Has anyone had any luck enabling S/PDIF output with the Conexant 20561/ctx5051?
On my Lenovo W500 I see a digital output device, I can play on it but
I can't hear any sound on my receiver. There was a patch by Takashi
earlier this year to correct a wrong nodeID
(03b515c45e2a93331d2ac9dc1c16440f7fa313ec, ALSA: hda - Fix SPDIF
output widget for Cxt5051 codec), so I figure some amount of testing
has been done already?
I wonder if this comes from a non-initialized pin configuration as
reported in /proc/asound/card0/codec#0?
Node 0x1c [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x12 [Audio Output] wcaps 0x211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="Conexant Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Thanks
- Pierre
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
