On Thu, 2010-01-21 at 19:25 +0000, Mark Brown wrote: > On 21 Jan 2010, at 18:52, Steve Chen <schen@xxxxxxxxxx> wrote: > > > On Thu, 2010-01-21 at 11:35 -0600, Miguel Aguilar wrote: > >> Hi, > >> > >> The following patch series adds support for the Voice Codec in the > >> Davinci > >> platform and in this particular case for the DM365 EVM. > >> > >> The DM365 EVM has two codecs the AIC3x and the Voice Codec, however > >> at this > >> point is not possible to have both enabled simultaneously since the > >> soc-core > >> doesn't support that, so a patch for enable both simultaneously > >> will be sent > >> when this support is available in the soc-core. > > > > I thought, perhaps incorrectly, that soc-core already has the > > ability to > > support multiple codecs. When I worked on ALSA soc support for > > DM6467, > > one of the McASP was connected to AIC3x and the other is SPDIF output. > > Both interface can work at the same time. I just assumed that if we > > have two McASP (or other audio controllers) connected to two codecs. > > They would both just work under ALSA soc. Please let me know if I'm > > mistaken. > > It can only cope with one CODEC with registers. That S/PDIF interface > has no registers so could be made to work. I just pull up the code and looked at it again. You are right. Sorry about the noise. Steve _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
