On Thu, 2010-03-25 at 09:17 +0200, Peter Ujfalusi wrote:
> Hi,
>
> On Thursday 25 March 2010 04:33:54 ext Candelaria Villarreal, Jorge wrote:
> > Hi,
> >
> > I am trying to add support for a digital mixer. The digital mixer is
> > connected like the following example:
> >
> >
> > Path 1 -------\
> > Path 2 --------\
> > MIXER ------> DAC----> ...
> > Path 3 --------/
> > Path 4 -------/
> >
> >
> >
> > However, I think ALSA does not support this configuration, as the DAC
> > should be the first element in a route. I tried adding the DAC to the
> > route first, and connected its output to the mixer inputs, like this:
> >
> > {"Mixer", "Multimedia Ext Switch", "HSDAC Left"},
> > {"Mixer", "Multimedia Ext Switch", "HSDAC Right"},
> >
> > {"Mixer", "Voice Switch", "HSDAC Left"},
> > {"Mixer", "Voice Switch", "HSDAC Right"},
> >
> > {"Mixer", "Multimedia Uplink Switch", "HSDAC Left"},
> > {"Mixer", "Multimedia Uplink Switch", "HSDAC Right"},
> >
> > {"Mixer", "Multimedia Switch", "HSDAC Left"},
> > {"Mixer", "Multimedia Switch", "HSDAC Right"},
> >
> > But this does not seem to work. Can anyone give me some tips? Any comment
> > would be appreciated.
The DAC is traditionally an endpoint (or source) widget within DAPM.
This means it is does not have a source widget to supply it with audio.
>
> Hmm, how these paths are connected, and where?
> What I mean is I suppose you have one path, which is connected to the main CPU,
> than I suspect you have a connection to a modem (voice?), than you have
> possibility to connect some other components via digital link?
>
> What I did with the TWL4030 codec, is that I have moved the actual DAC power
> control from the DAPM_DAC to different widget (the DAPM_DAC is kind of a fake
> one). This was needed to support the digital loopback functionality.
>
> So if you reorder the DAPM widgets (making sure that the switch order still OK),
> than I think you can treat one of the paths as normal playback path (fake
> DAPM_DAC -> mixer (have the DAC power bit handled here) -> ...).
> Than you might consider of adding the rest of the paths as DAPM_INPUT, and
> connect them to the mixer (which after the fake DAC).
> So you kind of have digital loopback from those to the analog domain.
>
This approach currently works well on the twl4030. However, you may want
to consider using SND_SOC_DAPM_AIF_IN() for your input paths here. e.g.
AIF_IN -> MIXER -> DAC -> rest of codec
Liam
--
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
