On Thu, 18 Feb 2010 20:42:27 +0200 Ilkka Koskinen <ilkka.koskinen@xxxxxxxxx> wrote: > The first patch implements McBSP sidetone feature on OMAP3 while the second > one provides ALSA interface for using it. > > The patch set is based on the patch Eduardo Valentin sent to alsa-devel > mailing list in October 2009. Channel gain control and enabling the sidetone > have been moved to ALSA interface as suggested in comments. > > These patches apply on top of Janusz Krzysztofik's McBSP register cache > patches in linux-omap-2.6.git > > Since the version 3, the buggy channel gain control has been fixed. ASoC part > have been simplified resulting in removing a couple unnecessary functions. > Added a comment to ASoC part explaining McBSP port number vs. index values > used in OMAP McBSP implementation. > I still have two concern: 1. port number vs. index difference inside driver code is not enough It's just confusing if a machine driver and internal API (mcbsp.c) has to use different indexing. See: omap_mcbsp_st_add_controls(codec, 2); ... *(unsigned int *)omap3beagle_dai.cpu_dai->private_data = 1; /* McBSP2 */ and mcbsp->id use in mcbsp.c. 2. I cannot change the sidetone level with alsamixer Is this bug with the alsamixer? With amixer I'm able to set positive values but not negative amixer set -D hw:0 'McBSP2 Sidetone Channel 0' 32767 What I'm looking here, is that I can execute a test below with unit impulse response tap filter, hear the sound and note that the volume is changing as I'm changing the sidetone volume :-) arecord -f dat >/dev/null |aplay -f dat /dev/zero -- Jarkko _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel