On Wed, 13 Jan 2010 14:13:08 -0500 Nickolas <ultrageek.lloyd@xxxxxxxxx> wrote: > On Wed, 13 Jan 2010 17:17:20 +0100 > Takashi Iwai <tiwai@xxxxxxx> wrote: > > > At Wed, 13 Jan 2010 11:06:11 -0500, > > Nickolas wrote: > > > > > > On Wed, 13 Jan 2010 09:14:32 +0100 > > > Takashi Iwai <tiwai@xxxxxxx> wrote: > > > > > > > At Tue, 12 Jan 2010 16:58:32 -0500, > > > > Nickolas wrote: > > > > > > > > > > this is a quick fix i wrote up a couple days ago to fix speaker > > > > > output on the Realtek ALC272 codec present in toshiba nb205 > > > > > netbooks. presently, speaker output doesn't work at all on this > > > > > model, regardless of settings in the mixer. this is because the > > > > > current driver thinks the speaker is at nid 0x0c instead of the > > > > > correct 0x17. i'm not too familiar with this hardware, so i'm not > > > > > sure that this patch won't have any negative effects for other > > > > > hardware. it also seems like a messy way of fixing the problem. > > > > > any comments or suggestions are welcome, as is testing for those who > > > > > have this board. diffed against the latest git. > > > > > > > > Thanks for the patch. The change looks safe to me. > > > > > > > > But I'm still wondering whether model=auto doesn't work for this device. > > > > Could you try it with the latest driver? > > > > > > > > > > > > thanks, > > > > > > > > Takashi > > > > > > > > > > hmm, i feel stupid. so, it works with model=auto, but why is that not implied when the model parameter isn't specified on the command line? > > > > OK, that's good to hear. IIRC, the quirk was there because it didn't work > > with model=auto, at least, at that time. > > > > I guess it's time to back to auto option again. I'll fix now. > > > > Thanks for quick testing! > > > > > > Takashi > > no problem. i'll test all the ports later today when i have time to make sure that they work properly with model=auto, just to be sure. thanks for the help! > > Nick sorry for the delay. it looks like everything works for the most part. there are a few problems, ie with mic input, but those are hopefully just configuration issues, but it is no worse than it was before with the quirk. hope that helps. Nick _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
