At Mon, 1 Mar 2010 19:27:53 +0800,
Wei Ni wrote:
>
> Hi, Takashi
> I developed the hdmi audio driver for new chipset MCP89 and GT21x.
> The new HAD controller and codec support standard HDMI operation.
>
> I attached the patch file, please check it.
Thanks. A brief review comments below.
> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> index d5c93ad..fbf2c29 100644
> --- a/sound/pci/hda/hda_intel.c
> +++ b/sound/pci/hda/hda_intel.c
> @@ -267,7 +267,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
> #define RIRB_INT_MASK 0x05
>
> /* STATESTS int mask: S3,SD2,SD1,SD0 */
> -#define AZX_MAX_CODECS 4
> +#define AZX_MAX_CODECS 8
Changing this blindly to all codecs seems a bit dangerous.
We have bad experiences regarding the codec probing, and probing more
codec slots may result in unexpected behavior with the older chip.
Do you know which controller chip supports more than 4 slots?
> +struct hdmi_audio_infoframe {
> + u8 type; /* 0x84 */
> + u8 ver; /* 0x01 */
> + u8 len; /* 0x0a */
> +
> + u8 checksum; /* PB0 */
> + u8 CC02_CT47; /* CC in bits 0:2, CT in 4:7 */
> + u8 SS01_SF24;
> + u8 CXT04;
> + u8 CA;
> + u8 LFEPBL01_LSV36_DM_INH7;
...
Let's merge the stuff with patch_intelhdmi.c later...
> +static void hdmi_get_show_eld(struct hda_codec *codec, hda_nid_t pin_nid,
> + struct hdmi_eld *eld)
> +{
> + if (!snd_hdmi_get_eld(eld, codec, pin_nid))
> + snd_hdmi_show_eld(eld);
So, now this module depends on the ELD helper?
Then we need to change Makefile and Kconfig as well.
Right now, the eld helper is built into intel-hdmi module. Now this
is needed to be individual or built-in snd-hda-codec.
thanks,
Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
