2010/1/6 Riccardo Magliocchetti <riccardo.magliocchetti@xxxxxxxxx>
> Hi Pierre,
>
> pl bossart ha scritto:
> > You haven't specified the buffer/period size in the hw params. See
> > alsa-lib/test/pcm.c
> > - Pierre
>
> They fail when opening default device so I had to remove them, work fine
> when opening
> plughw:0,0 though.
>
> > On Mon, Jan 4, 2010 at 11:39 AM, Riccardo Magliocchetti
> > <riccardo.magliocchetti@xxxxxxxxx> wrote:
> >> [the same message is waiting in moderator queue, sorry if you receive it
> two times]
> >>
> >> Hello,
> >>
> >> i'm trying to capture audio data from the microphone, but i'm not able
> to
> >> read any frames.
> >> The frames are always 0 and delay is fixed to 2730. I've tried calling
> >> snd_pcm_avail_delay, snd_pcm_avail_update but does not make a
> difference.
> >> The soundcard is driven by snd_hda_intel. The code is more or less the
> >> same as Paul Davis' tutorial on using the alsa api.
> >>
> >> This is the code for init and the loop that tries to read the data:
> >>
> >> #define MIC_BUFSIZE 4096
> >>
> >> static gpointer snd_pcm_read(gpointer data)
> >> {
> >> int error;
> >> snd_pcm_sframes_t frames = MIC_BUFSIZE;
> >>
> >> while (TRUE) {
> >>
> >> if ((error = snd_pcm_wait (pcm_handle, 1000)) < 0) {
> >> g_printerr("Failed to poll: %s\n", snd_strerror(error));
> >> continue;
> >> }
> >>
> >> if ((error = snd_pcm_avail(pcm_handle)) < 0) {
> >> if (error == -EPIPE) {
> >> g_printerr("xrun! %s\n", snd_strerror(error));
> >> continue;
> >> //return GINT_TO_POINTER(FALSE);
> >> } else {
> >> g_printerr("alsa_pcm_avail_update error %s\n",
> snd_strerror(error));
> >> continue;
> >> //return GINT_TO_POINTER(FALSE);
> >> }
> >> }
> >>
> >> frames = error;
> >> if (frames == 0)
> >> continue;
> >>
> >> frames = frames > MIC_BUFSIZE ? MIC_BUFSIZE : frames;
> >> g_printerr ("frames: %ld\n", frames);
> >> g_static_mutex_lock(&mutex);
> >> error = snd_pcm_readi(pcm_handle, Mic_Buffer[Mic_WriteBuf], frames);
> >> g_static_mutex_unlock(&mutex);
> >> if (error < 0)
> >> error = snd_pcm_recover(pcm_handle, error, 0);
> >> if (error < 0) {
> >> LOG("snd_pcm_readi FAIL!: %s\n", snd_strerror(error));
> >> }
> >> }
> >>
> >> return GINT_TO_POINTER(TRUE);
> >> }
> >>
> >> BOOL Mic_Init()
> >> {
> >> snd_pcm_hw_params_t *hwparams;
> >> snd_pcm_sw_params_t *swparams;
> >> int err;
> >>
> >> if (Mic_Inited)
> >> return TRUE;
> >>
> >> // Open the default sound card in capture
> >> if ((err = snd_pcm_open(&pcm_handle, "default",
> SND_PCM_STREAM_CAPTURE,
> >> /*SND_PCM_NONBLOCK*/ 0)) < 0) {
> >> g_printerr("Failed to open device: %s\n", snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> // Allocate the snd_pcm_hw_params_t structure and fill it.
> >> snd_pcm_hw_params_alloca(&hwparams);
> >> if ((err = snd_pcm_hw_params_any(pcm_handle, hwparams)) < 0) {
> >> g_printerr("Failed to setup hw parameters: %s\n",
> snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> //Set the access
> >> if ((err = snd_pcm_hw_params_set_access(pcm_handle, hwparams,
> >> SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) {
> >> g_printerr("Failed to set access: %s\n", snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> //dir 0 == exacte (Rate = 16K exacte)
> >> if ((err = snd_pcm_hw_params_set_rate(pcm_handle, hwparams, 16000,
> 0)) < 0) {
> >> g_printerr("Failed to set rate: %s\n", snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> /* Set sample format */
> >> if ((err = snd_pcm_hw_params_set_format(pcm_handle, hwparams,
> SND_PCM_FORMAT_S8)) < 0) {
> >> g_printerr("Failed to set format: %s\n", snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> // Set one channel (mono)
> >> if ((err = snd_pcm_hw_params_set_channels(pcm_handle, hwparams, 1))
> < 0) {
> >> g_printerr("Failed to set channels: %s\n", snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> //Set the params
> >> if ((err = snd_pcm_hw_params(pcm_handle, hwparams)) < 0) {
> >> g_printerr("Failed to set hw parameters: %s\n",
> snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> snd_pcm_sw_params_alloca(&swparams);
> >> if ((err = snd_pcm_sw_params_current (pcm_handle, swparams)) < 0) {
> >> g_printerr("Failed to set current sw parameters: %s\n",
> snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> if ((err = snd_pcm_sw_params_set_avail_min (pcm_handle, swparams,
> MIC_BUFSIZE)) < 0) {
> >> g_printerr("Failed to set minimum available count: %s\n",
> snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> if ((err = snd_pcm_sw_params_set_start_threshold (pcm_handle,
> swparams, 0U)) < 0) {
> >> g_printerr("Failed to set start mode: %s\n", snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> if ((err = snd_pcm_sw_params (pcm_handle, swparams)) < 0) {
> >> g_printerr("Failed to set sw parameters: %s\n",
> snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> if ((err = snd_pcm_prepare (pcm_handle)) < 0) {
> >> g_printerr("Failed to prepare audio interface to use: %s\n",
> snd_strerror(err));
> >> return FALSE;
> >> }
> >>
> >> Mic_Inited = TRUE;
> >> Mic_Reset();
> >>
> >> mic_reader = g_thread_create(snd_pcm_read, NULL, TRUE, NULL);
> >>
> >> return TRUE;
> >> }
> >>
> >>
> >> thanks,
> >> Riccardo
> >>
>
Even 4096 bytes is x86 DMA page size , seem to be a good choice for those
PCI sound cards, however you cannot assume all sound cards/plugins support
this buffer size
If you did not set period_size, buffer_size or periods (period_time,
buffer_time or periods) , you should call
snd_pcm_hw_params_get_buffer_size() and snd_pcm_hw_params_get_period_size()
after snd_pcm_hw_params()
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
