I probably should have specified. I see the spdif output and all its controls, I can play to it, it just won't output any data data to the spdif port. On 28/02/10 05:18 PM, Jonathan Thibault wrote: > Hello alsa devs :) > > I've tried to change the pin configuration for model=dell-m22 to match that of the windows driver as per this section of the relevant .INI file, but that hasn't really changed anything. I haven't really incorporated the windows gpio settings as I couldn't find figure out how to do so. > > Jonathan > > ---- relevant bits of windows .ini ---- > [HKR\Settings\pin] > CodecName = STAC9200-32 > [HKR\Settings\pin\08] > CfgDflt = dword: 0x40C003FA > [HKR\Settings\pin\09] > CfgDflt = dword: 0x01441340 > [HKR\Settings\pin\10] > CfgDflt = dword: 0x03A1102E > AltCfg = hex: 2F,10,81,03 > Bias = hex: FF,04,02 > [HKR\Settings\pin\11] > CfgDflt = dword: 0x401003FB > [HKR\Settings\pin\12] > CfgDflt = dword: 0x403003FC > [HKR\Settings\pin\0d] > CfgDflt = dword: 0x0321121F > Action = hex: 80,00,81,0E,87,00 > [HKR\Settings\pin\0e] > CfgDflt = dword: 0x90170310 > [HKR\Settings\pin\0F] > CfgDflt = dword: 0x90A70320 > ... > [HKR\Settings\gpio] > 02 = hex: 0x00, 0x01, 0x0E, 0x00, 0x00, 0x07, 0x00 > 01 = hex: 0x82 > 03 = hex: 0x82 > ---------------------------------------- > > Here is the codec information. > > cat /proc/asound/card0/codec#0 > Codec: SigmaTel STAC9200 > Address: 0 > Function Id: 0x1 > Vendor Id: 0x83847690 > Subsystem Id: 0x102801c8 > Revision Id: 0x102201 > No Modem Function Group found > Default PCM: > rates [0x7e0]: 44100 48000 88200 96000 176400 192000 > bits [0xe]: 16 20 24 > formats [0x1]: PCM > Default Amp-In caps: N/A > Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 > GPIO: io=4, o=0, i=0, unsolicited=1, wake=1 > IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 > IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 > IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 > IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 > Node 0x02 [Audio Output] wcaps 0xd0401: Stereo > Converter: stream=5, channel=0 > Power: setting=D0, actual=D0 > Delay: 13 samples > Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo > Converter: stream=0, channel=0 > SDI-Select: 0 > Power: setting=D0, actual=D0 > Delay: 13 samples > Connection: 1 > 0x0a > Processing caps: benign=0, ncoeff=0 > Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital > Converter: stream=0, channel=0 > SDI-Select: 0 > Digital: > Digital category: 0x0 > PCM: > rates [0x160]: 44100 48000 96000 > bits [0xe]: 16 20 24 > formats [0x5]: PCM AC3 > Delay: 4 samples > Connection: 1 > 0x08 > Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital > Converter: stream=5, channel=0 > Digital: > Digital category: 0x0 > PCM: > rates [0x1e0]: 44100 48000 88200 96000 > bits [0xe]: 16 20 24 > formats [0x5]: PCM AC3 > Delay: 4 samples > Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital > Delay: 3 samples > Node 0x07 [Audio Selector] wcaps 0x300901: Stereo R/L > Connection: 3 > 0x02* 0x08 0x0a > Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital > Pincap 0x00010024: IN EAPD Detect > EAPD 0x0: > Pin Default 0x40c003fa: [N/A] SPDIF In at Ext N/A > Conn = Unknown, Color = Unknown > DefAssociation = 0xf, Sequence = 0xa > Misc = NO_PRESENCE > Pin-ctls: 0x00: > Unsolicited: tag=00, enabled=0 > Power: setting=D0, actual=D0 > Delay: 3 samples > Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital > Pincap 0x00000010: OUT > Pin Default 0x01441340: [Jack] SPDIF Out at Ext Rear > Conn = RCA, Color = Black > DefAssociation = 0x4, Sequence = 0x0 > Misc = NO_PRESENCE > Pin-ctls: 0x40: OUT > Connection: 2 > 0x05* 0x0a > Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L > Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 > Amp-Out vals: [0x08 0x08] > Connection: 1 > 0x0c > Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out > Amp-Out caps: N/A > Amp-Out vals: [0x19 0x19] > Connection: 1 > 0x07 > Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out > Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 > Amp-Out vals: [0x00 0x00] > Connection: 5 > 0x10 0x0f* 0x0e 0x0d 0x12 > Node 0x0d [Pin Complex] wcaps 0x400181: Stereo > Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense > Pin Default 0x0321121f: [Jack] HP Out at Ext Left > Conn = 1/8, Color = Black > DefAssociation = 0x1, Sequence = 0xf > Pin-ctls: 0x00: > Unsolicited: tag=01, enabled=1 > Connection: 1 > 0x0b > Node 0x0e [Pin Complex] wcaps 0x400181: Stereo > Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense > Pin Default 0x90170310: [Fixed] Speaker at Int N/A > Conn = Analog, Color = Unknown > DefAssociation = 0x1, Sequence = 0x0 > Misc = NO_PRESENCE > Pin-ctls: 0x40: OUT > Unsolicited: tag=00, enabled=0 > Connection: 1 > 0x0b > Node 0x0f [Pin Complex] wcaps 0x400181: Stereo > Pincap 0x00000037: IN OUT Detect Trigger ImpSense > Pin Default 0x90a70320: [Fixed] Mic at Int N/A > Conn = Analog, Color = Unknown > DefAssociation = 0x2, Sequence = 0x0 > Misc = NO_PRESENCE > Pin-ctls: 0x20: IN > Unsolicited: tag=00, enabled=0 > Connection: 1 > 0x0b > Node 0x10 [Pin Complex] wcaps 0x400181: Stereo > Pincap 0x00001737: IN OUT Detect Trigger ImpSense > Vref caps: HIZ 50 GRD 80 > Pin Default 0x0381102f: [Jack] Line In at Ext Left > Conn = 1/8, Color = Black > DefAssociation = 0x2, Sequence = 0xf > Pin-ctls: 0x20: IN VREF_HIZ > Unsolicited: tag=02, enabled=1 > Connection: 1 > 0x0b > Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out > Amp-Out caps: N/A > Amp-Out vals: [0x00] > Pincap 0x00000010: OUT > Pin Default 0x401003fb: [N/A] Speaker at Ext N/A > Conn = Unknown, Color = Unknown > DefAssociation = 0xf, Sequence = 0xb > Misc = NO_PRESENCE > Pin-ctls: 0x00: > Connection: 1 > 0x13 > Node 0x12 [Pin Complex] wcaps 0x400001: Stereo > Pincap 0x00000020: IN > Pin Default 0x403003fc: [N/A] CD at Ext N/A > Conn = Unknown, Color = Unknown > DefAssociation = 0xf, Sequence = 0xc > Misc = NO_PRESENCE > Pin-ctls: 0x20: IN > Node 0x13 [Audio Mixer] wcaps 0x200100: Mono > Connection: 1 > 0x07 > Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out > Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 > Amp-Out vals: [0x00] > > > cat /proc/asound/card0/codec#1 > Codec: Conexant ID 2bfa > Address: 1 > Function Id: 0x2 > Vendor Id: 0x14f12bfa > Subsystem Id: 0x14f100c3 > Revision Id: 0x90000 > Modem Function Group: 0x2 > > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@xxxxxxxxxxxxxxxx > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
