At Wed, 4 Aug 2010 21:56:44 +0200, Ondrej Zary wrote: > > On Wednesday 04 August 2010 21:31:32 Takashi Iwai wrote: > > At Wed, 4 Aug 2010 21:08:14 +0200, > > > > Ondrej Zary wrote: > > > On Wednesday 04 August 2010 07:43:44 Takashi Iwai wrote: > > > > At Tue, 3 Aug 2010 23:57:05 +0200, > > > > > > > > Ondrej Zary wrote: > > > > > Enable burst mode to prevent dropouts during high PCI bus usage. > > > > > The card is useless in X without this because of dropouts when > > > > > anything moves on the screen (at least with PCI VGA card). Enabling > > > > > this is also recommended by the datasheet (page 48). > > > > > > > > > > Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx> > > > > > > > > Applied now. Thanks. > > > > > > My previous patch assumed that the DMA mode (represented by 3 lowest bits > > > of ALS4K_GCR99_DMA_EMULATION_CTRL register) is set to the default value > > > 0. If that's not the case, it might result in invalid mode to be set. > > > This v2 patch fixes this potential problem. > > > > > > Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx> > > > > As the previous patch was already applied, could you give the > > incremental change? > > Of course, sorry for that. > > > My previous patch assumed that the DMA mode (represented by 3 lowest bits of > ALS4K_GCR99_DMA_EMULATION_CTRL register) is set to the default value 0. If > that's not the case, it might result in invalid mode to be set. > This patch fixes this potential problem. > > Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx> Applied now. Thanks! Takashi > --- linux-2.6.35-rc3-/sound/pci/als4000.c 2010-08-04 21:53:48.000000000 +0200 > +++ linux-2.6.35-rc3/sound/pci/als4000.c 2010-08-04 20:57:00.000000000 +0200 > @@ -765,7 +765,7 @@ static void snd_als4000_configure(struct > snd_als4k_gcr_write(chip, i, 0); > /* enable burst mode to prevent dropouts during high PCI bus usage */ > snd_als4k_gcr_write(chip, ALS4K_GCR99_DMA_EMULATION_CTRL, > - snd_als4k_gcr_read(chip, ALS4K_GCR99_DMA_EMULATION_CTRL) | 0x04); > + (snd_als4k_gcr_read(chip, ALS4K_GCR99_DMA_EMULATION_CTRL) & ~0x07) | 0x04); > spin_unlock_irq(&chip->reg_lock); > } > > > > > -- > Ondrej Zary > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
