On Tue, 19 Jan 2010 23:15:41 -0800 (PST) "S. Aguinaga" <sa_jr@xxxxxxxxx> wrote: > No luck, same behavior. I edited the first file listed listed below and recompiled it and installed it. > Then I restarted the system with the indigo card in place, and the VU meters show levels in the -120 to -100 dB? I did some tests with my indigoIOx. I added the "#define ECHOCARD_HAS_LINE_OUT_GAIN" in indigoiox.c and it compiled and loaded fine. That change adds this control to the set (which does not work on my card): numid=17,iface=MIXER,name='Line Playback Volume' ; type=INTEGER,access=rw---R--,values=2,min=-128,max=6,step=0 : values=-128,-128 | dBscale-min=-128.00dB,step=1.00dB,mute=1 Please check it exists with "amixer -c <cardnumber> contents" (your numid may differ). If it doesn't, you didn't patch indigoio.c correctly. That control is not supposed to exist in Indigo and Mia cards, but since in the Mia it does, it might be there in the CARDBUS indigos as well. Please use a recent echomixer and make sure the values of the control above are not -128dB. -- Giuliano. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
