Hi all, I'm trying to setup my Audio4DJ usb soundcard. It has 4 channels (2 stereo ones). ALSA information script output is here http://www.alsa-project.org/db/?f=fe4cc3eda2df49c6055f55d4cef935524124d1a1 and my .asoundrc is here http://pastebin.com/m3f70572d Currently my .asoundrc has 4 devices: - Audio4DJ_A (combines channels 1 and 2) - Audio4DJ_B (combines channels 3 and 4) - Audio4DJ (combines Audio4DJ_A and Audio4DJ_B) - ttable is a device for JACK according to this http://alsa-project.org/main/index.php/Asoundrc#Virtual_multi_channel_devices My goal is to have a separate ALSA soundcard for each pair of channels, an ALSA soundcard for 4 channels and a JACK device for all 4 channels. Running speaker-test -c2 -D plughw:Audio4DJ,0,X -twav -l1 with X=0 and X=1 correctly outputs to each channel. Also, pcm.Audio4DJ_A and pcm.Audio4DJ_B correctly work through both ALSA and JACK for each pair of channels. However, if I try to use the pcm.Audio4DJ (which combines both pcm.Audio4DJ_A and pcm.Audio4DJ_B), I get correct output through channels 1 and 2, but channels 3 and 4 have a lot of garbage - you can hear the track playing but it is at a very high pitch and distorted. JACK doesn't even start with the Audio4DJ device: # jackd -R --timeout 4500 -d alsa -d Audio4DJ -p 128 -n 3 -r 44100 -i 4 -o apparent rate = 44100 creating alsa driver ... Audio4DJ|Audio4DJ|128|3|44100|4|4|nomon|swmeter|-|32bit configuring for 44100Hz, period = 128 frames (2.9 ms), buffer = 3 periods ALSA: final selected sample format for capture: 32bit float little-endian ALSA: use 3 periods for capture ALSA: final selected sample format for playback: 32bit float little-endian ALSA: use 3 periods for playback ALSA: could not complete read of 0 frames: error = -32 cycle execution failure, exiting DRIVER NT: could not run driver cycle jack main caught signal 12 (crashes immediately) The ttable device locks up the system for a few seconds and then JACK crashes: # jackd -R --timeout 4500 -d alsa -d ttable -p 128 -n 3 -r 44100 -i 4 -o apparent rate = 44100 creating alsa driver ... ttable|ttable|128|3|44100|4|4|nomon|swmeter|-|32bit configuring for 44100Hz, period = 128 frames (2.9 ms), buffer = 3 periods ALSA: final selected sample format for capture: 32bit integer little-endian ALSA: use 3 periods for capture ALSA: final selected sample format for playback: 32bit integer little-endian ALSA: use 3 periods for playback jackd watchdog: timeout - killing jackd Without a .asoundrc it doesn't even work. Can someone please tell me if this is expected behaviour or a bug? Thanks, Pedro _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
