Discard this patch. I'm sorry on it.
Thanks
Haojian
On Wed, Mar 10, 2010 at 8:05 AM, Haojian Zhuang
<haojian.zhuang@xxxxxxxxx> wrote:
> From 75fe4b02234f6476e72827508f11f1035d7aaf68 Mon Sep 17 00:00:00 2001
> From: Haojian Zhuang <haojian.zhuang@xxxxxxxxxxx>
> Date: Wed, 10 Mar 2010 06:32:43 -0500
> Subject: [PATCH] [ARM] mmp: support ssp in pxa168
>
> Support ssp in pxa168. The basic function of SSP is same as pxa, but clock
> source and IRQ is changed.
>
> Signed-off-by: Haojian Zhuang <haojian.zhuang@xxxxxxxxxxx>
> ---
> arch/arm/mach-mmp/include/mach/irqs.h | 10 +-
> arch/arm/mach-mmp/include/mach/pxa168.h | 21 ++++
> arch/arm/mach-mmp/include/mach/regs-apbc.h | 10 +-
> arch/arm/mach-mmp/include/mach/regs-mpmu.h | 48 ++++++++++
> arch/arm/mach-mmp/include/mach/regs-ssp.h | 141 ++++++++++++++++++++++++++++
> arch/arm/mach-mmp/pxa168.c | 15 +++
> arch/arm/plat-pxa/include/plat/ssp.h | 2 +
> arch/arm/plat-pxa/ssp.c | 1 +
> 8 files changed, 238 insertions(+), 10 deletions(-)
> create mode 100644 arch/arm/mach-mmp/include/mach/regs-mpmu.h
> create mode 100644 arch/arm/mach-mmp/include/mach/regs-ssp.h
>
> diff --git a/arch/arm/mach-mmp/include/mach/irqs.h
> b/arch/arm/mach-mmp/include/mach/irqs.h
> index 0270119..b379cde 100644
> --- a/arch/arm/mach-mmp/include/mach/irqs.h
> +++ b/arch/arm/mach-mmp/include/mach/irqs.h
> @@ -5,10 +5,10 @@
> * Interrupt numbers for PXA168
> */
> #define IRQ_PXA168_NONE (-1)
> -#define IRQ_PXA168_SSP3 0
> -#define IRQ_PXA168_SSP2 1
> -#define IRQ_PXA168_SSP1 2
> -#define IRQ_PXA168_SSP0 3
> +#define IRQ_PXA168_SSP4 0
> +#define IRQ_PXA168_SSP3 1
> +#define IRQ_PXA168_SSP2 2
> +#define IRQ_PXA168_SSP1 3
> #define IRQ_PXA168_PMIC_INT 4
> #define IRQ_PXA168_RTC_INT 5
> #define IRQ_PXA168_RTC_ALARM 6
> @@ -20,7 +20,7 @@
> #define IRQ_PXA168_TIMER2 14
> #define IRQ_PXA168_TIMER3 15
> #define IRQ_PXA168_CMU 16
> -#define IRQ_PXA168_SSP4 17
> +#define IRQ_PXA168_SSP5 17
> #define IRQ_PXA168_MSP_WAKEUP 19
> #define IRQ_PXA168_CF_WAKEUP 20
> #define IRQ_PXA168_XD_WAKEUP 21
> diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h
> b/arch/arm/mach-mmp/include/mach/pxa168.h
> index 3ad612c..3b2bd5d 100644
> --- a/arch/arm/mach-mmp/include/mach/pxa168.h
> +++ b/arch/arm/mach-mmp/include/mach/pxa168.h
> @@ -14,6 +14,11 @@ extern struct pxa_device_desc pxa168_device_pwm1;
> extern struct pxa_device_desc pxa168_device_pwm2;
> extern struct pxa_device_desc pxa168_device_pwm3;
> extern struct pxa_device_desc pxa168_device_pwm4;
> +extern struct pxa_device_desc pxa168_device_ssp1;
> +extern struct pxa_device_desc pxa168_device_ssp2;
> +extern struct pxa_device_desc pxa168_device_ssp3;
> +extern struct pxa_device_desc pxa168_device_ssp4;
> +extern struct pxa_device_desc pxa168_device_ssp5;
> extern struct pxa_device_desc pxa168_device_nand;
>
> static inline int pxa168_add_uart(int id)
> @@ -67,6 +72,22 @@ static inline int pxa168_add_pwm(int id)
> return pxa_register_device(d, NULL, 0);
> }
>
> +static inline int pxa168_add_ssp(int id)
> +{
> + struct pxa_device_desc *d = NULL;
> +
> + switch (id) {
> + case 1: d = &pxa168_device_ssp1; break;
> + case 2: d = &pxa168_device_ssp2; break;
> + case 3: d = &pxa168_device_ssp3; break;
> + case 4: d = &pxa168_device_ssp4; break;
> + case 5: d = &pxa168_device_ssp5; break;
> + default:
> + return -EINVAL;
> + }
> + return pxa_register_device(d, NULL, 0);
> +}
> +
> static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
> {
> return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
> diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h
> b/arch/arm/mach-mmp/include/mach/regs-apbc.h
> index 712af03..1a96585 100644
> --- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
> +++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
> @@ -26,8 +26,6 @@
> #define APBC_PXA168_PWM2 APBC_REG(0x010)
> #define APBC_PXA168_PWM3 APBC_REG(0x014)
> #define APBC_PXA168_PWM4 APBC_REG(0x018)
> -#define APBC_PXA168_SSP1 APBC_REG(0x01c)
> -#define APBC_PXA168_SSP2 APBC_REG(0x020)
> #define APBC_PXA168_RTC APBC_REG(0x028)
> #define APBC_PXA168_TWSI0 APBC_REG(0x02c)
> #define APBC_PXA168_KPC APBC_REG(0x030)
> @@ -35,14 +33,16 @@
> #define APBC_PXA168_AIB APBC_REG(0x03c)
> #define APBC_PXA168_SW_JTAG APBC_REG(0x040)
> #define APBC_PXA168_ONEWIRE APBC_REG(0x048)
> -#define APBC_PXA168_SSP3 APBC_REG(0x04c)
> #define APBC_PXA168_ASFAR APBC_REG(0x050)
> #define APBC_PXA168_ASSAR APBC_REG(0x054)
> -#define APBC_PXA168_SSP4 APBC_REG(0x058)
> -#define APBC_PXA168_SSP5 APBC_REG(0x05c)
> #define APBC_PXA168_TWSI1 APBC_REG(0x06c)
> #define APBC_PXA168_UART3 APBC_REG(0x070)
> #define APBC_PXA168_AC97 APBC_REG(0x084)
> +#define APBC_PXA168_SSP1 APBC_REG(0x81c)
> +#define APBC_PXA168_SSP2 APBC_REG(0x820)
> +#define APBC_PXA168_SSP3 APBC_REG(0x84c)
> +#define APBC_PXA168_SSP4 APBC_REG(0x858)
> +#define APBC_PXA168_SSP5 APBC_REG(0x85c)
>
> /*
> * APB Clock register offsets for PXA910
> diff --git a/arch/arm/mach-mmp/include/mach/regs-mpmu.h
> b/arch/arm/mach-mmp/include/mach/regs-mpmu.h
> new file mode 100644
> index 0000000..0d57236
> --- /dev/null
> +++ b/arch/arm/mach-mmp/include/mach/regs-mpmu.h
> @@ -0,0 +1,48 @@
> +/*
> + * linux/arch/arm/mach-mmp/include/mach/regs-mpmu.h
> + *
> + * Main Power Management Unit
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __ASM_MACH_REGS_MPMU_H
> +#define __ASM_MACH_REGS_MPMU_H
> +
> +#include <mach/addr-map.h>
> +
> +#define MPMU_VIRT_BASE (APB_VIRT_BASE + 0x50000)
> +#define MPMU_REG(off) (MPMU_VIRT_BASE + (off))
> +
> +#define MPMU_CPCR MPMU_REG(0x0000)
> +#define MPMU_FCCR MPMU_REG(0x0008)
> +#define MPMU_POCR MPMU_REG(0x000c)
> +#define MPMU_POSR MPMU_REG(0x0010)
> +#define MPMU_SUCCR MPMU_REG(0x0014)
> +#define MPMU_VRCR MPMU_REG(0x0018)
> +#define MPMU_OHCR MPMU_REG(0x001c)
> +#define MPMU_GPCR MPMU_REG(0x0030)
> +#define MPMU_PLL2CR MPMU_REG(0x0034)
> +#define MPMU_SCCR MPMU_REG(0x0038)
> +#define MPMU_CWUCRM MPMU_REG(0x004c)
> +#define MPMU_PLL1_REG1 MPMU_REG(0x0050)
> +#define MPMU_PLL1_REG2 MPMU_REG(0x0054)
> +#define MPMU_PLL1_SSC MPMU_REG(0x0058)
> +#define MPMU_PLL2_REG1 MPMU_REG(0x0060)
> +#define MPMU_PLL2_REG2 MPMU_REG(0x0064)
> +#define MPMU_PLL2_SSC MPMU_REG(0x0068)
> +#define MPMU_TS MPMU_REG(0x0080)
> +#define MPMU_WDTPCR MPMU_REG(0x0200)
> +#define MPMU_APCR MPMU_REG(0x1000)
> +#define MPMU_APSR MPMU_REG(0x1004)
> +#define MPMU_APRR MPMU_REG(0x1020)
> +#define MPMU_ACGR MPMU_REG(0x1024)
> +#define MPMU_ARSR MPMU_REG(0x1028)
> +#define MPMU_AWUCRS MPMU_REG(0x1048)
> +#define MPMU_AWUCRM MPMU_REG(0x104c)
> +#define MPMU_ASYSDR MPMU_REG(0x1050)
> +#define MPMU_ASSPDR MPMU_REG(0x1054)
> +
> +#endif /* __ASM_MACH_REGS_APMU_H */
> diff --git a/arch/arm/mach-mmp/include/mach/regs-ssp.h
> b/arch/arm/mach-mmp/include/mach/regs-ssp.h
> new file mode 100644
> index 0000000..7e16eeb
> --- /dev/null
> +++ b/arch/arm/mach-mmp/include/mach/regs-ssp.h
> @@ -0,0 +1,141 @@
> +#ifndef __ASM_ARCH_REGS_SSP_H
> +#define __ASM_ARCH_REGS_SSP_H
> +
> +/*
> + * SSP Serial Port Registers
> + */
> +
> +#define SSCR0 (0x00) /* SSP Control Register 0 */
> +#define SSCR1 (0x04) /* SSP Control Register 1 */
> +#define SSSR (0x08) /* SSP Status Register */
> +#define SSITR (0x0C) /* SSP Interrupt Test Register */
> +#define SSDR (0x10) /* SSP Data Write/Data Read Register */
> +
> +#define SSTO (0x28) /* SSP Time Out Register */
> +#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */
> +#define SSTSA (0x30) /* SSP Tx Timeslot Active */
> +#define SSRSA (0x34) /* SSP Rx Timeslot Active */
> +#define SSTSS (0x38) /* SSP Timeslot Status */
> +
> +#if defined(CONFIG_CPU_PXA910)
> +#define SSACD (0x3C) /* SSP Audio Clock Divider */
> +#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */
> +#endif
> +
> +/* Common bits first */
> +#define SSCR0_DSS_MASK (0x0000000f) /* Data Size Select (mask) */
> +#define SSCR0_DSS(x) ((x) - 1) /* Data Size Select [4..16] */
> +#define SSCR0_FRF (0x3 << 4) /* FRame Format (mask) */
> +#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral
> Interface (SPI) */
> +#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial
> Protocol (SSP) */
> +#define SSCR0_National (0x2 << 4) /* National Microwire */
> +#define SSCR0_PSP (0x3 << 4) /* Programmable Serial Protocol (PSP) */
> +#define SSCR0_ECS (1 << 6) /* External clock select */
> +#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
> +
> +#define SSCR0_SCR (0xfff << 8) /* Serial Clock Rate (mask) */
> +#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
> +
> +#define SSCR0_EDSS (1 << 20) /* Extended data size select */
> +#define SSCR0_NCS (1 << 21) /* Network clock select */
> +#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
> +#define SSCR0_TIM (1 << 23) /* Transmit FIFO underrun interrupt mask */
> +#define SSCR0_FRDC (0x7 << 24) /* Frame rate divider control (mask) */
> +#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per
> frame [1..8] */
> +#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */
> +#define SSCR0_ACS (1 << 30) /* Audio clock select */
> +#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
> +
> +#if defined(CONFIG_CPU_PXA168) || defined(CONFIG_CPU_PXA910)
> +#define SSCR0_MODE_52M (1 << 27) /* 52Mbps Mode */
> +#endif
> +
> +#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
> +#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
> +#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
> +#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
> +#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
> +#define SSCR1_TFT_MASK (0xf << 6) /* Transmit FIFO Threshold (mask) */
> +#define SSCR1_TFT(x) (((x) - 1) << 6) /* level [1..16] */
> +#define SSCR1_RFT_MASK (0xf << 10) /* Receive FIFO Threshold (mask) */
> +#define SSCR1_RFT(x) (((x) - 1) << 10) /* level [1..16] */
> +#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/read */
> +#define SSCR1_STRF (1 << 15) /* Select FIFO for EFWR */
> +#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */
> +#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */
> +#define SSCR1_TINTE (1 << 19) /* Receiver Timeout Interrupt Enable */
> +#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
> +#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
> +#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */
> +#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */
> +#define SSCR1_SFRMDIR (1 << 24) /* SSP Frame (SSPSFRMx) Direction */
> +#define SSCR1_SCLKDIR (1 << 25) /* SSP Serial Bit Rate Clock
> (SSPSCLKx) Direction */
> +#define SSCR1_ECRB (1 << 26) /* Enable Clock Request B */
> +#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */
> +#define SSCR1_SCFR (1 << 28) /* Slave Clock Free Running */
> +#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error Interrupt */
> +#define SSCR1_TTE (1 << 30) /* TxD Three-state Enable */
> +#define SSCR1_TTELP (1 << 31) /* TxD Three-state Enable On Last Phase */
> +
> +#if defined(CONFIG_CPU_PXA910)
> +#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
> +#endif
> +
> +#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
> +#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
> +#define SSSR_BSY (1 << 4) /* SSP Busy */
> +#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
> +#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
> +#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
> +#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level (mask) */
> +#define SSSR_TFL(x) ((x) << 8)
> +#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level */
> +#define SSSR_RFL(x) ((x) << 12)
> +#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
> +#define SSSR_TINT (1 << 19) /* Receiver Timeout Interrupt */
> +#define SSSR_EOC (1 << 20) /* End of Chain */
> +#define SSSR_TUR (1 << 21) /* Transmit FIFO Underrun */
> +#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */
> +#define SSSR_BCE (1 << 23) /* Bit Count Error */
> +#define SSSR_TX_OSS (1 << 30) /* Tx FIFO Odd Sample Status */
> +#define SSSR_OSS (1 << 31) /* Odd Sample Status */
> +
> +#define SSITR_TTFS (1 << 5) /* Test Tx FIFO Service Request */
> +#define SSITR_TRFS (1 << 6) /* Test Rx FIFO Service Request */
> +#define SSITR_TROR (1 << 7) /* Test Rx FIFO Overrun */
> +
> +#define SSPSP_SCMODE_MASK (0x3) /* Serial Bit Rate Clock Mode */
> +#define SSPSP_SCMODE(x) ((x) << 0)
> +#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
> +#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
> +#define SSPSP_STRTDLY_MASK (0x7 << 4) /* Start Delay */
> +#define SSPSP_STRTDLY(x) ((x) << 4)
> +#define SSPSP_DMYSTRT_MASK (0x3 << 7) /* Dummy Start */
> +#define SSPSP_DMYSTRT(x) ((x) << 7)
> +#define SSPSP_SFRMDLY_MASK (0x7f << 9) /* Serial Frame Delay */
> +#define SSPSP_SFRMDLY(x) ((x) << 9)
> +#define SSPSP_SFRMWDTH_MASK (0x3f << 16) /* Serial Frame Width */
> +#define SSPSP_SFRMWDTH(x) ((x) << 16)
> +#define SSPSP_DMYSTOP_MASK (0x3 << 23) /* Dummy Stop */
> +#define SSPSP_DMYSTOP(x) ((x) << 23)
> +#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
> +#define SSPSP_EDMYSTRT_MASK (0x3 << 26) /* Extended Dummy Start */
> +#define SSPSP_EDMYSTRT(x) ((x) << 26)
> +#define SSPSP_EDMYSTOP_MASK (0x7 << 28) /* Extended Dummy Stop */
> +#define SSPSP_EDMYSTOP(x) ((x) << 28)
> +#define SSPSP_TIMING_MASK (SSPSP_STRTDLY_MASK | SSPSP_DMYSTRT_MASK \
> + | SSPSP_SFRMDLY_MASK | SSPSP_SFRMWDTH_MASK \
> + | SSPSP_DMYSTOP_MASK | SSPSP_EDMYSTRT_MASK \
> + | SSPSP_EDMYSTOP_MASK | SSPSP_FSRT)
> +
> +
> +#if defined(CONFIG_CPU_PXA910)
> +#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
> +#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
> +#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
> +#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */
> +#endif
> +
> +
> +#endif /* __ASM_ARCH_REGS_SSP_H */
> +
> diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
> index 37dbdde..5f1a4dd 100644
> --- a/arch/arm/mach-mmp/pxa168.c
> +++ b/arch/arm/mach-mmp/pxa168.c
> @@ -72,6 +72,11 @@ static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
> static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
> static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
> static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
> +static APBC_CLK(ssp1, PXA168_SSP1, 4, 0);
> +static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
> +static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
> +static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
> +static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
>
> static APMU_CLK(nand, NAND, 0x01db, 208000000);
>
> @@ -85,6 +90,11 @@ static struct clk_lookup pxa168_clkregs[] = {
> INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
> INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
> INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
> + INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
> + INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
> + INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
> + INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
> + INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
> INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
> };
>
> @@ -132,3 +142,8 @@ PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE,
> 0xd401a400, 0x10);
> PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
> PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
> PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
> +PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53);
> +PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
> +PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
> +PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
> +PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
> diff --git a/arch/arm/plat-pxa/include/plat/ssp.h
> b/arch/arm/plat-pxa/include/plat/ssp.h
> index fc83ba7..06cffae 100644
> --- a/arch/arm/plat-pxa/include/plat/ssp.h
> +++ b/arch/arm/plat-pxa/include/plat/ssp.h
> @@ -14,6 +14,7 @@
> * PXA26x SSP, NSSP, ASSP
> * PXA27x SSP1, SSP2, SSP3
> * PXA3xx SSP1, SSP2, SSP3, SSP4
> + * PXA168 SSP1, SSP2, SSP3, SSP4, SSP5
> */
>
> #ifndef __ASM_PLAT_SSP_H
> @@ -27,6 +28,7 @@ enum pxa_ssp_type {
> PXA25x_SSP, /* pxa 210, 250, 255, 26x */
> PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
> PXA27x_SSP,
> + PXA168_SSP,
> };
>
> struct ssp_device {
> diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
> index d4a7673..4dc2ee6 100644
> --- a/arch/arm/plat-pxa/ssp.c
> +++ b/arch/arm/plat-pxa/ssp.c
> @@ -465,6 +465,7 @@ static const struct platform_device_id ssp_id_table[] = {
> { "pxa25x-ssp", PXA25x_SSP },
> { "pxa25x-nssp", PXA25x_NSSP },
> { "pxa27x-ssp", PXA27x_SSP },
> + { "pxa168-ssp", PXA168_SSP },
> { },
> };
>
> --
> 1.5.6.5
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
