On Thu, Jan 21, 2010 at 7:37 PM, Liam Girdwood <lrg@xxxxxxxxxxxxxxx> wrote: > On Thu, 2010-01-21 at 15:58 +0900, jassi brar wrote: >> The s3c2443-ac97.c is used by SMDK2443 and LN2440SBC machines. My new >> driver is at least as good as old one for SMDK2443(both detect >> controller fine but none produce any sound.. >> might be some h/w issue on the only board I have got). > > It does sound like the AC97 link is up and running. What codec is used > here ? Yes, link is fine. Irqs happen too and no xruns. Just I can't hear anything. >> I have no access to LN2440SBC but there is no reason for it to >> complain. >> Besides, the new AC97 controller driver(plus a machine driver for >> SMDKs with WM9713 attached to AC97 port) has been tested on all >> SoCs that I could get my hands on(6410, C100, C110 and V210). >> > It would be good if you could also confirm that AC97 warm reset, AC97 > cold reset and VRA (rates other than 48kHz) all work with the new > driver. Fwiw, it does sound like AC97 warm reset works since the WM9713 > probes (it's default state requires warm reset to wake up the link). New driver does cold and warm reset only in callback hooks. Link is enabled in ac97 read/write-reg when the status is not ACTIVE. VRA works too. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
