On Fri, Jan 29, 2010 at 09:01:30AM +0200, Peter Ujfalusi wrote: > What I have found out is that after boot these bits were set (obviously), after > the audio activity, they were cleared (not all, since if the given DAPM control > was not in the path, it was left enabled either way). > Now these bits are 0 after boot, and only enabled, when a certain path needs it. > In short: the overall power consumption was higher after boot, than what was > after for example the playback was stopped... Hrm, that shouldn't happen - DAPM should be syncing during startup which will turn off anything that's left turned on. I'll have to fake up a test for this, I'd not notice problems normally since all the devices I start with power everything off by default. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
