21.04.2010 12:49, The Source пишет: > 21.04.2010 10:53, Clemens Ladisch пишет: >> The Source wrote: >> >>> This device works fine with 1.0.22.1 driver, but doesn't with 1.0.23. >>> snd-usb-audio& Ko are loaded but to no good. alsamixer doesn't list >>> the >>> device and no device files in /dev/snd. >>> >> When the driver doesn't attach, it should log some error message(s) to >> the system log. >> >> >> Regards, >> Clemens >> >> > > usb 8-2: new full speed USB device using uhci_hcd and address 2 > usb 8-2: New USB device found, idVendor=041e, idProduct=30d2 > usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 8-2: Product: SB X-Fi Notebook > usb 8-2: Manufacturer: Creative Technology Ltd > usb 8-2: configuration #1 chosen from 1 choice > input: Creative Technology Ltd SB X-Fi Notebook as > /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.3/input/input11 > generic-usb 0003:041E:30D2.0002: input,hidraw1: USB HID v1.11 Device > [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input3 > input: Creative Technology Ltd SB X-Fi Notebook as > /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.4/input/input12 > generic-usb 0003:041E:30D2.0003: input,hidraw2: USB HID v1.11 Keyboard > [Creative Technology Ltd SB X-Fi Notebook] on usb-0000:00:1d.2-2/input4 > ALSA pcm.c:174: 2:1:1: endpoint lacks sample rate attribute bit, > cannot set. > ALSA pcm.c:174: 2:2:1: endpoint lacks sample rate attribute bit, > cannot set. > > P.S. Another strange glitch - with 1.0.23 strange things start to > happen, for example, bash hust hangs on exit and system becomes slow. Ok, the glitch happens because after inserting the card and getting those dmesg messages modprobe never exits and eats 100% CPU. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
