2010-08-28 16:11, Keith Chew skrev: >> And 6 channels is now working perfectly. I have also tried the early >> patch method, and that works too! >> >> Thanks again for all your help. >> > > Hi David > > Just a quick follow up on this. I have found the volume on the output > jacks to be quite soft. 100% (master, front, clfe, surround) volume in > alsamixer gives the same volume as 60% percent using a soundblaster > card (driver CA0106). Is it a known issue with realtek ALC888 hardware > that the output volume is generally lower? Or perhaps there is some > "gain" setting I can use for the pin config? Answering as a layman - make sure there are no other volume controls you need turn up. There is also the -10 dBv <=> +4 dBu difference, could be that your old card had the other voltage reference. Other than that, I don't know. -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
