Hi,
it is a good practice to CC the maintainers to get the attention (in this case
Liam and Mark)..
On Monday 09 August 2010 21:05:53 ext Michael Trimarchi wrote:
> Hi all,
>
> I'm t rying to unde rstand when the event a re called.
>
> ...
> SND_SOC_DAPM_SPK("Front Speaker", amp_event),
> ...
This is turned on or off by the DAPM power sequences.
Take a look at the sound/soc/soc-dapm.c, and at the beginning of the file, you
can see the on and off sequences.
Generally:
The DAPM_SPK widget will be powered on last, and powered down first, or early to
avoid the pop coming from other widget powering.
>
> My idea was:
>
> - set the mixe r
> - open st ream
>
> amp_event: event =>
> [ 169.820558] ON
>
> - close st ream
>
> and receive the event => OFF. In the aplay example this happen
> afte r some seconds but in my application I don't receive the OFF
> event. What is w rong?
What do you mean? User space will not receive such an event, this is ASoC
internal (specifically DAPM doing it's thing).
The some seconds you see is most likely 5 seconds, which is the soc delay for
going lower power state after the stream has been stopped, or the loopback is
closed.
>
> Michael
>
--
P¨¦ter
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
