Am 12.08.2010 02:10, schrieb Raymond Yau: > 2010/8/11 Sebastian H. <vand2@xxxxxx> > >> Hello again >> >> This is a bugfix release. Not all issues have been addressed, but >> hopefully the most annoying ones. >> >> 1.) >> https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3678 >> >> The "EQ Peaks" mixer element gets skipped since there's not way to >> display it correctly at the moment. >> Also the mixer now looks for all element channels from 0 up to >> SND_MIXER_SCHN_LAST (= 31). Formerly it was only for the first 9 channels. >> >> > > control.12 { > comment.access read > comment.type INTEGER > comment.count 20 > > The main problem is this EQ peak control is read only and your > alsamixer-qt4-0.4.0 generate a lot of error messages when the user try to > move the slider , so the only way is to skip the volume control or implement > the equalizer peak using 10 qt4 vumeter widgets > > [EE] EQ Peaks: snd_mixer_selem_set_playback_ > volume_all: Operation not permitted In 0.4.1 the "EQ peak" should be hidden. But that's a temporary solution. I just don't have a card right now with "EQ peak" and implementing a feature/widget that I can't test is not too much fun. > > For CMI8788 , there is only one Master volume control controls with 8 > channels volume control but it seem only has one mute switch Ok, then I don't see a any problem there. Sebastian _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
