On 27 Aug 2010, at 14:56, Jarkko Nikula <jhnikula@xxxxxxxxx> wrote: > It turned out that the output mixers and their routes were misdefined: They > are not mixing output pins to internal signals but opposite. This has worked > for direct left-to-left and right-to-right routes since for those there are > complete routes. For swapped left-to-right and right-to-left routes this is > not working since there are no routes defined between them. > > Another consequence is that those misdefined mixers are incorrectly routed > to several output pins leading unnecessary pin powerings even if there is no > route active to them. > > Fix these by reimplementing the output mixers and routes as they are in > hardware. For completeness add also a few missing links between internal > signals and outputs. > > Signed-off-by: Jarkko Nikula <jhnikula@xxxxxxxxx> Acked-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx> _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
