Missed a coupld #ifdefs, resending.
The current Realtek code makes no specific provision for turning stuff
off. The codec chip is placed into low-power mode generically, but this
doesn't turn off any external hardware connected to it, in particular
external amplifiers.
This patch creates a hook function that is called by the codec
suspend/resume functions. It ought to disable any external hardware in a
device-specific way. I've implemented a generic ALC889 function that
sets the EAPD pin properly, and used it for the Acer Aspire 8930G which
can benefit from this feature.
On my laptop, this results in ~0.5W extra savings.
--
Hector Martin (hector@xxxxxxxxxxxxxx)
Public Key: http://www.marcansoft.com/marcan.asc
Signed-off-by: Hector Martin <hector@xxxxxxxxxxxxxx>
--- linux-2.6.32/sound/pci/hda/patch_realtek_orig.c 2009-12-20 19:31:08.940900751 +0100
+++ linux-2.6.32/sound/pci/hda/patch_realtek.c 2009-12-20 22:14:11.852025021 +0100
@@ -334,6 +334,9 @@
/* hooks */
void (*init_hook)(struct hda_codec *codec);
void (*unsol_event)(struct hda_codec *codec, unsigned int res);
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+ void (*power_hook)(struct hda_codec *codec, int power);
+#endif
/* for pin sensing */
unsigned int sense_updated: 1;
@@ -385,6 +388,7 @@
void (*init_hook)(struct hda_codec *);
#ifdef CONFIG_SND_HDA_POWER_SAVE
struct hda_amp_list *loopbacks;
+ void (*power_hook)(struct hda_codec *codec, int power);
#endif
};
@@ -897,6 +901,7 @@
spec->unsol_event = preset->unsol_event;
spec->init_hook = preset->init_hook;
#ifdef CONFIG_SND_HDA_POWER_SAVE
+ spec->power_hook = preset->power_hook;
spec->loopback.amplist = preset->loopbacks;
#endif
@@ -1824,6 +1845,16 @@
spec->autocfg.speaker_pins[2] = 0x1b;
}
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+static void alc889_power_eapd(struct hda_codec *codec, int power)
+{
+ snd_hda_codec_write(codec, 0x14, 0,
+ AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0);
+ snd_hda_codec_write(codec, 0x15, 0,
+ AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0);
+}
+#endif
+
/*
* ALC880 3-stack model
*
@@ -3611,12 +3642,29 @@
snd_hda_detach_beep_device(codec);
}
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+static int alc_suspend(struct hda_codec *codec, pm_message_t state)
+{
+ struct alc_spec *spec = codec->spec;
+ if (spec && spec->power_hook)
+ spec->power_hook(codec, 0);
+ return 0;
+}
+#endif
+
#ifdef SND_HDA_NEEDS_RESUME
static int alc_resume(struct hda_codec *codec)
{
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+ struct alc_spec *spec = codec->spec;
+#endif
codec->patch_ops.init(codec);
snd_hda_codec_resume_amp(codec);
snd_hda_codec_resume_cache(codec);
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+ if (spec && spec->power_hook)
+ spec->power_hook(codec, 1);
+#endif
return 0;
}
#endif
@@ -3633,6 +3677,7 @@
.resume = alc_resume,
#endif
#ifdef CONFIG_SND_HDA_POWER_SAVE
+ .suspend = alc_suspend,
.check_power_status = alc_check_power_status,
#endif
};
@@ -9320,6 +9365,9 @@
.unsol_event = alc_automute_amp_unsol_event,
.setup = alc889_acer_aspire_8930g_setup,
.init_hook = alc_automute_amp,
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+ .power_hook = alc889_power_eapd,
+#endif
},
[ALC888_ACER_ASPIRE_7730G] = {
.mixers = { alc883_3ST_6ch_mixer,
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
