On 14/04/10 15:39, Takashi Iwai wrote: : > > bdl_pos_adj is really a workaround for devices that report wrong DMA > position (or at the wrong timing). I guess position_fix=1 may fix > better. > > Although the driver already has a dynamic switching of position_fix > method, it checks only the very first read. If it gives a (more or > less) sane value, it prefers the position-buffer method (corresponding > to position_fix=2) rather than reading LPIB register > (position_fix=1). > > It seems, however, that more devices work sanely with LPIB reg > nowdays. This wasn't the case formerly. So, it might be better to > use position_fix=1 as default for modern systems... Frank, Could you check that for you too adding "position_fix=1" fixes the problem? To do so, edit /etc/modprobe.conf and add this line at end: options snd-hda-intel position_fix=1 You need to reboot for this to be taken into account. Cheers, Eric _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
