets */
> + err = snd_soc_dapm_new_controls(codec, uda1380_dapm_widgets,
> + ARRAY_SIZE(uda1380_dapm_widgets));
> +
> + if (err)
> + return err;
> +
> + /* Set up rx1950 specific audio path audio_mapnects */
> + err = snd_soc_dapm_add_routes(codec, audio_map,
> + ARRAY_SIZE(audio_map));
> +
> + if (err)
> + return err;
> +
> + snd_soc_dapm_enable_pin(codec, "Headphone Jack");
> + snd_soc_dapm_enable_pin(codec, "Speaker");
> +
> + snd_soc_dapm_sync(codec);
> +
> + snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
> + &hp_jack);
> +
> + snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins),
> + hp_jack_pins);
> +
> + snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
> + hp_jack_gpios);
> +
> + return 0;
> +}
> +
> +static int __init rx1950_init(void)
> +{
> + int ret;
> +
> + /* configure some gpios */
> + ret = gpio_request(S3C2410_GPA(1), "speaker-power");
> + if (ret)
> + goto err_gpio;
> +
> + ret = gpio_direction_output(S3C2410_GPA(1), 0);
> + if (ret)
> + goto err_gpio_conf;
> +
> + s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
> + if (!s3c24xx_snd_device) {
> + ret = -ENOMEM;
> + goto err_plat_alloc;
> + }
> +
> + platform_set_drvdata(s3c24xx_snd_device, &rx1950_asoc);
> + ret = platform_device_add(s3c24xx_snd_device);
> +
> + if (ret) {
> + platform_device_put(s3c24xx_snd_device);
> + goto err_plat_add;
> + }
> +
> + xtal = clk_get(&s3c24xx_snd_device->dev, "xtal");
> +
> + if (IS_ERR(xtal)) {
> + ret = PTR_ERR(xtal);
> + platform_device_unregister(s3c24xx_snd_device);
> + goto err_clk;
> + }
> +
> + return 0;
> +
> +err_clk:
> +err_plat_add:
> +err_plat_alloc:
No need for so much labels :)
> +err_gpio_conf:
> + gpio_free(S3C2410_GPA(1));
> +
> +err_gpio:
> + return ret;
> +}
> +
> +static void __exit rx1950_exit(void)
> +{
> + platform_device_unregister(s3c24xx_snd_device);
> + snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
> + hp_jack_gpios);
> + clk_put(xtal);
> + gpio_free(S3C2410_GPA(1));
> +}
> +
> +module_init(rx1950_init);
> +module_exit(rx1950_exit);
> +
> +/* Module information */
> +MODULE_AUTHOR("Vasily Khoruzhick");
> +MODULE_DESCRIPTION("ALSA SoC RX1950");
> +MODULE_LICENSE("GPL");
I'd be glad if some alsa-guy checked this one.
Reviewed-by: Marek Vasut <marek.vasut@xxxxxxxxx>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
