To make DSP_A mode working correctly the data delay should be configured to 0. DSP_B mode thus can not be used with DAC33, so remove it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx> --- sound/soc/codecs/tlv320dac33.c | 6 +----- 1 files changed, 1 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index a6f1927..f5dbed2 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -1028,11 +1028,7 @@ static int dac33_set_dai_fmt(struct snd_soc_dai *codec_dai, case SND_SOC_DAIFMT_DSP_A: aictrl_a |= DAC33_AFMT_DSP; aictrl_b &= ~DAC33_DATA_DELAY_MASK; - aictrl_b |= DAC33_DATA_DELAY(1); /* 1 bit delay */ - break; - case SND_SOC_DAIFMT_DSP_B: - aictrl_a |= DAC33_AFMT_DSP; - aictrl_b &= ~DAC33_DATA_DELAY_MASK; /* No delay */ + aictrl_b |= DAC33_DATA_DELAY(0); break; case SND_SOC_DAIFMT_RIGHT_J: aictrl_a |= DAC33_AFMT_RIGHT_J; -- 1.7.0.2 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
