Hi,
On Friday 07 May 2010 09:03:05 Ujfalusi Peter (Nokia-D/Tampere) wrote:
> Add support for the core to limit the maximum volume on an
> existing control.
> The function will modify the soc_mixer_control.max value
> of the given control.
> The new value must be lower than the original one (chip maximum)
>
> If there is a need for limiting a gain on a given control,
> than machine drivers can do the following in their
> snd_soc_dai_link.init function:
>
> snd_soc_limit_volume(codec, "TPA6140A2 Headphone Playback Volume", 21);
>
> This will modify the original 31 (chip maximum) to 21, so user
> space will not be able to set the gain higher than this.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
> ---
>
> Hello Mark, Liam,
>
> So this is my proposed way of doing the volume limiting within the core.
> By looking around the code, this should be safe.
> With this simple function all machine driver can limit gains on a given
> control in a way, that the codec/amp driver does not need to be involved.
>
> What do you think?
>
> ---
> Peter
>
> include/sound/soc.h | 2 ++
> sound/soc/soc-core.c | 38 ++++++++++++++++++++++++++++++++++++++
> 2 files changed, 40 insertions(+), 0 deletions(-)
>
> diff --git a/include/sound/soc.h b/include/sound/soc.h
> index 01e9c66..9f306f0 100644
> --- a/include/sound/soc.h
> +++ b/include/sound/soc.h
> @@ -326,6 +326,8 @@ int snd_soc_get_volsw_s8(struct snd_kcontrol *kcontrol,
> struct snd_ctl_elem_value *ucontrol);
> int snd_soc_put_volsw_s8(struct snd_kcontrol *kcontrol,
> struct snd_ctl_elem_value *ucontrol);
> +int snd_soc_limit_volume(struct snd_soc_codec *codec,
> + const char *name, int max);
>
> /**
> * struct snd_soc_jack_pin - Describes a pin to update based on jack
> detection diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
> index d59076e..5968499 100644
> --- a/sound/soc/soc-core.c
> +++ b/sound/soc/soc-core.c
> @@ -2238,6 +2238,44 @@ int snd_soc_put_volsw_s8(struct snd_kcontrol
> *kcontrol, EXPORT_SYMBOL_GPL(snd_soc_put_volsw_s8);
>
> /**
> + * snd_soc_limit_volume - Set new limit to an existing volume control.
> + *
> + * @codec: where to look for the control
> + * @name: Name of the control
> + * @max: new maximum limit
> + *
> + * Return 0 for success, else error.
> + */
> +int snd_soc_limit_volume(struct snd_soc_codec *codec,
> + const char *name, int max)
> +{
> + struct snd_card *card = codec->card;
> + struct snd_kcontrol *kctl;
> + struct soc_mixer_control *mc;
> + int found = 0;
> + int ret = -EINVAL;
> +
> + /* Sanity check for name and max */
> + if (unlikely(!name || max <= 0))
> + return -EINVAL;
> +
> + list_for_each_entry(kctl, &card->controls, list) {
> + if (!strncmp(kctl->id.name, name, sizeof(kctl->id.name))) {
> + found = 1;
> + break;
> + }
> + }
> + if (found) {
> + mc = (struct soc_mixer_control *)kctl->private_value;
> + if (max < mc->max)
> + mc->max = max;
> + ret = 0;
Probably it would be better to return with 0 only, if we _changed_ the maximum.
I'll resend after the comments.
> + }
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(snd_soc_limit_volume);
> +
> +/**
> * snd_soc_dai_set_sysclk - configure DAI system or master clock.
> * @dai: DAI
> * @clk_id: DAI specific clock ID
--
Péter
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
